main
History Download
Ray Publish 0.1.0 b9a6d4a

PJ9500M18SE

PJSEMI · Linear Voltage Regulators (LDO) · SOT-23-5

PJ9500M18SE from PJSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage, 1.8V to 6V operating range, decoupled with a 1µF ceramic capacitor to GND placed close to the device.
2 GND power_in Ground.
3 EN input Chip enable, active high (VIH min 1.2V, VIL max 0.9V), high impedance with internal 1MΩ pull-down to GND; tie to VIN if unused.
4 NC unconnected No connection.
5 VOUT power_out Regulated output voltage, up to 500mA load current, requires 1µF to 10µF output capacitor (ESR 5mΩ to 500mΩ) for stability.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 1.8 6 V VIN=VOUT+1V, CIN=1µF, COUT=1µF, TA=25℃ 7
Output Voltage Accuracy ∆VOUT -2 2 % VIN=5V, IOUT=10mA 7
Line Regulation ∆VLINE 1 3 mV VIN=(VOUT+2V)~7V, IOUT=1mA 7
Load Regulation ∆VLOAD 0.1 0.2 mV/mA VOUT=4V, IOUT=1~200mA 7
Short Circuit Current ISHORT 120 150 mA VEN=VIN, VOUT Short to GND 7
EN Input Threshold Logic Low VIL 0.9 V 7
EN Input Threshold Logic High VIH 1.2 V 7
Supply Voltage 1.8 6 V 6
Maximum Output Current 500 mA 6
Operating Ambient Temperature -40 125 °C 6
VIN to GND Voltage VIN -0.3 6 V 6
VEN to GND Voltage VEN -0.3 6 V 6
VOUT to VIN Voltage -0.3 5 V 6
Maximum Load Current 500 mA 6
Power Dissipation SOT-23-5 250 mW SOT-23-5 6
Operating Ambient Temperature (abs max table) -40 125 °C 6
Storage temperature range -40 150 °C 6
Lead Temperature 300 °C 10S 6
ESD Voltage HBM 4 KV HBM 6
ESD Voltage CDM 200 V CDM 6
Thermal Resistance, Junction-to-Ambient SOT-23-5 400 °C/W SOT-23-5 6
Quiescent Current IQ 800 nA VIN=5.0V, IOUT=0A 7
Maximum Output Current IOUT_Max 500 mA 7
Dropout Voltage VDROP 160 mV VIN=0.98*VOUT, IOUT=100mA, 1.8≤VOUT<2.8V 7
Current Limit ILIMIT 700 mA VIN=VOUT+1V 7
Thermal Shutdown Temperature TSHDN 129 °C Shutdown, Temp increasing 7
Thermal Reset Temperature 105 °C Reset, Temp decreasing 7
Power Supply Rejection Rate PSRR 60 dB VIN=5V, IOUT=10mA, f=1 KHz 7

CAD (KiCad official)

  • Symbol: PJ9500M18SE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: pj9500m18se-etched.step / pj9500m18se-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj9500m18se.step / pj9500m18se.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (16 pp, sha256 d7709c00ce45adff, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF