← Commit history
page.json: fold the "EP" entry into pin 2. On SOT-89-5 the tab is not a separate pad - it is that lead - so nothing was ever unconnected, but the page listed it as its own pin and pads.json reported pin-not-in-symbol for a pin that cannot exist. Target chosen because SOT-89-5 carries its heat slug as the centre lead, pad 2 - the largest pad, at the origin; the tab's description is merged into that pin rather than dropped.
2 files changed
+4−17
pads.json+2−9@@ -26,14 +26,7 @@ "5" ], "paste_apertures": 0,- "issues": [- {- "kind": "pin-not-in-symbol",- "pin": "EP",- "name": "Exposed PAD",- "detail": "page.json describes pin \"EP\" (Exposed PAD) from the datasheet, but the symbol has no such pin, so nothing can connect to it"- }- ],+ "issues": [], "pads": [ { "pad": "1",@@ -87,7 +80,7 @@ "pin": "2", "name": "GND", "type": "power_in",- "description": "Device ground return for the power stage and internal control circuitry. Should be tied to the input bypass-capacitor return and the exposed pad using a star-ground layout.",+ "description": "Device ground return for the power stage and internal control circuitry. Should be tied to the input bypass-capacitor return and the exposed pad using a star-ground layout. Also the package tab: exposed thermal pad on the underside of the SOT89-5 package. Provides the primary heat-dissipation path (θJA ≈ 45 °C/W) and is internally connected to ground. Must be soldered to a PCB copper plane and tied to the GND net.", "is_pin1": false, "source": { "geometry": "SOT-89-5.kicad_mod",
page.json+2−8@@ -15,7 +15,7 @@ "mpn": "PT4115", "manufacturer": "UMW", "package": "SOT-89-5",- "pin_count": 6,+ "pin_count": 5, "category": "LED-drv", "subcategory": "LED Drivers", "datasheet": "docs/pt4115-datasheet.pdf",@@ -40,7 +40,7 @@ "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground return for the power stage and internal control circuitry. Should be tied to the input bypass-capacitor return and the exposed pad using a star-ground layout."+ "description": "Device ground return for the power stage and internal control circuitry. Should be tied to the input bypass-capacitor return and the exposed pad using a star-ground layout. Also the package tab: exposed thermal pad on the underside of the SOT89-5 package. Provides the primary heat-dissipation path (\u03b8JA \u2248 45 \u00b0C/W) and is internally connected to ground. Must be soldered to a PCB copper plane and tied to the GND net." }, { "number": "3",@@ -59,12 +59,6 @@ "name": "VIN", "type": "power_in", "description": "Main supply input, 6 V to 30 V recommended (absolute max 35 V, UVLO \u2248 5.1 V rising, 500 mV hysteresis). A low-ESR bypass capacitor (\u2265 4.7 \u00b5F X5R/X7R) must be placed close to this pin."- },- {- "number": "EP",- "name": "Exposed PAD",- "type": "passive",- "description": "Exposed thermal pad on the underside of the SOT89-5 package. Provides the primary heat-dissipation path (\u03b8JA \u2248 45 \u00b0C/W) and is internally connected to ground. Must be soldered to a PCB copper plane and tied to the GND net." } ], "provenance": {