main
Ray pt4056: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e8b2f05
{
  "schema_version": 1,
  "type": "component",
  "slug": "pt4056",
  "title": "PT4056",
  "brief": "PUOLOP Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "pt4056"
  ],
  "component": {
    "mpn": "PT4056",
    "manufacturer": "PUOLOP",
    "package": "ESOP-8",
    "pin_count": 8,
    "category": "PMIC",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9eef5984a98448208b5c93b1bb1fcd84.pdf",
    "parts": {
      "symbol": "pt4056.kicad_sym",
      "footprint": "pt4056.kicad_mod",
      "model_3d": "pt4056-etched.glb",
      "model_3d_plain": "pt4056.glb",
      "model_3d_step": "pt4056-etched.step",
      "model_3d_step_plain": "pt4056.step",
      "lbr": "pt4056.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "TEMP",
        "type": "input",
        "description": "Battery temperature sense input. Connect to the output of an NTC thermistor divider on the battery pack. Charging is paused when V(TEMP) falls below 45% of Vcc (over-temp) or rises above 80% of Vcc (under-temp). Tie TEMP directly to GND to disable temperature monitoring while leaving other charge functions active."
      },
      {
        "number": "2",
        "name": "PROG",
        "type": "passive",
        "description": "Constant-current program and charge-current monitor pin. A resistor R_PROG from PROG to GND sets the fast-charge current: I_BAT = (V_PROG / R_PROG) × 1200, with V_PROG ≈ 1.0 V in constant-current mode (0.1 V during trickle). Pin voltage may be read to monitor instantaneous charge current. Max sink current 1200 µA; 2.0 µA internal pull-up."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground. Also serves as the thermal reference; connect the SOP-8 exposed pad to this net with a low-impedance copper pour to meet the 130 °C/W θJA assumed in the datasheet."
      },
      {
        "number": "4",
        "name": "Vcc",
        "type": "power_in",
        "description": "Input supply from a USB port or wall adapter, 4.0 V typ 5 V max 6 V (abs-max −0.3 V to 7 V). Powers the internal circuitry and the pass FET (R_ON ≈ 650 mΩ). When (Vcc − V_BAT) drops below ≈30 mV the part enters low-power shutdown and the BAT pin sinks less than 2 µA. Decouple with 10 µF near the pin."
      },
      {
        "number": "5",
        "name": "BAT",
        "type": "power_out",
        "description": "Charge current output to the positive terminal of the single-cell Li-ion / Li-polymer battery. Regulates to the 4.2 V float voltage (4.137-4.263 V) and delivers up to 1200 mA (abs-max) charge current. Leakage into the battery is <2 µA when the chip is disabled or in sleep. Auto-recharge triggers when V_BAT falls ≥150 mV below V_FLOAT."
      },
      {
        "number": "6",
        "name": "STDBY",
        "type": "output",
        "description": "Open-drain charge-complete indicator (active-low, name is bar-STDBY). Internal switch pulls the pin low when the charge cycle terminates; otherwise Hi-Z. Typical V_OL = 0.2 V at 3 mA sink, abs-max 10 V. Drives an LED to GND through a series resistor, or leave floating if unused."
      },
      {
        "number": "7",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge-in-progress indicator (active-low, name is bar-CHRG). Pulled low while the charger is delivering current to the battery; Hi-Z otherwise. With a 10 µF cap on BAT and no battery installed, pulses at ≈1-4 s to signal a missing battery. V_OL 0.2 V typ at 3 mA sink; abs-max 10 V."
      },
      {
        "number": "8",
        "name": "CE",
        "type": "input",
        "description": "Chip enable input. Logic high enables normal charging; logic low disables the charger and inhibits current into BAT. TTL and CMOS compatible; abs-max −0.3 V to 10 V. Tie to Vcc for always-on operation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9eef5984a98448208b5c93b1bb1fcd84.pdf",
        "pages": 11,
        "sha256": "2cc8eaa7b83f45d8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pt4056.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pt4056-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6b0df60fe2142c227e34fbdb2a6b2cb41f1f5da55a361d6ea644c7e98cb75f80",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "PUOLOP",
      "Package": "ESOP-8",
      "Category": "PMIC",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pt4056"
  ],
  "discovery_pitch": "PT4056 (PUOLOP) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pt4056.kicad_sym",
    "pt4056.kicad_mod",
    "pt4056.glb",
    "pt4056.step",
    "pt4056.lbr",
    "docs/hero.png",
    "docs/pt4056-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pt4056-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T04:34:22.259Z"
}