main
Ray Publish 0.1.0 211c95d

PL611-01-F93TC

Microchip Tech · Clock Generators / Frequency Synthesizers / PLL · SOT-23-6L

PL611-01-F93TC from Microchip Tech, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLK1 output Programmable clock output, with standard drive of 10mA or high drive of 24mA.
2 GND power_in Ground connection.
3 XIN/FIN input Crystal or reference clock input pin, accepting a 10-30MHz fundamental crystal, a 3rd overtone crystal up to 75MHz, or a reference clock up to 200MHz.
4 XOUT output Crystal output pin.
5 CLK2/OE/PDB/FSEL bidirectional Programmable I/O pin configurable as clock output CLK2, Output Enable (OE) input, Power Down (PDB) input or Frequency Selection (FSEL) input, with an internal 60kOhm pull-up resistor.
6 VDD power_in Supply connection for 2.25V to 3.63V operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6L
Category RTC/Clock Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD -0.5 4.6 V 3
Storage Temperature TS -65 150 C 3
Ambient Operating Temperature -40 85 C 3
Crystal Input Frequency (XIN) Fundamental Crystal XIN 10 30 MHz Fundamental Crystal 3
Duty Cycle 45 50 55 % At VDD/2 3
Operating Voltage VDD 2.25 3.63 V 4
Crystal Loading Rating CL(xtal) 5 20 pF The IC can be programmed for any value in this range. 4
Supply Current, Dynamic, with Loaded Outputs IDD 15 mA At 10MHz, load=15pF (PDB=1) 4
Output Low Voltage VOL 0.4 V IOL = +4mA Standard drive 4
Short-circuit Current IS -50 50 mA 4

CAD (KiCad official)

  • Symbol: PL611-01-F93TC
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: pl611-01-f93tc-etched.step / pl611-01-f93tc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pl611-01-f93tc.step / pl611-01-f93tc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (6 pp, sha256 69289545145a915a, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF