component
PT4115B89E-JSM
Public Made by Adomby adom
JSMSEMI LED Drivers, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
PT4115B89E-JSM
JSMSEMI · LED Drivers · SOT-89-5
PT4115B89E-JSM from JSMSEMI, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | bidirectional | Internal power MOSFET drain and switch node; the SW pin maximum current is 1.5 A and the internal MOS on-resistance is 300 mΩ for VIN = 6 V to 30 V. |
| 2 | VSS | power_in | Chip ground (GND) return for the controller and the reference for the DIM and CS thresholds. |
| 3 | DIM | input | Brightness (dimming) control input that accepts PWM or analog dimming; the output turns off and the part enters standby when DIM is below 0.3 V, the maximum DIM pin voltage is 6 V, the maximum dimming frequency is 20 kHz, and the pin may be left floating if dimming is not used. |
| 4 | CS | input | Current-sense input connected to the external sense resistor RCS; the VIN−VCS threshold is 95-105 mV (100 mV typ.) and the CS pin input current is 10 µA, and the sense resistor sets the LED output current. |
| 5 | VIN | power_in | Power supply input; the datasheet specifies a 5.5 V to 30 V operating range, and a 47 µF to 100 µF filter capacitor rated above the maximum input voltage is required at this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CS pin voltage (VIN-VCS) | VCS | 95 | 100 | 105 | mV | VIN-VCS | 4 |
| Maximum switching frequency | FSW_MAX | 1 | MHz | 4 | |||
| Maximum dimming frequency | FDIM | 20 | KHz | 4 | |||
| DIM input high level | VIH | 2.5 | V | 4 | |||
| DIM input low level | VIL | 0.3 | V | 4 | |||
| Max voltage on DIM pin | VMAX2 | 6 | V | 3 | |||
| SW pin maximum current | IMAX | 1.5 | A | 3 | |||
| Maximum power dissipation | PDMAX | 1.5 | W | 3 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | 3 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 3 | ||
| Soldering temperature (less than 30 s) | TSD | 240 | °C | time less than 30 s | 3 | ||
| ESD HBM | VHBM | 2000 | V | HBM | 3 | ||
| UVLO threshold (VIN rising from 0 V) | VUVLO | 5.1 | V | VIN=VCS, VDIM=VCC, VIN rising from 0 V | 4 | ||
| UVLO hysteresis | VHYS | 0.4 | V | 4 | |||
| Standby current | IST | 320 | uA | 4 | |||
| Current-sense high threshold | VCSH | 120 | mV | (VIN-VCS) rising from 0.1 V until DRV output goes low | 4 | ||
| Current-sense low threshold | VCSL | 80 | mV | (VIN-VCS) falling from 0.3 V until DRV output goes high | 4 | ||
| CS pin input current | ICS | 10 | uA | 4 | |||
| DIM floating voltage | VDIM | 5 | V | DIM floating | 4 | ||
| DIM pull-up resistance | RDIM | 500 | kΩ | 4 | |||
| Internal MOS on-resistance | RDSON | 300 | mΩ | VIN=6V~30V | 4 | ||
| Over-temperature regulation threshold | OTP_TH | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
PT4115B89E-JSM - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
pt4115b89e-jsm-etched.step/pt4115b89e-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt4115b89e-jsm.step/pt4115b89e-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (11 pp, sha256
51047885136650ff, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PT4115B89E-JSM
**JSMSEMI** · LED Drivers · SOT-89-5
PT4115B89E-JSM from JSMSEMI, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | bidirectional | Internal power MOSFET drain and switch node; the SW pin maximum current is 1.5 A and the internal MOS on-resistance is 300 mΩ for VIN = 6 V to 30 V. |
| 2 | VSS | power_in | Chip ground (GND) return for the controller and the reference for the DIM and CS thresholds. |
| 3 | DIM | input | Brightness (dimming) control input that accepts PWM or analog dimming; the output turns off and the part enters standby when DIM is below 0.3 V, the maximum DIM pin voltage is 6 V, the maximum dimming frequency is 20 kHz, and the pin may be left floating if dimming is not used. |
| 4 | CS | input | Current-sense input connected to the external sense resistor RCS; the VIN−VCS threshold is 95-105 mV (100 mV typ.) and the CS pin input current is 10 µA, and the sense resistor sets the LED output current. |
| 5 | VIN | power_in | Power supply input; the datasheet specifies a 5.5 V to 30 V operating range, and a 47 µF to 100 µF filter capacitor rated above the maximum input voltage is required at this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CS pin voltage (VIN-VCS) | VCS | 95 | 100 | 105 | mV | VIN-VCS | 4 |
| Maximum switching frequency | FSW_MAX | | | 1 | MHz | | 4 |
| Maximum dimming frequency | FDIM | | | 20 | KHz | | 4 |
| DIM input high level | VIH | 2.5 | | | V | | 4 |
| DIM input low level | VIL | | | 0.3 | V | | 4 |
| Max voltage on DIM pin | VMAX2 | | | 6 | V | | 3 |
| SW pin maximum current | IMAX | | | 1.5 | A | | 3 |
| Maximum power dissipation | PDMAX | | | 1.5 | W | | 3 |
| Operating junction temperature range | TJ | -40 | | 125 | °C | | 3 |
| Storage temperature range | TSTG | -55 | | 150 | °C | | 3 |
| Soldering temperature (less than 30 s) | TSD | | | 240 | °C | time less than 30 s | 3 |
| ESD HBM | VHBM | | | 2000 | V | HBM | 3 |
| UVLO threshold (VIN rising from 0 V) | VUVLO | | 5.1 | | V | VIN=VCS, VDIM=VCC, VIN rising from 0 V | 4 |
| UVLO hysteresis | VHYS | | 0.4 | | V | | 4 |
| Standby current | IST | | 320 | | uA | | 4 |
| Current-sense high threshold | VCSH | | 120 | | mV | (VIN-VCS) rising from 0.1 V until DRV output goes low | 4 |
| Current-sense low threshold | VCSL | | 80 | | mV | (VIN-VCS) falling from 0.3 V until DRV output goes high | 4 |
| CS pin input current | ICS | | 10 | | uA | | 4 |
| DIM floating voltage | VDIM | | 5 | | V | DIM floating | 4 |
| DIM pull-up resistance | RDIM | | 500 | | kΩ | | 4 |
| Internal MOS on-resistance | RDSON | | 300 | | mΩ | VIN=6V~30V | 4 |
| Over-temperature regulation threshold | OTP_TH | | 150 | | °C | | 4 |
## CAD (KiCad official)
- Symbol: `PT4115B89E-JSM`
- Footprint: `Package_TO_SOT_SMD:SOT-89-5`
- 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files: `pt4115b89e-jsm-etched.step` / `pt4115b89e-jsm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pt4115b89e-jsm.step` / `pt4115b89e-jsm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JSMSEMI datasheet](docs/pt4115b89e-jsm-datasheet.pdf) (11 pp, sha256 `51047885136650ff`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pt4115b89e-jsm-datasheet.pdf)