main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs pt4119ee89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pt4119ee89e: viewers · Ray
package.json Publish 0.2.0 · Ray
page.json pt4119ee89e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
pt4119ee89e-etched.fit.json pt4119ee89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4119ee89e-etched.glb pt4119ee89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4119ee89e-etched.step pt4119ee89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4119ee89e.glb Publish 0.1.0 · Ray
pt4119ee89e.kicad_mod Publish 0.1.0 · Ray
pt4119ee89e.kicad_sym Publish 0.1.0 · Ray
pt4119ee89e.lbr Publish 0.1.0 · Ray
pt4119ee89e.step Publish 0.1.0 · Ray
README.md pt4119ee89e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PT4119EE89E

PowTech CR PowTech Shanghai · LED Drivers · SOT-89-5

PT4119EE89E from PowTech CR PowTech Shanghai, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch output. SW is the drain of the internal N-channel MOSFET power switch (R_DS(on) ~0.6Ω typ). Connects to the external inductor / freewheeling Schottky diode node in the buck topology; rated up to 1A continuous switch current and 55V absolute max.
2 GND power_in Signal and power ground. Connect directly to the ground plane for both signal reference and current return of the internal MOSFET.
3 DIM input Logic-level dimming / enable input. Drive DIM low (<0.3V) to turn off the current regulator (shutdown), drive high (≥2.5V) to enable full LED current. Accepts PWM dimming from 100Hz up to 20kHz, or a DC voltage (0.5V-2.5V) for analog brightness control. Internally pulled up (~200kΩ) to a 4.2V internal supply.
4 CSN input Current sense input (high-side). Connect to the low side of the external sense resistor R_CS between VIN and CSN. Nominal mean sense threshold V_IN - V_CSN = 200mV (194-206mV); sets LED current as I_OUT = 0.2/R_CS. Input current ~8µA at 50mV differential.
5 VIN power_in Input supply pin, 6V to 50V operating (55V abs max). Must be locally bypassed with a low-ESR capacitor (≥10µF X7R/X5R recommended) placed close to the IC. Also the high side of the external current-sense resistor R_CS.
EP Exposed PAD passive Exposed thermal pad on the underside of the SOT89-5. Internally connected to GND; solder to a ground copper pour for lower thermal resistance (θ_JA = 45 °C/W).

Key specifications

Parameter Value
Manufacturer PowTech CR PowTech Shanghai
Package SOT-89-5
Category LED-drv
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • PT4119EE89E

CAD (KiCad official)

  • Symbol: PT4119EE89E
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: pt4119ee89e-etched.step / pt4119ee89e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt4119ee89e.step / pt4119ee89e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pt4119ee89e.step 86 KB You want the bare part, or you mark your own boards.
pt4119ee89e-etched.step 1.7 MB You want the part with PT4119EE89E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 421 faces against 26 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PowTech CR PowTech Shanghai datasheet (11 pp, sha256 2b280419597fab93, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF