Generated by kicad-footprint-generator · KiCad file format 20260206
PT7C4302WEX
Diodes Incorporated · Real-time Clocks (RTC) · SOIC-8
PT7C4302WEX from Diodes Incorporated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC2 | power_in | Primary power input; VCC2 powers the IC when it is more than 0.2V above VCC1, and VCC1 powers it while VCC2 is below VCC1. |
| 2 | X1 | input | Oscillator circuit input, connected together with X2 across the 32.768kHz crystal. |
| 3 | X2 | output | Oscillator circuit output, connected together with X1 across the 32.768kHz crystal. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | RST | input | Reset input that must be asserted high during a read or write, with a 40kΩ internal pull-down resistor. |
| 6 | I/O | bidirectional | Serial data input/output for the 3-wire serial interface, with a 40kΩ internal pull-down resistor. |
| 7 | SCLK | input | Serial clock input that synchronizes data movement on the 3-wire serial interface, with a 40kΩ internal pull-down resistor. |
| 8 | VCC1 | power_in | Backup power input; if connected to a battery, VCC1 must be lower than VCC2 - 0.2V when the IC is read or written. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOIC-8 |
| Category | Clock and Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| Supply voltage to ground potential (VCC to GND) | -0.3 | 6.5 | V | 3 | |||
| DC input (all other inputs except VCC and GND) | -0.3 | 6.5 | V | 3 | |||
| Power dissipation | 320 | mW | Depend on package | 3 | |||
| Backup power voltage | VCC1 | 1.5 | 5.5 | V | 3 | ||
| Timing data and RAM data maintaining voltage | VCC2 | 1.2 | 5.5 | V | Timing data and RAM data maintaining voltage | 3 | |
| Timing data writing voltage | VCC2 | 1.5 | 5.5 | V | Timing data writing voltage | 3 | |
| Timing data reading voltage | VCC2 | 1.5 | 5.5 | V | Timing data reading voltage | 3 | |
| RAM data writing voltage | VCC2 | 3 | 5.5 | V | RAM data writing voltage | 3 | |
| RAM data reading voltage | VCC2 | 1.5 | 5.5 | V | RAM data reading voltage | 3 | |
| Input high level | VIH | 2 | V | max printed as VCC+0.3 | 3 | ||
| Input low level | VIL | -0.3 | 0.3 | V | 3 | ||
| Operating temperature | TA | -40 | 85 | ºC | 3 | ||
| Current consumption VCC1, OSC on | ICC1 | 0.4 | mA | OSC on, Note 2, 5; VCC1: 2V | 3 | ||
| Current consumption VCC1, OSC on | ICC1 | 1.2 | mA | OSC on, Note 2, 5; VCC1: 5V | 3 | ||
| Current consumption VCC2, OSC on | ICC2 | 0.425 | mA | OSC on, Note 2, 6; VCC1: 2V | 3 | ||
| Current consumption VCC2, OSC on | ICC2 | 1.28 | mA | OSC on, Note 2, 6; VCC1: 5V | 3 | ||
| Current consumption VCC2, OSC on | ICC2 | 25.3 | A | OSC on, Note 1, 6; VCC1: 2V | 3 | ||
| Current consumption VCC2, OSC on | ICC2 | 81 | A | OSC on, Note 1, 6; VCC1: 5V | 3 | ||
| Current consumption VCC2, OSC off | ICC2 | 25 | A | OSC off, Note 4, 6; VCC1: 2V | 3 | ||
| Current consumption VCC2, OSC off | ICC2 | 80 | A | OSC off, Note 4, 6; VCC1: 5V | 3 | ||
| Low-level input voltage SCL, /RST | VIL1 | 1.1 | 0.8 | V | VCC1: 5V | 3 | |
| Low-level input voltage SCL, /RST | VIL1 | 0.6 | 0.4 | V | VCC1: 2V | 3 | |
| High-level input voltage SCL, /RST | VIH1 | 2 | 1.3 | V | VCC1: 5V | 3 | |
| High-level input voltage SCL, /RST | VIH1 | 1.4 | 0.9 | V | VCC1: 2V | 4 | |
| Low-level input voltage X1 | VIL2 | 1.9 | 0.8 | V | VCC1: 5V | 4 | |
| Low-level input voltage X1 | VIL2 | 0.9 | 0.6 | V | VCC1: 2V | 4 | |
| High-level input voltage X1 | VIH2 | 2 | 1.9 | V | VCC1: 5V | 4 | |
| High-level input voltage X1 | VIH2 | 1.4 | 0.9 | V | VCC1: 2V | 4 | |
| Low-level output voltage I/O | VOL | 0.08 | 0.4 | V | IOH = 1.5mA, VCC = 2V | 4 | |
| Low-level output voltage I/O | VOL | 0.11 | 0.4 | V | IOH = 4.0mA, VCC = 5V | 4 | |
| High-level output voltage I/O | VOH | 1.6 | 1.9 | V | IOH = -0.4mA, VCC = 2V | 4 | |
| High-level output voltage I/O | VOH | 2.4 | 4.9 | V | IOH = -1.0mA, VCC = 5V | 4 | |
| Input leakage current /RST, SCLK | IIL | 500 | A | Note 3 | 4 | ||
| Output current when OFF I/O | IOZ | 500 | A | Note 3 | 4 | ||
| Data to CLK setup | tDC | 200 | ns | VCC=2.0V | 4 | ||
| Data to CLK setup | tDC | 50 | ns | VCC=5.0V | 4 | ||
| CLK to data hold | tCDH | 280 | ns | VCC=2.0V | 4 | ||
| CLK to data hold | tCDH | 70 | ns | VCC=5.0V | 4 | ||
| CLK to data delay | tCDD | 800 | ns | VCC=2.0V | 4 | ||
| CLK to data delay | tCDD | 200 | ns | VCC=5.0V | 4 | ||
| CLK low time | tCL | 1000 | ns | VCC=2.0V | 4 | ||
| CLK low time | tCL | 250 | ns | VCC=5.0V | 4 | ||
| CLK high time | tCH | 1000 | ns | VCC=2.0V | 4 | ||
| CLK high time | tCH | 250 | ns | VCC=5.0V | 4 | ||
| CLK frequency | tCLK | 0.5 | MHz | VCC=2.0V | 4 | ||
| CLK frequency | tCLK | 0 | 2 | MHz | VCC=5.0V | 4 | |
| CLK rise and fall | tR,tF | 2000 | ns | VCC=2.0V | 5 | ||
| CLK rise and fall | tR,tF | 500 | ns | VCC=5.0V | 5 | ||
| RST to CLK setup | tCC | 4 | s | VCC=2.0V | 5 | ||
| RST to CLK setup | tCC | 1 | s | VCC=5.0V | 5 | ||
| CLK to RST hold | tCCH | 240 | ns | VCC=2.0V | 5 | ||
| CLK to RST hold | tCCH | 60 | ns | VCC=5.0V | 5 | ||
| RST inactive time | tCWH | 4 | s | VCC=2.0V | 5 | ||
| RST inactive time | tCWH | 1 | s | VCC=5.0V | 5 | ||
| RST to I/O High-Z | tCDZ | 280 | ns | VCC=2.0V | 5 | ||
| RST to I/O High-Z | tCDZ | 70 | ns | VCC=5.0V | 5 | ||
| SCLK to I/O High-Z | tCCZ | 280 | ns | VCC=2.0V | 5 | ||
| SCLK to I/O High-Z | tCCZ | 70 | ns | VCC=5.0V | 5 |
CAD (KiCad official)
- Symbol:
PT7C4302WEX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pt7c4302wex-etched.step/pt7c4302wex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt7c4302wex.step/pt7c4302wex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (16 pp, sha256
e842f2e34434df13, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).