Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PJ78L15SQ

PJSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3

PJ78L15SQ from PJSEMI, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vo power_out Regulated output voltage pin. Provides a fixed 15V (typ) output, up to 100 mA. Requires a 0.1 µF output capacitor (C2) to GND for stability.
2 GND power_in Common ground reference for input and output. In the SOT-89 package this pin is also the large tab providing the primary thermal path.
3 Vi power_in Unregulated input voltage pin, up to 35V absolute max. Requires at least VO + dropout (~1.7V) to regulate. A 0.33 µF input capacitor (C1) to GND is recommended for stability.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOT-89-3
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • PJ78L15SQ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TJ=25℃) VO 14.4 15 15.6 V TJ=25℃ 2
Output Voltage (IO=1mA to 40mA, VI=17.5V to 30V) VO 14.25 15 15.75 V IO=1mA to 40mA VI=17.5V to 30V 2
Output Voltage (IO=1mA to 70mA, VI=23V) VO 14.25 15 15.75 V IO=1mA to 70mA VI=23V 2
Line Regulation (VI=17.5V to 30V) △Vo 150 mV VI=17.5V to 30V TJ=25℃ 2
Line Regulation (VI=20V to 30V) △Vo 75 mV VI=20V to 30V TJ=25℃ 2
Load Regulation (IO=1mA to 100mA) △VO 150 mV IO=1mA to 100 mA, TJ=25℃ 2
Load Regulation (IO=1mA to 70mA) △VO 150 mV IO=1mA to 70 mA, TJ=25℃ 2
Ripple Rejection RR 34 dB VI=18.5V to 28.5V, TJ=25℃ f=120Hz 2
Output Noise Voltage VN 90 μV f=10Hz~100KHz 2
Dropout Voltage VD 1.7 V TJ=25℃ 2
Quiescent Current IQ 6.5 mA TJ=25℃ 2
Quiescent Current Change (VI=20V to 30V) △IQ 1.5 mA VI=20V to 30V 2
Quiescent Current Change (IO=1mA to 40mA) △IQ 0.1 mA IO=1mA to 40mA 2
Input Voltage VI 35 V 1
Output Current IO 100 mA 1
Junction Temperature TJ 150 ℃ 1
Power Dissipation PD 500 mW 1
Storage Temperature Range TSTG -55 150 ℃ 1
Operating Temperature Range TOPR -40 125 ℃ 1

CAD (KiCad official)

  • Symbol: PJ78L15SQ
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: pj78l15sq-etched.step / pj78l15sq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj78l15sq.step / pj78l15sq.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pj78l15sq.step 57 KB You want the bare part, or you mark your own boards.
pj78l15sq-etched.step 1.4 MB You want the part with PJ78L15SQ already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 358 faces against 42 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (4 pp, sha256 798fc61f336b63dc, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF