main
Ray
Publish 0.1.0
413ae7c
PT4213A
Texas Instruments · Power Supplies - Board Mount · 6-DIP Module
PT4213A from Texas Instruments, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vout | power_out | Positive regulated output of the converter, 5V nominal for the PT4213 with output current up to 1.2A. |
| 2 | -Vout | power_out | Negative output terminal and return for the regulated output, referenced to +Vout. |
| 8 | N/C | unconnected | No connection; the datasheet lists this pin as not connected. |
| 11 | Remote On/Off | input | Remote on/off control referenced to -Vin with an internal pull-up: a voltage of 1.0V max disables the output, open-circuit enables it, and it must be driven by an open-collector or open-drain device without a direct pull-up resistor. |
| 17 | -Vin | power_in | Negative input supply terminal and ground reference for the input voltage and Remote On/Off control, with the 38V to 75V input range applied between +Vin and -Vin. |
| 18 | +Vin | power_in | Positive input supply terminal, with an input voltage range of 38V to 75V with respect to -Vin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 6-DIP Module |
| Category | Power Supplies - Board Mount |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current | Io | 0 | 1.2 | A | Over Vin range | 1 | |
| Output Voltage Tolerance | ∆Vo | 4.85 | 5.25 | V | Over Vin range, 10%Iomax ≤ Io ≤Iomax, -40°C < Ta <85°C | 1 | |
| Idling Voltage | Vo | 5.4 | 5.9 | V | Io = 0A | 1 | |
| Line Regulation | Regline | -20 | 20 | mV | Over Vin range @ max Io | 1 | |
| Load Regulation | Regload | -100 | 100 | mV | Vin =53V, 10%Iomax ≤ Io ≤Iomax | 1 | |
| Current Limit | Ilim | 3 | A | Over Vin range | 1 | ||
| Short Circuit Current | Isc | 1.5 | A | Over Vin range | 1 | ||
| Inrush Current | Iir | 0.5 | A | Vin = 53V @ max Io | 1 | ||
| Inrush Current Time | tir | 1 | mSec | On start-up | 1 | ||
| Input Voltage Range | Vin | 38 | 75 | V | Over Io range | 1 | |
| Vo Ripple/Noise | Vn | 30 | 70 | mVpp | Vin= 53V, Io=Io max | 1 | |
| Transient Response | ttr | 200 | µSec | Vin =53V, 10%..100%Iomax, 50% load step | 1 | ||
| Vo Over/Undershoot | -250 | 150 | mV | 1 | |||
| Efficiency | η | 82 | % | Vin=53V, Io=1.2A, PT4213 | 1 | ||
| Switching Frequency | ƒo | 400 | 500 | kHz | Over Vin and Io ranges | 1 | |
| Operating Temperature | Ta | -40 | 85 | °C | Over Vin range | 1 | |
| Storage Temperature | Ts | -40 | 125 | °C | 1 | ||
| Isolation | 1500 | VDC | 1 | ||||
| Remote On/Off Disable Voltage | -0.1 | 1 | V | Referenced to -Vin (pin 17) | 3 | ||
| Remote On/Off Enable Voltage | 5 | V | Referenced to -Vin (pin 17) | 3 | |||
| Remote On/Off Open-Circuit Voltage | Vo/c | 10 | V | Open-circuit | 3 | ||
| Remote On/Off Input Current | Iin | -100 | µA | Pin 11 at -Vin | 3 | ||
| UVLO Threshold | -2 | 36 | 2 | V | Series PT4210, Vin range 38-75V | 3 |
CAD (Adom-generated)
- Symbol:
PT4213A - Footprint:
Adom_Gen:Texas_Instruments_PT4213_41cb54 - 3D model: generated to fit the land (STEP)
- 3D model files:
pt4213a-etched.step/pt4213a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt4213a.step/pt4213a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (5 pp, sha256
0dd123244efe2f62, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# PT4213A
**Texas Instruments** · Power Supplies - Board Mount · 6-DIP Module
PT4213A from Texas Instruments, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vout | power_out | Positive regulated output of the converter, 5V nominal for the PT4213 with output current up to 1.2A. |
| 2 | -Vout | power_out | Negative output terminal and return for the regulated output, referenced to +Vout. |
| 8 | N/C | unconnected | No connection; the datasheet lists this pin as not connected. |
| 11 | Remote On/Off | input | Remote on/off control referenced to -Vin with an internal pull-up: a voltage of 1.0V max disables the output, open-circuit enables it, and it must be driven by an open-collector or open-drain device without a direct pull-up resistor. |
| 17 | -Vin | power_in | Negative input supply terminal and ground reference for the input voltage and Remote On/Off control, with the 38V to 75V input range applied between +Vin and -Vin. |
| 18 | +Vin | power_in | Positive input supply terminal, with an input voltage range of 38V to 75V with respect to -Vin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 6-DIP Module |
| Category | Power Supplies - Board Mount |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current | Io | 0 | | 1.2 | A | Over Vin range | 1 |
| Output Voltage Tolerance | ∆Vo | 4.85 | | 5.25 | V | Over Vin range, 10%Iomax ≤ Io ≤Iomax, -40°C < Ta <85°C | 1 |
| Idling Voltage | Vo | | 5.4 | 5.9 | V | Io = 0A | 1 |
| Line Regulation | Regline | -20 | | 20 | mV | Over Vin range @ max Io | 1 |
| Load Regulation | Regload | -100 | | 100 | mV | Vin =53V, 10%Iomax ≤ Io ≤Iomax | 1 |
| Current Limit | Ilim | | 3 | | A | Over Vin range | 1 |
| Short Circuit Current | Isc | | 1.5 | | A | Over Vin range | 1 |
| Inrush Current | Iir | | 0.5 | | A | Vin = 53V @ max Io | 1 |
| Inrush Current Time | tir | | 1 | | mSec | On start-up | 1 |
| Input Voltage Range | Vin | 38 | | 75 | V | Over Io range | 1 |
| Vo Ripple/Noise | Vn | | 30 | 70 | mVpp | Vin= 53V, Io=Io max | 1 |
| Transient Response | ttr | | 200 | | µSec | Vin =53V, 10%..100%Iomax, 50% load step | 1 |
| Vo Over/Undershoot | | -250 | | 150 | mV | | 1 |
| Efficiency | η | | 82 | | % | Vin=53V, Io=1.2A, PT4213 | 1 |
| Switching Frequency | ƒo | 400 | | 500 | kHz | Over Vin and Io ranges | 1 |
| Operating Temperature | Ta | -40 | | 85 | °C | Over Vin range | 1 |
| Storage Temperature | Ts | -40 | | 125 | °C | | 1 |
| Isolation | | 1500 | | | VDC | | 1 |
| Remote On/Off Disable Voltage | | -0.1 | | 1 | V | Referenced to -Vin (pin 17) | 3 |
| Remote On/Off Enable Voltage | | 5 | | | V | Referenced to -Vin (pin 17) | 3 |
| Remote On/Off Open-Circuit Voltage | Vo/c | | | 10 | V | Open-circuit | 3 |
| Remote On/Off Input Current | Iin | | -100 | | µA | Pin 11 at -Vin | 3 |
| UVLO Threshold | | -2 | 36 | 2 | V | Series PT4210, Vin range 38-75V | 3 |
## CAD (Adom-generated)
- Symbol: `PT4213A`
- Footprint: `Adom_Gen:Texas_Instruments_PT4213_41cb54`
- 3D model: generated to fit the land (STEP)
- 3D model files: `pt4213a-etched.step` / `pt4213a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pt4213a.step` / `pt4213a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/1/PT4210_14.pdf) (5 pp, sha256 `0dd123244efe2f62`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/pt4213a-datasheet.pdf)