← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SW", "type": "output",- "description": "Switch output. SW is the drain of the internal N-channel MOSFET power switch (R_DS(on) ~0.6\u03a9 typ). Connects to the external inductor / freewheeling Schottky diode node in the buck topology; rated up to 1A continuous switch current and 55V absolute max."+ "description": "Switch output. SW is the drain of the internal N-channel MOSFET power switch (R_DS(on) ~0.6Ω typ). Connects to the external inductor / freewheeling Schottky diode node in the buck topology; rated up to 1A continuous switch current and 55V absolute max." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "DIM", "type": "input",- "description": "Logic-level dimming / enable input. Drive DIM low (<0.3V) to turn off the current regulator (shutdown), drive high (\u22652.5V) to enable full LED current. Accepts PWM dimming from 100Hz up to 20kHz, or a DC voltage (0.5V-2.5V) for analog brightness control. Internally pulled up (~200k\u03a9) to a 4.2V internal supply."+ "description": "Logic-level dimming / enable input. Drive DIM low (<0.3V) to turn off the current regulator (shutdown), drive high (≥2.5V) to enable full LED current. Accepts PWM dimming from 100Hz up to 20kHz, or a DC voltage (0.5V-2.5V) for analog brightness control. Internally pulled up (~200kΩ) to a 4.2V internal supply." }, { "number": "4", "name": "CSN", "type": "input",- "description": "Current sense input (high-side). Connect to the low side of the external sense resistor R_CS between VIN and CSN. Nominal mean sense threshold V_IN - V_CSN = 200mV (194-206mV); sets LED current as I_OUT = 0.2/R_CS. Input current ~8\u00b5A at 50mV differential."+ "description": "Current sense input (high-side). Connect to the low side of the external sense resistor R_CS between VIN and CSN. Nominal mean sense threshold V_IN - V_CSN = 200mV (194-206mV); sets LED current as I_OUT = 0.2/R_CS. Input current ~8µA at 50mV differential." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input supply pin, 6V to 50V operating (55V abs max). Must be locally bypassed with a low-ESR capacitor (\u226510\u00b5F X7R/X5R recommended) placed close to the IC. Also the high side of the external current-sense resistor R_CS."+ "description": "Input supply pin, 6V to 50V operating (55V abs max). Must be locally bypassed with a low-ESR capacitor (≥10µF X7R/X5R recommended) placed close to the IC. Also the high side of the external current-sense resistor R_CS." }, { "number": "EP", "name": "Exposed PAD", "type": "passive",- "description": "Exposed thermal pad on the underside of the SOT89-5. Internally connected to GND; solder to a ground copper pour for lower thermal resistance (\u03b8_JA = 45 \u00b0C/W)."+ "description": "Exposed thermal pad on the underside of the SOT89-5. Internally connected to GND; solder to a ground copper pour for lower thermal resistance (θ_JA = 45 °C/W)." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/pt4119ee89e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }