main
History Download
Ray Publish 0.1.0 ce8002c

PT2502

PTC(Princeton Tech) · Motor Driver ICs · SSOP-28-150mil

PT2502 from PTC(Princeton Tech), in a SSOP-28-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input I2C serial clock used to set and program OTP parameters.
2 SDA bidirectional I2C serial data used to set and program OTP parameters.
3 VPP power_in OTP programming voltage, 7.5V when programming and 5V in normal operation.
4 WL output W-phase low-side gate drive output to the external gate driver.
5 VL output V-phase low-side gate drive output to the external gate driver.
6 UL output U-phase low-side gate drive output to the external gate driver.
7 WH output W-phase high-side gate drive output to the external gate driver.
8 VH output V-phase high-side gate drive output to the external gate driver.
9 UH output U-phase high-side gate drive output to the external gate driver.
10 CLK unconnected CLK pin, left unconnected in the application circuit.
11 GND power_in Ground.
12 VDD power_in Supply input, 6V to 24V in the application circuit, decoupled with a capacitor.
13 VREG power_out Internal +5V LDO output supplying logic and analog circuits; also the VREG calibration point for the UI Kit VCON.
14 FWR input Forward/reverse direction command input; a reverse command decelerates the motor to coast and restarts in the opposite direction.
15 RSEN input Current sense pin shown in the application circuit.
16 RF input Current-sense voltage input for over-current detection and current limiting, which reduces PWM duty above the set threshold.
17 NC unconnected No connect.
18 OVP input Over-voltage protection input, enabled by the enOVP parameter, which puts the system in Lock-On State on over-voltage.
19 ZCU input U-phase back-EMF zero-crossing sense input.
20 ZCV input V-phase back-EMF zero-crossing sense input.
21 ZCW input W-phase back-EMF zero-crossing sense input.
22 ZCO input Back-EMF zero-crossing sense common (motor neutral) input.
23 COMI passive Compensation pin with an external capacitor in the application circuit.
24 FLT passive Filter pin connected to COMI through an external capacitor in the application circuit.
25 OSC_C passive Oscillator capacitor pin with an external capacitor to ground.
26 VSP input Speed command input by PWM duty or DC voltage (PWMIN), also usable for frequency speed control.
27 RD output RD output shown in the application circuit.
28 FG output Speed (FG) frequency output; also the 160kHz trim clock output used by the UI Kit FCON.

Key specifications

Parameter Value
Manufacturer PTC(Princeton Tech)
Package SSOP-28-150mil
Category Power Management ICs
Pins 28

CAD (KiCad official)

  • Symbol: PT2502
  • Footprint: Package_SO:SSOP-28_3.9x9.9mm_P0.635mm
  • 3D model: SSOP-28-150mil (KiCad packages3D, STEP)
  • 3D model files: pt2502-etched.step / pt2502-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt2502.step / pt2502.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PTC(Princeton Tech) datasheet, copy hosted by LCSC (21 pp, sha256 9c40daf3cff69469, retrieved 2026-11-21)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF