main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pj7805te: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STEP) · Ray
viewers pj7805te: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
pj7805te-etched.fit.json pj7805te: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pj7805te-etched.glb pj7805te: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STEP) · Ray
pj7805te-etched.step pj7805te: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STEP) · Ray
pj7805te-hero.glb Publish 0.2.1 · Ray
pj7805te-hero.overlay.json Publish 0.2.1 · Ray
pj7805te.glb Publish 0.1.0 · Ray
pj7805te.kicad_mod Publish 0.1.0 · Ray
pj7805te.kicad_sym Publish 0.1.0 · Ray
pj7805te.lbr Publish 0.1.0 · Ray
pj7805te.step Publish 0.1.0 · Ray
README.md pj7805te: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PJ7805TE

PJSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252

PJ7805TE from PJSEMI, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated positive input voltage. Absolute maximum 35V. Recommended input capacitor Ci = 0.33 µF for stability. For PJ7805TE, VI = 7.5V to 20V for regulation over full load range.
2 GND power_in Ground / common return. Also connected to the exposed tab of the TO-252 package (thermal pad shown in Typical Application Circuit on page 2).
3 VOUT power_out Regulated +5V output. Nominal 5.0V (min 4.75V, max 5.25V) over IO = 5 mA to 1 A, VI = 7.5V to 20V. Supports over 1.5A with adequate heat sinking. Recommended output capacitor Co = 0.1 µF.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package TO-252
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • PJ7805TE
  • PJ7806TE
  • PJ7808TE
  • PJ7809TE
  • PJ7810TE
  • PJ7812TE
  • PJ7815TE

CAD (KiCad official)

  • Symbol: PJ7805TE
  • Footprint: Package_TO_SOT_SMD:TO-252-2
  • 3D model: TO-252 (KiCad packages3D, STEP)
  • 3D model files: pj7805te-etched.step / pj7805te-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj7805te.step / pj7805te.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pj7805te.step 119 KB You want the bare part, or you mark your own boards.
pj7805te-etched.step 1.5 MB You want the part with PJ7805TE already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 397 faces against 83 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (11 pp, sha256 6a3b2f9a1b2fc9fb, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF