component
PR03000202200JAC00
Public Made by Adomby adom
Vishay Intertech Through Hole Resistors, 插件,D5.2xL16.7mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPR03000202200JAC00
Vishay Intertech · Through Hole Resistors · R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal
PR03000202200JAC00 from Vishay Intertech, in a R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code J = ±5 %) | -5 | 5 | % | Part-number tolerance code J | 3 | ||
| Temperature coefficient | -250 | 250 | ppm/K | (20 / -55 / 20) °C and (20 / 155 / 20) °C | 15 | ||
| Rated dissipation | P70 | 3 | W | P70; PR03 Cu-lead; 1 Ω ≤ R | 1 | ||
| Operating voltage Umax AC/DC | Umax | 750 | V | PR03 Cu-lead | 1 | ||
| Resistance range minimum | 1 | Ω | PR03 Cu-lead | 1 | |||
| Resistance range maximum | 1 | MΩ | PR03 Cu-lead | 1 | |||
| Endurance test permissible change (percent part) | ΔR/R | -5 | 5 | % | 1000 h; 1.5 h on / 0.5 h off; 70 °C; U = Umax | 16 | |
| Endurance test permissible change (absolute part) | ΔR | -0.1 | 0.1 | Ω | 1000 h; 1.5 h on / 0.5 h off; 70 °C; U = Umax | 16 | |
| Damp heat steady state permissible change (percent part) | ΔR/R | -3 | 3 | % | (40 ± 2) °C; 56 days; (93 ± 3) % RH | 16 | |
| Damp heat steady state permissible change (absolute part) | ΔR | -0.1 | 0.1 | Ω | (40 ± 2) °C; 56 days; (93 ± 3) % RH | 16 | |
| Dry heat permissible change (percent part) | ΔR/R | -1.5 | 1.5 | % | 200 °C; 16 h | 16 | |
| Dry heat permissible change (absolute part) | ΔR | -0.1 | 0.1 | Ω | 200 °C; 16 h | 16 | |
| Resistance to soldering heat permissible change (percent part) | ΔR/R | -1 | 1 | % | (260 ± 5) °C; (10 ± 1) s; unmounted components | 15 | |
| Resistance to soldering heat permissible change (absolute part) | ΔR | -0.05 | 0.05 | Ω | (260 ± 5) °C; (10 ± 1) s; unmounted components | 15 | |
| Rapid change of temperature permissible change (percent part) | ΔR/R | -2 | 2 | % | PR03; 30 min at -55 °C and 30 min at +200 °C; 5 cycles | 15 | |
| Rapid change of temperature permissible change (absolute part) | ΔR | -0.05 | 0.05 | Ω | PR03; 30 min at -55 °C and 30 min at +200 °C; 5 cycles | 15 | |
| Robustness of terminations permissible change (percent part) | ΔR/R | -0.5 | 0.5 | % | Tensile, bending, and torsion | 15 | |
| Robustness of terminations permissible change (absolute part) | ΔR | -0.05 | 0.05 | Ω | Tensile, bending, and torsion | 15 | |
| Bump permissible change (percent part) | ΔR/R | -0.5 | 0.5 | % | 3 x 1500 bumps in three directions; 40 g | 15 | |
| Bump permissible change (absolute part) | ΔR | -0.05 | 0.05 | Ω | 3 x 1500 bumps in three directions; 40 g | 15 | |
| Vibration permissible change (percent part) | ΔR/R | -0.5 | 0.5 | % | 10 Hz to 2000 Hz; 1.5 mm or 200 m/s² | 15 | |
| Vibration permissible change (absolute part) | ΔR | -0.05 | 0.05 | Ω | 10 Hz to 2000 Hz; 1.5 mm or 200 m/s² | 15 | |
| Insulation resistance minimum after dry heat | Rins | 1000 | MΩ | Dry heat 200 °C; 16 h (climatic sequence) | 16 | ||
| Applied maximum film temperature | F max. | 250 | °C | Applied maximum film temperature | 2 | ||
| Maximum permissible hot-spot temperature | 250 | °C | PR03 | 9 | |||
| Thermal resistance (Rth) | Rth | 60 | K/W | PR03 Cu-lead | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and | 4 |
CAD (KiCad official)
- Symbol:
PR03000202200JAC00 - Footprint:
Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal - 3D model: R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (20 pp, sha256
4757e2cacb7da337, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).