Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PMC271-S08

PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8

PMC271-S08 from PADAUK Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply, operating voltage range 2.2V to 5.5V.
2 PA6/X2 bidirectional Bit 6 of port A (digital input or two-state output with pull-up resistor) or X2 crystal oscillator output; bit 6 of padier must be 0 when used for the crystal to avoid leakage current.
3 PA7/X1 bidirectional Bit 7 of port A (digital input or two-state output with pull-up resistor) or X1 crystal oscillator input; bit 7 of padier must be 0 when used for the crystal to avoid leakage current.
4 PA0/INT0 bidirectional Bit 0 of port A (digital input or two-state output with pull-up resistor) or external interrupt line 0 accepting both rising and falling edges, also usable as wake-up from sleep.
5 PA3/AD5/COM3 bidirectional Bit 3 of port A (digital input or two-state output with pull-up resistor), ADC channel 5 input, or COM3 providing 1/2 VDD LCD bias; bit 3 of padier must be 0 when used as analog input.
6 PA4/AD6/COM4 bidirectional Bit 4 of port A (digital input or two-state output with pull-up resistor), ADC channel 6 input, or COM4 providing 1/2 VDD LCD bias; bit 4 of padier must be 0 when used as analog input.
7 PA5/PRST# bidirectional Bit 5 of port A (digital input or open-drain output, no pull-up resistor) or hardware reset input; a 33 ohm series resistor is recommended for noise immunity in input mode.
8 GND power_in Ground.

Key specifications

Parameter Value
Manufacturer PADAUK Tech
Package SOIC-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage VDD 2.2 5 5.5 V Subject to LVR tolerance 16
IO lines sink current IOL 7 10 13 mA VDD=5.0V, VOL=0.5V 16
IO lines drive current IOH -5 -7 -9 mA VDD=5.0V, VOH=4.5V 16
Pull-up Resistance RPH 62 100 210 KΩ VDD=5.0V / VDD=3.3V / VDD=2.2V (as printed, one condition per printed value) 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 1 of 8 (printed order) VLVR 3.86 4.15 4.44 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 2 of 8 (printed order) VLVR 3.35 3.6 3.85 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 3 of 8 (printed order) VLVR 2.84 3.05 3.26 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 4 of 8 (printed order) VLVR 2.61 2.8 3 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 5 of 8 (printed order) VLVR 2.37 2.55 2.73 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 6 of 8 (printed order) VLVR 2.04 2.2 2.35 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 7 of 8 (printed order) VLVR 1.86 2 2.14 V 16
Low Voltage Reset Voltage (Brown-out voltage), LVR row 8 of 8 (printed order) VLVR 1.67 1.8 1.93 V 16
Band-gap Reference Voltage (before calibration) VBG 1.104 1.2 1.296 V VDD=2.2V ~ 5.5V, -40°C <Ta<85°C* 16
Band-gap Reference Voltage (after calibration) VBG 1.14 1.2 1.26 V VDD=2.2V ~ 5.5V, -40°C <Ta<85°C* 16
Frequency of IHRC after calibration fIHRC 15.68 16 16.32 MHz 25°C, VDD=2.2V~5.5V 17
Frequency of IHRC after calibration fIHRC 14.72 16 17.28 MHz VDD=2.2V~5.5V, -40°C <Ta<85°C* 17
Frequency of ILRC fILRC 20.4 24 27.6 KHz VDD=5.0V, Ta=25°C 17
Frequency of ILRC fILRC 15.6 24 32.4 KHz VDD=5.0V, -40°C <Ta<85°C* 17
Frequency of ILRC fILRC 10.2 12 13.8 KHz VDD=3.3V, Ta=25°C 17
Frequency of ILRC fILRC 7.8 12 16.2 KHz VDD=3.3V, -40°C <Ta<85°C* 17
Input low voltage for IO lines VIL 0 V 16
AD Input Voltage VAD 0 V 17
AD Differential Non-Linearity AD DNL -0.5 0.5 LSB 17
AD Integral Non-Linearity AD INL -1 1 LSB 17
Supply Voltage VDD 2.2 5.5 V 18
Input Voltage VIN -0.3 V 18
Operating Temperature (PMC271 series) -40 85 °C 18
Storage Temperature -50 125 °C 18

CAD (KiCad official)

  • Symbol: PMC271-S08
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: pmc271-s08-etched.step / pmc271-s08-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pmc271-s08.step / pmc271-s08.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PADAUK Tech datasheet (90 pp, sha256 56d5a3beca7e9cf6, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF