pj9193m12se

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PJ9193M12SE",+    "manufacturer": "PJSEMI",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "pj9193m12se.kicad_sym",+      "footprint": "pj9193m12se.kicad_mod",+      "model_3d": "pj9193m12se-etched.glb",+      "model_3d_plain": "pj9193m12se.glb",+      "model_3d_step": "pj9193m12se-etched.step",+      "model_3d_step_plain": "pj9193m12se.step",+      "lbr": "pj9193m12se.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input voltage. Operating range 2V to 6.5V (absolute max 7V). Decouple with a 1µF ceramic capacitor to GND placed as close as possible to the pin."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. Return path for both input and output capacitors; route with wide, short copper trace back to this pin for best transient performance."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Chip enable, active high, CMOS logic level (VIL ≤ 0.4V shutdown, VIH ≥ 1.2V enabled at VIN = 3-5.5V). High impedance input (IEN ≈ 1µA typ.); must not be left floating. Tie to VIN to keep the regulator always on."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for board layout convenience."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output voltage (1.2V nominal for the M12 variant), ±2% accuracy at IOUT = 40mA. Delivers up to 300mA (current-limit typ. 450mA). Requires ≥1µF ceramic output capacitor (X5R/X7R) placed close to the pin for stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}