← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C347356). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+22−8
page.json+8−6@@ -26,13 +26,15 @@ "model_3d_step": "pt4115.step", "lbr": "pt4115.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C347356"+ }, "pins": [ { "number": "1", "name": "SW", "type": "output",- "description": "Drain of the internal high-side power MOSFET. Connects to the switching node between the inductor and the Schottky freewheeling diode. Rated -0.3 V to 35 V; on-resistance ~0.4 Ω at V_IN=24 V, ~0.6 Ω at V_IN=12 V; continuous current up to 1.2 A (absolute max 1.5 A)."+ "description": "Drain of the internal high-side power MOSFET. Connects to the switching node between the inductor and the Schottky freewheeling diode. Rated -0.3 V to 35 V; on-resistance ~0.4 \u03a9 at V_IN=24 V, ~0.6 \u03a9 at V_IN=12 V; continuous current up to 1.2 A (absolute max 1.5 A)." }, { "number": "2",@@ -44,25 +46,25 @@ "number": "3", "name": "DIM", "type": "input",- "description": "Multiplexed dimming / enable input. V_DIM < 0.3 V shuts the part down (I_Q ≈ 60 µA); 0.5 V ≤ V_DIM ≤ 2.5 V provides linear analog dimming; V_DIM ≥ 2.5 V (up to 5 V) gives full LED current. Also accepts PWM up to ~20 kHz (max 50 kHz) for PWM dimming. Internally pulled up to a ~5 V rail through ~200 kΩ, so it may be left floating for full-current operation."+ "description": "Multiplexed dimming / enable input. V_DIM < 0.3 V shuts the part down (I_Q \u2248 60 \u00b5A); 0.5 V \u2264 V_DIM \u2264 2.5 V provides linear analog dimming; V_DIM \u2265 2.5 V (up to 5 V) gives full LED current. Also accepts PWM up to ~20 kHz (max 50 kHz) for PWM dimming. Internally pulled up to a ~5 V rail through ~200 k\u03a9, so it may be left floating for full-current operation." }, { "number": "4", "name": "CSN", "type": "input",- "description": "Current-sense negative input. The external sense resistor R_S (≥ 0.082 Ω) is connected between VIN and CSN; the internal comparator regulates the average LED current to I_OUT = 0.1 / R_S with a ±5% accuracy (V_CSN threshold ≈ 100 mV, ±15% hysteresis). Rated 0.3 V to -6 V relative to VIN."+ "description": "Current-sense negative input. The external sense resistor R_S (\u2265 0.082 \u03a9) is connected between VIN and CSN; the internal comparator regulates the average LED current to I_OUT = 0.1 / R_S with a \u00b15% accuracy (V_CSN threshold \u2248 100 mV, \u00b115% hysteresis). Rated 0.3 V to -6 V relative to VIN." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Main supply input, 6 V to 30 V recommended (absolute max 35 V, UVLO ≈ 5.1 V rising, 500 mV hysteresis). A low-ESR bypass capacitor (≥ 4.7 µF X5R/X7R) must be placed close to this pin."+ "description": "Main supply input, 6 V to 30 V recommended (absolute max 35 V, UVLO \u2248 5.1 V rising, 500 mV hysteresis). A low-ESR bypass capacitor (\u2265 4.7 \u00b5F X5R/X7R) must be placed close to this pin." }, { "number": "EP", "name": "Exposed PAD", "type": "passive",- "description": "Exposed thermal pad on the underside of the SOT89-5 package. Provides the primary heat-dissipation path (θJA ≈ 45 °C/W) and is internally connected to ground. Must be soldered to a PCB copper plane and tied to the GND net."+ "description": "Exposed thermal pad on the underside of the SOT89-5 package. Provides the primary heat-dissipation path (\u03b8JA \u2248 45 \u00b0C/W) and is internally connected to ground. Must be soldered to a PCB copper plane and tied to the GND net." } ], "provenance": {
pt4115.lbr+14−2@@ -59,6 +59,12 @@ <smd name="3" x="-1.8500" y="-1.5000" dx="1.5000" dy="0.7000" layer="1"/> <smd name="4" x="1.8500" y="-1.5000" dx="1.5000" dy="0.7000" layer="1"/> <smd name="5" x="1.8500" y="1.5000" dx="1.5000" dy="0.7000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.7700" y="2.2100"/>+ <vertex x="-2.0100" y="2.5400"/>+ <vertex x="-1.5300" y="2.5400"/>+ <vertex x="-1.7700" y="2.2100"/>+ </polygon> <wire x1="-1.2500" y1="2.3600" x2="1.2500" y2="2.3600" width="0.1200" layer="21"/> <wire x1="1.2500" y1="-2.3600" x2="-1.2500" y2="-2.3600" width="0.1200" layer="21"/> <wire x1="-1.2500" y1="1.2500" x2="-0.2500" y2="2.2500" width="0.1000" layer="51"/>@@ -68,7 +74,7 @@ <wire x1="1.2500" y1="-2.2500" x2="-1.2500" y2="-2.2500" width="0.1000" layer="51"/> <text x="0" y="2.960" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.960" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.7700" y="2.2100"/><vertex x="-2.0100" y="2.5400"/><vertex x="-1.5300" y="2.5400"/><vertex x="-1.7700" y="2.2100"/></polygon></package>+</package> </packages> <symbols> <symbol name="PT4115">@@ -100,7 +106,13 @@ <connect gate="G$1" pin="VIN" pad="5"/> <connect gate="G$1" pin="CSN" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="PT4115" constant="no"/>+ <attribute name="MANUFACTURER" value="UMW" constant="no"/>+ <attribute name="LCSC_PN" value="C347356" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>