main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pj71k50sc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pj71k50sc: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
pj71k50sc-etched.fit.json pj71k50sc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pj71k50sc-etched.glb pj71k50sc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pj71k50sc-etched.step pj71k50sc: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pj71k50sc-hero.glb pj71k50sc: hero from the plain model · Ray
pj71k50sc-hero.overlay.json pj71k50sc: hero from the plain model · Ray
pj71k50sc.glb Publish 0.1.0 · Ray
pj71k50sc.kicad_mod Publish 0.1.0 · Ray
pj71k50sc.kicad_sym Publish 0.1.0 · Ray
pj71k50sc.lbr Publish 0.1.0 · Ray
pj71k50sc.step Publish 0.1.0 · Ray
README.md pj71k50sc: specified limits as data (metadata.characteristics, 12 rows from the datasheet) · Ray

PJ71K50SC

PJSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23

PJ71K50SC from PJSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the regulator. Connect to system ground / common return.
2 VOUT power_out Regulated 5.0V output (±5%). Delivers up to 20mA (30mA typ.). A 10uF output capacitor to GND is recommended for stability.
3 VIN power_in Unregulated supply input. Operating range up to 24V (absolute max 28V). For 5.0V output, VIN must be at least ~6V (dropout ~100mV at 1mA). A 10uF input capacitor to GND is recommended.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • PJ71K50SC

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (PJ71K50SC, 5.0V) VOUT 4.75 5 5.25 V 7V IOUT=10mA 3
Load Regulation 60 100 mV 7V 1mA≤IOUT≤30mA 3
Voltage Drop VD 100 mV IOUT=1mA 3
Current Consumption ISS 5 9 uA 7V No load 3
Line Regulation △VOUT/△VIN×VOUT 0.2 %/V 6V≤VIN≤24V IOUT=1mA 3
Input Voltage VIN 24 V 3
Temperature Coefficient of Output Voltage △VOUT/△Ta -0.75 0.75 mV/℃ 7V IOUT=10mA 0℃<Ta<70℃ 3
Output Current IOUT 20 30 mA 7V 3
Supply Voltage (absolute maximum) VIN -0.3 28 V 2
Power Dissipation PD 200 mW 2
Operating Ambient Temperature TOPR -40 85 °C 2
Storage Temperature TSTG -65 125 °C 2

CAD (KiCad official)

  • Symbol: PJ71K50SC
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: pj71k50sc-etched.step / pj71k50sc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj71k50sc.step / pj71k50sc.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pj71k50sc.step 59 KB You want the bare part, or you mark your own boards.
pj71k50sc-etched.step 1.6 MB You want the part with PJ71K50SC already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 386 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (7 pp, sha256 112f003d9dfd0957, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF