main
Ray
Publish 0.1.2
e059f46
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160
{
"slug": "pj4055a20sg",
"version": "0.1.2",
"type": "component",
"description": "PJSEMI Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"pj4055a20sg"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pj4055a20sg.kicad_sym",
"pj4055a20sg.kicad_mod",
"pj4055a20sg.glb",
"pj4055a20sg.step",
"pj4055a20sg.lbr",
"docs/hero.png",
"docs/pj4055a20sg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pj4055a20sg-etched.step",
"pj4055a20sg-etched.glb",
"pj4055a20sg-hero.glb",
"pj4055a20sg-hero.overlay.json"
],
"component": {
"mpn": "PJ4055A20SG",
"manufacturer": "PJSEMI",
"package": "SOT-23-6",
"pin_count": 6,
"category": "Battery Management",
"parts": {
"symbol": "pj4055a20sg.kicad_sym",
"footprint": "pj4055a20sg.kicad_mod",
"model_3d": "pj4055a20sg-hero.glb",
"model_3d_plain": "pj4055a20sg.glb",
"model_3d_step": "pj4055a20sg-etched.step",
"model_3d_step_plain": "pj4055a20sg.step",
"lbr": "pj4055a20sg.lbr"
},
"pins": [
{
"number": "1",
"name": "CHRG",
"type": "output",
"description": "Open-drain charge status output. Strong pull-down (bright) when a charge cycle is in progress; high-impedance when charge complete. Flashes if no battery is present. Weak pull-down current ICHRG ≈ 3 mA. Typically drives an LED with a 1 kΩ series resistor to VCC."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground pin. Also serves as the primary thermal path from the die/lead-frame to the PC board copper heatsink for thermal regulation."
},
{
"number": "3",
"name": "BAT",
"type": "power_out",
"description": "Charging current output to the Li-Ion battery. Regulated float voltage 4.20V (A20 variant, ±0.6%). Delivers up to 600 mA (programmed via PROG). Recharge threshold ~4.1V; trickle-charge threshold 2.9V. Absolute maximum -4.5 to +5.5 V. Requires a 1 µF decoupling capacitor to GND."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Positive input supply voltage. Operating range 4.5 V to 6.2 V (typ. 5 V, USB-compatible); 6.2 V input OVP; absolute maximum 12 V. Input supply current ICC ≈ 150 µA. Requires a 1 µF decoupling capacitor to GND."
},
{
"number": "5",
"name": "STANDBY",
"type": "output",
"description": "Open-drain charge-complete status output. High-impedance during charging; changes to strong pull-down state once the charge cycle terminates (battery full). Typically drives an LED with a 1 kΩ series resistor to VCC."
},
{
"number": "6",
"name": "PROG",
"type": "bidirectional",
"description": "Charge-current program, charge-current monitor, and shutdown pin. Connect a resistor RPROG from PROG to GND; charge current IBAT = (VPROG/RPROG)×1000, where VPROG ≈ 1.0 V. Example: RPROG = 2 kΩ → 500 mA; RPROG = 10 kΩ → 100 mA. Charge terminates when VPROG falls below 100 mV (C/10). Absolute max VPROG -0.3 to 8.5 V. Floating/open the pin to shut down."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C41413543",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:13:46Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "pj4055a20sg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pj4055a20sg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "73a252de1e8d9510d8ef4f7369c8b5c048ea8925e32040cc3325a1652c58ad22",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}