main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs pt4115be89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pt4115be89e: viewers · Ray
package.json Publish 0.2.0 · Ray
page.json pt4115be89e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
pt4115be89e-etched.fit.json pt4115be89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4115be89e-etched.glb pt4115be89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4115be89e-etched.step pt4115be89e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pt4115be89e.glb Publish 0.1.0 · Ray
pt4115be89e.kicad_mod Publish 0.1.0 · Ray
pt4115be89e.kicad_sym Publish 0.1.0 · Ray
pt4115be89e.lbr Publish 0.1.0 · Ray
pt4115be89e.step Publish 0.1.0 · Ray
README.md pt4115be89e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PT4115BE89E

CRMICRO · LED Drivers · SOT-89-5

PT4115BE89E from CRMICRO, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch output. Drain of the internal N-MOS power switch. Connects to the buck inductor / freewheel Schottky diode cathode. Absolute max -0.3 to 45V.
2 GND power_in Signal and power ground. Connect directly to the ground plane.
3 DIM input Logic-level dimming input. Low (< 0.3V) disables the current regulator; high (> 2.5V) enables full LED current. Accepts PWM dimming (0.1kHz-20kHz) or analog DC dimming (0.5V-2.5V). Internal ~200kΩ pull-up to internal 5V rail. Absolute max -0.3 to 6V.
4 CSN input Current sense input. High-side sense; the current sense resistor RS is connected between CSN and VIN. Average sense threshold (VIN-VCSN) is 100mV typ with ±15% hysteresis, setting IOUT = 0.1/RS. Absolute max +0.3 to -6.0V relative to VIN.
5 VIN power_in Supply input, 6V to 40V operating (45V abs max). Must be bypassed with a low-ESR capacitor placed close to the pin (≥4.7µF for DC input; ~100µF tantalum for AC/low-voltage input).
EP Exposed PAD passive Exposed thermal pad on package bottom, internally tied to ground. Solder to PCB copper pour to reduce thermal resistance (θJA = 45 °C/W for SOT89-5).

Key specifications

Parameter Value
Manufacturer CRMICRO
Package SOT-89-5
Category LED-drv
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • PT4115BE89E

CAD (KiCad official)

  • Symbol: PT4115BE89E
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: pt4115be89e-etched.step / pt4115be89e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt4115be89e.step / pt4115be89e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pt4115be89e.step 86 KB You want the bare part, or you mark your own boards.
pt4115be89e-etched.step 1.7 MB You want the part with PT4115BE89E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 442 faces against 26 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: CRMICRO datasheet (8 pp, sha256 930dab31eabf58c0, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF