main
History Download
Ray pt4115ee89e: laser-etched CAD + chip hero (factory 2.0.0 backfill) 6733f4c

PT4115EE89E

PowTech CR PowTech Shanghai · LED Drivers · SOT-89-5

PT4115EE89E from PowTech CR PowTech Shanghai, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch output. Drain of the internal N-Channel MOSFET switch; connects to the inductor in the buck topology. Rated -0.3V to 55V, continuous SW current up to 1.5A with typical RDS(on) of 0.4 Ohm.
2 GND power_in Signal and power ground. Must connect directly to the ground plane for proper operation and thermal performance.
3 DIM input Logic level dimming input. Drive DIM low (<=0.3V) to disable the current regulator, high (>=2.5V) to enable full LED current. Accepts PWM (100Hz to 20kHz) or DC (0.5V to 2.5V) for brightness control; internally pulled up ~200k to a 4.2V internal supply. Absolute max -0.3V to 6V.
4 CSN input Current sense input. Connect to the LED-side of the external high-side current-sense resistor (Rcs); the device regulates VIN-VCSN to a typical 200mV (194-206mV) to set the average LED current. Absolute max +0.3V to -6.0V with respect to VIN.
5 VIN power_in Input supply pin. Must be locally bypassed with a ceramic capacitor. Operating range 6V to 50V; absolute max -0.3V to 55V; UVLO typically 4.5V rising with 0.3V hysteresis.
EP Exposed PAD passive Exposed thermal pad on the underside of the SOT89-5 package. Internally connected to GND; mount to a ground copper pour for lower thermal resistance (theta_JA = 45 C/W).

Key specifications

Parameter Value
Manufacturer PowTech CR PowTech Shanghai
Package SOT-89-5
Category LED-drv
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • PT4115EE89E

CAD (KiCad official)

  • Symbol: PT4115EE89E
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: pt4115ee89e-etched.step / pt4115ee89e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt4115ee89e.step / pt4115ee89e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PowTech CR PowTech Shanghai datasheet (11 pp, sha256 4f2364a03a8c1004, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF