← Commit history

pj9193m25se: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·da4226b21a · ·parent fbcec71
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PJ9193M25SE",+    "manufacturer": "PJSEMI",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "pj9193m25se.kicad_sym",+      "footprint": "pj9193m25se.kicad_mod",+      "model_3d": "pj9193m25se-etched.glb",+      "model_3d_plain": "pj9193m25se.glb",+      "model_3d_step": "pj9193m25se-etched.step",+      "model_3d_step_plain": "pj9193m25se.step",+      "lbr": "pj9193m25se.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input voltage. Operating range 2V to 6.5V (absolute max -0.3V to +7V). Bypass to GND with a 1µF ceramic capacitor placed as close as possible to the pin for stability and noise decoupling."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the regulator. Return path for input and output capacitors; route with a wide, short copper trace back to this pin to minimize parasitic inductance/resistance."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Chip Enable, active high. CMOS logic input: VIH ≥ 1.2V starts up the regulator, VIL ≤ 0.4V shuts it down. Leakage typ. 1µA. High impedance pin - cannot be left floating; may be tied to VIN to keep the part always on."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND/VIN as convenient for layout; not electrically bonded to the die."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output voltage. Fixed 2.5V for the -25 option, up to 300mA (M current tap). Requires a minimum 1µF ceramic output capacitor (X5R/X7R) placed close to VOUT and GND for stability. Current limit typ. 450mA; short-circuit current typ. 50mA."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}