main
Ray
Publish 0.1.0
c14446a
PJ6206AL33SA
PJSEMI · Linear Voltage Regulators (LDO) · SOT-23
PJ6206AL33SA from PJSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the regulator, connected to Vss in the block diagram. |
| 2 | VOUT | power_out | Regulated output voltage pin (3.3V for the 33 option), rated up to 300mA output current with foldback current limiting. |
| 3 | VIN | power_in | Supply input pin, with a maximum input voltage of 8V in the electrical characteristics (absolute maximum -0.3 to +6V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOT-23 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT=30mA | 3 | |
| Dropout Voltage | VDROP | 570 | mV | IOUT=100mA,VOUT≤1.5V | 3 | ||
| Dropout Voltage | VDROP | 290 | mV | IOUT=100mA (VOUT=3.3V, from features highlight) | 1 | ||
| Quiescent Current | IQ | 6 | µA | IOUT=0mA | 3 | ||
| Line Regulation | ΔVLINE | 0.2 | %/V | VIN=VOUT+1 to 8V, IOUT=40mA | 3 | ||
| Load Regulation | ΔVLOAD | 30 | mV | 1mA<IOUT<80mA | 3 | ||
| Output Voltage Temperature Coefficient | TCVOUT | -100 | 100 | ppm/℃ | IOUT=30mA, TA=0~70℃ | 3 | |
| Power Supply Rejection Ratio | PSRR | -70 | dB | f=1KHz, Iout=100mA | 3 | ||
| Output Noise | ENO | 160 | µVRMS | BW=10Hz~100KHz | 3 | ||
| Input Voltage | VIN | 8 | V | 3 | |||
| Input Voltage | VIN | -0.3 | 6 | V | 2 | ||
| Output Current | IOUT | 300 | mA | 2 | |||
| Output Voltage | VOUT | -0.3 | V | Upper limit printed as VIN+0.3 V | 2 | ||
| Operating Temperature Range | Topr | 0 | 70 | ℃ | 2 | ||
| Storage Temperature Range | Tstg | -55 | 125 | ℃ | 2 | ||
| Power Dissipation | 200 | mW | SOT-23 package | 2 |
CAD (KiCad official)
- Symbol:
PJ6206AL33SA - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
pj6206al33sa-etched.step/pj6206al33sa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pj6206al33sa.step/pj6206al33sa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PJSEMI datasheet (7 pp, sha256
6b3093d35eb5c617, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PJ6206AL33SA
**PJSEMI** · Linear Voltage Regulators (LDO) · SOT-23
PJ6206AL33SA from PJSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the regulator, connected to Vss in the block diagram. |
| 2 | VOUT | power_out | Regulated output voltage pin (3.3V for the 33 option), rated up to 300mA output current with foldback current limiting. |
| 3 | VIN | power_in | Supply input pin, with a maximum input voltage of 8V in the electrical characteristics (absolute maximum -0.3 to +6V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOT-23 |
| Category | Power Management ICs |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | | 2 | % | IOUT=30mA | 3 |
| Dropout Voltage | VDROP | | | 570 | mV | IOUT=100mA,VOUT≤1.5V | 3 |
| Dropout Voltage | VDROP | | 290 | | mV | IOUT=100mA (VOUT=3.3V, from features highlight) | 1 |
| Quiescent Current | IQ | | 6 | | µA | IOUT=0mA | 3 |
| Line Regulation | ΔVLINE | | 0.2 | | %/V | VIN=VOUT+1 to 8V, IOUT=40mA | 3 |
| Load Regulation | ΔVLOAD | | 30 | | mV | 1mA<IOUT<80mA | 3 |
| Output Voltage Temperature Coefficient | TCVOUT | -100 | | 100 | ppm/℃ | IOUT=30mA, TA=0~70℃ | 3 |
| Power Supply Rejection Ratio | PSRR | | -70 | | dB | f=1KHz, Iout=100mA | 3 |
| Output Noise | ENO | | 160 | | µVRMS | BW=10Hz~100KHz | 3 |
| Input Voltage | VIN | | | 8 | V | | 3 |
| Input Voltage | VIN | -0.3 | | 6 | V | | 2 |
| Output Current | IOUT | | | 300 | mA | | 2 |
| Output Voltage | VOUT | -0.3 | | | V | Upper limit printed as VIN+0.3 V | 2 |
| Operating Temperature Range | Topr | 0 | | 70 | ℃ | | 2 |
| Storage Temperature Range | Tstg | -55 | | 125 | ℃ | | 2 |
| Power Dissipation | | | | 200 | mW | SOT-23 package | 2 |
## CAD (KiCad official)
- Symbol: `PJ6206AL33SA`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `pj6206al33sa-etched.step` / `pj6206al33sa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pj6206al33sa.step` / `pj6206al33sa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PJSEMI datasheet](docs/pj6206al33sa-datasheet.pdf) (7 pp, sha256 `6b3093d35eb5c617`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pj6206al33sa-datasheet.pdf)