← Commit history

Publish 0.1.1

Ray ·594db710a5 · ·parent 352a1b8
4 files changed +420−11
package.json+151−4
@@ -1,6 +1,6 @@ {   "slug": "pt24c02",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "PUOLOP EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,153 @@     "docs/hero.png",     "docs/pt24c02-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "pt24c02-etched.step",+    "pt24c02-hero.glb",+    "pt24c02-hero.overlay.json"+  ],+  "component": {+    "mpn": "PT24C02",+    "manufacturer": "PUOLOP",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/730587efbe37982107f48fdcbda5ca67.pdf",+    "parts": {+      "symbol": "pt24c02.kicad_sym",+      "footprint": "pt24c02.kicad_mod",+      "model_3d": "pt24c02-hero.glb",+      "model_3d_plain": "pt24c02.glb",+      "model_3d_step": "pt24c02-etched.step",+      "model_3d_step_plain": "pt24c02.step",+      "lbr": "pt24c02.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "input",+        "description": "Device address input bit 0. Hard-wired to VCC or GND to set the I2C slave address for the PT24C02 (three address bits A2/A1/A0 allow up to eight devices on one bus)."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Device address input bit 1. Hard-wired to VCC or GND to set the I2C slave address for the PT24C02."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Device address input bit 2. Hard-wired to VCC or GND to set the I2C slave address for the PT24C02."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) for the device."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data. Open-drain bidirectional pin for I2C data transfer; requires an external pull-up resistor and may be wire-ORed with other open-drain devices on the bus."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input. Positive-edge clocks data into the EEPROM; negative-edge clocks data out. Requires an external pull-up resistor."+      },+      {+        "number": "7",+        "name": "WP",+        "type": "input",+        "description": "Write Protect. When tied to GND, normal read/write operations are allowed. When tied to VCC, the full 2K array is write-protected in hardware."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input. Operating range 1.7 V to 5.5 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/730587efbe37982107f48fdcbda5ca67.pdf",+        "pages": 14,+        "sha256": "46f82af43f3e981c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "pt24c02.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "pt24c02-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "0ebc602fa30c29bdf6e60ba9f880e7045e5a29b09b3186246f749a6ec552166e",+        "checked": "2026-11-03",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "PT24C02",+  "brief": "PUOLOP EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "PUOLOP",+      "Package": "SOP-8",+      "Category": "Memory",+      "Pins": "8"+    }+  },+  "discovery_triggers": [+    "pt24c02"+  ],+  "discovery_pitch": "PT24C02 (PUOLOP) component page with datasheet-verified CAD.",+  "visibility": "public"+}
page.json+9−7
@@ -4,7 +4,7 @@   "slug": "pt24c02",   "title": "PT24C02",   "brief": "PUOLOP EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -179,10 +179,12 @@     "docs/pt24c02-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pt24c02-etched.step"+    "pt24c02-etched.step",+    "pt24c02-hero.glb",+    "pt24c02-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-25T04:34:05.810Z"-}+  "visibility": "public",+  "updated_at": "2026-09-25T04:34:05.810Z",+  "description": "PUOLOP EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
pt24c02-hero.glbadded
⋯ 1 unchanged line ⋯
pt24c02-hero.overlay.jsonadded+260
@@ -0,0 +1,260 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "PT24C02",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 8,+      "span_mm": 6.9,+      "dash_mm": 0.1725,+      "gap_mm": 0.1035,+      "pad_stroke_mm": 0.0414+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.552,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -2.11,+      2.11+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -2.205,+      2.205+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "pt24c02-etched.glb",+    "glb_sha256": "eac875eeaf1c5fd180fa701c83ddb1dd940f161611c2556b535c98ea24d01722",+    "footprint": "pt24c02.kicad_mod",+    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+    "pins": "page.json component.pins",+    "pins_sha256": "9de16b42511161916a17e67bb5ba6b104fc7116898a0bab863abad21d6e1c4d4"+  },+  "generator": "adom-wiki 1.8.31 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "A0",+      "x": -3.6,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "A1",+      "x": -3.6,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "A2",+      "x": -3.6,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "GND",+      "x": -3.6,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "SDA",+      "x": 3.6,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "SCL",+      "x": 3.6,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "WP",+      "x": 3.6,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "VCC",+      "x": 3.6,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}