PL8322

{
  "slug": "pl8322",
  "version": "0.1.0",
  "type": "component",
  "description": "POWLICON DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "pl8322",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pl8322.kicad_sym",
    "pl8322.kicad_mod",
    "pl8322.glb",
    "pl8322.step",
    "pl8322.lbr",
    "docs/hero.png",
    "docs/pl8322-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pl8322-hero.glb",
    "pl8322-hero.overlay.json",
    "pl8322-etched.glb"
  ],
  "component": {
    "mpn": "PL8322",
    "manufacturer": "POWLICON",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893363882381312",
    "parts": {
      "symbol": "pl8322.kicad_sym",
      "footprint": "pl8322.kicad_mod",
      "model_3d": "pl8322-hero.glb",
      "model_3d_plain": "pl8322-etched.glb",
      "model_3d_step": "pl8322-etched.step",
      "model_3d_step_plain": "pl8322.step",
      "lbr": "pl8322.lbr"
    },
    "distributor_links": {
      "lcsc": "C782008"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T01:07:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BST",
        "type": "power_out",
        "description": "Boot-strap pin: connect a 0.1µF or greater ceramic capacitor between SW and BST to power the high-side gate driver."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Power input supplied from a 6.5V to 36V source, to be bypassed to GND with a large capacitor plus at least 0.1uF ceramic placed close to the VIN and GND pins."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "output",
        "description": "Power switching pin connected to the inductor switching node."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input sensing the output voltage through a resistor divider to ground, with the datasheet noting it is a sensitive node to keep away from SW and BST and recommending a 47pF capacitor to GND; the internal reference is 1.2V."
      },
      {
        "number": "6",
        "name": "IADJ",
        "type": "passive",
        "description": "Resistor from IADJ to GND sets the load current limit and line drop compensation (typical range 10k-50k per Section 9.4)."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable digital input: drive high to turn the regulator on and low to turn it off; internally pulled to VIN through a large resistor, with an internal threshold of 1V."
      },
      {
        "number": "8",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start programming pin where a capacitor sets the soft-start time."
      },
      {
        "number": "9",
        "name": "EPAD",
        "type": "power_in",
        "description": "Exposed pad serving as power ground that must be connected to the PCB ground for full-load operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: EPAD is listed as pin 9 in the pin-function table but the ESOP-8 top-view drawing shows only pins 1-; BST is typed power_out as a bootstrap supply rail for the high-side driver; the datasheet does not a; IADJ and SS are typed passive because the datasheet only describes them as resistor/capacitor progra"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0625,
        "at": "2026-10-18T01:05:43"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893363882381312",
        "pages": 15,
        "sha256": "6e735715b7cbd555",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pl8322.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pl8322-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7a0c568180ca259cb71e9c765370b40f5924fc98368b80af38e744b94da28049",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}