component
PIC32MZ2064DAG176-I/2J
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), LQFP-176(20x20). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
e0c1d7d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251
{
"slug": "pic32mz2064dag176-i-2j",
"version": "0.1.0",
"type": "component",
"description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), LQFP-176(20x20). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"pic32mz2064dag176-i",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic32mz2064dag176-i-2j.kicad_sym",
"pic32mz2064dag176-i-2j.kicad_mod",
"pic32mz2064dag176-i-2j.glb",
"pic32mz2064dag176-i-2j.step",
"pic32mz2064dag176-i-2j.lbr",
"docs/hero.png",
"docs/pic32mz2064dag176-i-2j-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic32mz2064dag176-i-2j-hero.glb",
"pic32mz2064dag176-i-2j-hero.overlay.json"
],
"component": {
"mpn": "PIC32MZ2064DAG176-I/2J",
"manufacturer": "Microchip Tech",
"package": "LQFP-176(20x20)",
"pin_count": 176,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MZ-Graphics-DA-Family-Data-Sheet-DS60001361J.pdf",
"parts": {
"symbol": "pic32mz2064dag176-i-2j.kicad_sym",
"footprint": "pic32mz2064dag176-i-2j.kicad_mod",
"model_3d": "pic32mz2064dag176-i-2j-hero.glb",
"model_3d_plain": "pic32mz2064dag176-i-2j.glb",
"model_3d_step": "pic32mz2064dag176-i-2j-etched.step",
"model_3d_step_plain": "pic32mz2064dag176-i-2j.step",
"lbr": "pic32mz2064dag176-i-2j.lbr"
},
"distributor_links": {
"lcsc": "C640655",
"digikey": "PIC32MZ2064DAG176-I/2J-ND",
"mouser": "579-MZ2064DAG176I2J"
},
"distributor_check": {
"checked_at": "2026-11-13T14:02:05Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "PIC32MZ2064DAG176-I/2J-ND",
"status": "found"
},
"mouser": {
"pn": "579-MZ2064DAG176I2J",
"status": "found"
},
"matched_as": "PIC32MZ2064DAG176-I/2J"
},
"pins": [
{
"number": "1",
"name": "VREF-/CVREF-/AN27/RA9",
"type": "power_in",
"description": "Analog voltage reference low input (VREF-) for the ADC, also CVREF- comparator reference input, AN27 and PORTA bit RA9."
},
{
"number": "2",
"name": "VREF+/CVREF+/AN28/RA10",
"type": "power_in",
"description": "Analog voltage reference high input (VREF+) for the ADC, also CVREF+ comparator reference input, AN28 and PORTA bit RA10."
},
{
"number": "3",
"name": "AVDD",
"type": "power_in",
"description": "Positive supply for analog modules; this pin must be connected at all times."
},
{
"number": "4",
"name": "AVDD",
"type": "power_in",
"description": "Positive supply for analog modules; this pin must be connected at all times."
},
{
"number": "5",
"name": "AVSS",
"type": "power_in",
"description": "Ground reference for analog modules; this pin must be connected at all times."
},
{
"number": "6",
"name": "AVSS",
"type": "power_in",
"description": "Ground reference for analog modules; this pin must be connected at all times."
},
{
"number": "7",
"name": "AN3/C2INA/RPB15/OCFB/RB15",
"type": "input",
"description": "ADC analog input AN3 that is also Comparator 2 positive input C2INA, shared with PORTB bit RB15, remappable RPB15 and Output Compare fault B input OCFB."
},
{
"number": "8",
"name": "AN8/RPB3/RB3",
"type": "input",
"description": "ADC analog input AN8 shared with PORTB bit RB3 and remappable pin RPB3."
},
{
"number": "9",
"name": "AN48/CTPLS/RB13",
"type": "input",
"description": "ADC analog input AN48 shared with PORTB bit RB13 and CTMU output pulse CTPLS."
},
{
"number": "10",
"name": "EBID10/AN4/RPB8/PMD10/RB8",
"type": "bidirectional",
"description": "External Bus Interface data bit 10 shared with ADC input AN4, PORTB bit RB8, remappable RPB8 and PMP data bit PMD10."
},
{
"number": "11",
"name": "PGEC1/AN9/RPB1/CTED1/RB1",
"type": "input",
"description": "ICSP/debug Channel 1 clock input PGEC1 shared with ADC input AN9, PORTB bit RB1 and CTMU edge input CTED1; no pull-ups, series diodes or bypass capacitors are allowed on it."
},
{
"number": "12",
"name": "AN49/RB11",
"type": "input",
"description": "ADC analog input AN49 shared with PORTB bit RB11."
},
{
"number": "13",
"name": "PGEC2/RPB6/RB6",
"type": "input",
"description": "ICSP/debug Channel 2 clock input PGEC2 shared with PORTB bit RB6 and remappable RPB6; no pull-ups, series diodes or bypass capacitors are allowed on it."
},
{
"number": "14",
"name": "EBID12/AN10/RPC2/PMD12/RC2",
"type": "bidirectional",
"description": "External Bus Interface data bit 12 shared with ADC input AN10, PORTC bit RC2, remappable RPC2 and PMP data bit PMD12."
},
{
"number": "15",
"name": "EBIWE/AN34/RPC3/PMWR/RC3",
"type": "output",
"description": "External Bus Interface write enable EBIWE shared with ADC input AN34, PORTC bit RC3, remappable RPC3 and PMP write strobe PMWR."
},
{
"number": "16",
"name": "EBIOE/AN19/RPC4/PMRD/RC4",
"type": "output",
"description": "External Bus Interface output enable EBIOE shared with ADC input AN19, PORTC bit RC4, remappable RPC4 and PMP read strobe PMRD."
},
{
"number": "17",
"name": "EBID5/AN12/RPC1/PMD5/RC1",
"type": "bidirectional",
"description": "External Bus Interface data bit 5 shared with ADC input AN12, PORTC bit RC1, remappable RPC1 and PMP data bit PMD5."
},
{
"number": "18",
"name": "VDDCORE",
"type": "power_in",
"description": "1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times."
},
{
"number": "19",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "20",
"name": "No Connect",
"type": "unconnected",
"description": "No connect pin on the 176-pin LQFP package."
},
{
"number": "21",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "22",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "23",
"name": "EBID6/AN16/PMD6/RE6",
"type": "bidirectional",
"description": "External Bus Interface data bit 6 shared with ADC input AN16, PORTE bit RE6 and PMP data bit PMD6."
},
{
"number": "24",
"name": "EBID7/AN15/PMD7/RE7",
"type": "bidirectional",
"description": "External Bus Interface data bit 7 shared with ADC input AN15, PORTE bit RE7 and PMP data bit PMD7."
},
{
"number": "25",
"name": "AN25/RPE8/RE8",
"type": "input",
"description": "ADC analog input AN25 shared with PORTE bit RE8 and remappable pin RPE8."
},
{
"number": "26",
"name": "AN26/RPE9/RE9",
"type": "input",
"description": "ADC analog input AN26 shared with PORTE bit RE9 and remappable pin RPE9."
},
{
"number": "27",
"name": "TDO/AN31/RPF12/RF12",
"type": "output",
"description": "JTAG test data output TDO shared with ADC input AN31, remappable RPF12 and PORTF bit RF12."
},
{
"number": "28",
"name": "TDI/AN17/SCK5/RF13",
"type": "input",
"description": "JTAG test data input TDI shared with ADC input AN17, SPI5 clock SCK5 and PORTF bit RF13 (Schmitt trigger input)."
},
{
"number": "29",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "30",
"name": "AN14/C1IND/SCK2/RG6",
"type": "input",
"description": "ADC analog input AN14 shared with Comparator 1 input C1IND, SPI2 clock SCK2 and PORTG bit RG6."
},
{
"number": "31",
"name": "AN13/C1INC/RPG7/SDA4/RG7",
"type": "input",
"description": "ADC analog input AN13 shared with Comparator 1 input C1INC, remappable RPG7, I2C4 data SDA4 and PORTG bit RG7."
},
{
"number": "32",
"name": "AN30/C2IND/RPG8/SCL4/RG8",
"type": "input",
"description": "ADC analog input AN30 shared with Comparator 2 input C2IND, remappable RPG8, I2C4 clock SCL4 and PORTG bit RG8."
},
{
"number": "33",
"name": "EBIA2/AN23/C2INC/RPG9/PMA2/RG9",
"type": "output",
"description": "External Bus Interface address bit 2 shared with ADC input AN23, Comparator 2 input C2INC, remappable RPG9, PMP address PMA2 and PORTG bit RG9."
},
{
"number": "34",
"name": "AN21/RG15",
"type": "input",
"description": "ADC analog input AN21 shared with PORTG bit RG15."
},
{
"number": "35",
"name": "AN20/RH4",
"type": "input",
"description": "ADC analog input AN20 shared with PORTH bit RH4."
},
{
"number": "36",
"name": "EBID1/AN39/PMD1/RE1",
"type": "bidirectional",
"description": "External Bus Interface data bit 1 shared with ADC input AN39, PORTE bit RE1 and PMP data bit PMD1."
},
{
"number": "37",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "38",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "39",
"name": "VDDCORE",
"type": "power_in",
"description": "1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times."
},
{
"number": "40",
"name": "EBID0/PMD0/RE0",
"type": "bidirectional",
"description": "External Bus Interface data bit 0 shared with PMP data bit PMD0 and PORTE bit RE0."
},
{
"number": "41",
"name": "RPF2/SDA3/RF2",
"type": "bidirectional",
"description": "Remappable pin RPF2 shared with I2C3 data SDA3 and PORTF bit RF2."
},
{
"number": "42",
"name": "INT0/RH14",
"type": "input",
"description": "External interrupt 0 (Schmitt trigger input) shared with PORTH bit RH14."
},
{
"number": "43",
"name": "EBID4/AN18/PMD4/RE4",
"type": "bidirectional",
"description": "External Bus Interface data bit 4 shared with ADC input AN18, PORTE bit RE4 and PMP data bit PMD4."
},
{
"number": "44",
"name": "No Connect",
"type": "unconnected",
"description": "No connect pin on the 176-pin LQFP package."
},
{
"number": "45",
"name": "VBUS",
"type": "power_in",
"description": "USB bus power monitor input (analog) for the USB OTG module."
},
{
"number": "46",
"name": "VUSB3V3",
"type": "power_in",
"description": "USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS."
},
{
"number": "47",
"name": "VUSB3V3",
"type": "power_in",
"description": "USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS."
},
{
"number": "48",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "49",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "50",
"name": "D-",
"type": "bidirectional",
"description": "USB D- differential data line (analog)."
},
{
"number": "51",
"name": "D+",
"type": "bidirectional",
"description": "USB D+ differential data line (analog)."
},
{
"number": "52",
"name": "USBID",
"type": "input",
"description": "USB OTG ID detect input (Schmitt trigger)."
},
{
"number": "53",
"name": "TMS/SDCD/RA0",
"type": "input",
"description": "JTAG test mode select TMS (Schmitt trigger input) shared with SD card detect SDCD and PORTA bit RA0."
},
{
"number": "54",
"name": "TRCLK/SDCK/SQICLK/RA6",
"type": "output",
"description": "Trace clock TRCLK shared with SD clock SDCK, SQI clock SQICLK and PORTA bit RA6."
},
{
"number": "55",
"name": "TRD3/SDDATA3/SQID3/RA7",
"type": "output",
"description": "Trace data bit 3 TRD3 shared with SD data SDDATA3, SQI data SQID3 and PORTA bit RA7."
},
{
"number": "56",
"name": "TRD1/SDDATA1/SQID1/RG12",
"type": "output",
"description": "Trace data bit 1 TRD1 shared with SD data SDDATA1, SQI data SQID1 and PORTG bit RG12."
},
{
"number": "57",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "58",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "59",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "60",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "61",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "62",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "63",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "64",
"name": "TRD0/SDDATA0/SQID0/RG13",
"type": "output",
"description": "Trace data bit 0 TRD0 shared with SD data SDDATA0, SQI data SQID0 and PORTG bit RG13."
},
{
"number": "65",
"name": "TRD2/SDDATA2/SQID2/RG14",
"type": "output",
"description": "Trace data bit 2 TRD2 shared with SD data SDDATA2, SQI data SQID2 and PORTG bit RG14."
},
{
"number": "66",
"name": "DDRVREF",
"type": "power_in",
"description": "1.8V voltage reference to the DDR2 SDRAM memory; this pin is a no connect in devices without DDR."
},
{
"number": "67",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "68",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "69",
"name": "EBIA6/RPE5/PMA6/RE5",
"type": "output",
"description": "External Bus Interface address bit 6 shared with remappable RPE5, PMP address PMA6 and PORTE bit RE5."
},
{
"number": "70",
"name": "SDCMD/SQICS0/RPD4/RD4",
"type": "output",
"description": "SD command SDCMD shared with SQI chip select SQICS0, remappable RPD4 and PORTD bit RD4."
},
{
"number": "71",
"name": "SQICS1/RPD5/RD5",
"type": "output",
"description": "SQI chip select SQICS1 shared with remappable RPD5 and PORTD bit RD5."
},
{
"number": "72",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "73",
"name": "SCK1/RD1",
"type": "bidirectional",
"description": "SPI1 synchronous serial clock input/output shared with PORTD bit RD1."
},
{
"number": "74",
"name": "GD10/EBIA14/RPD2/PMA14/PMCS1/RD2",
"type": "output",
"description": "Graphics display data bit 10 shared with EBI address bit 14, remappable RPD2, PMP address PMA14, PMP chip select PMCS1 and PORTD bit RD2."
},
{
"number": "75",
"name": "GD11/EBIA15/RPD3/PMA15/PMCS2/RD3",
"type": "output",
"description": "Graphics display data bit 11 shared with EBI address bit 15, remappable RPD3, PMP address PMA15, PMP chip select PMCS2 and PORTD bit RD3."
},
{
"number": "76",
"name": "GD2/EBID15/RPD9/PMD15/RD9",
"type": "output",
"description": "Graphics display data bit 2 shared with EBI data bit 15, remappable RPD9, PMP data bit PMD15 and PORTD bit RD9."
},
{
"number": "77",
"name": "SCK4/RD10",
"type": "bidirectional",
"description": "SPI4 synchronous serial clock input/output shared with PORTD bit RD10."
},
{
"number": "78",
"name": "VDDR1V8",
"type": "power_in",
"description": "Positive supply for the DDR2 SDRAM memory; must be tied to Vss through a 20k resistor in devices without DDR."
},
{
"number": "79",
"name": "RTCC/RPD0/RD0",
"type": "output",
"description": "Real-Time Clock alarm/seconds output RTCC (not available during VBAT operation) shared with remappable RPD0 and PORTD bit RD0."
},
{
"number": "80",
"name": "GD7/EBIA12/RPD12/PMA12/RD12",
"type": "output",
"description": "Graphics display data bit 7 shared with EBI address bit 12, remappable RPD12, PMP address PMA12 and PORTD bit RD12."
},
{
"number": "81",
"name": "GD22/EBIA13/PMA13/RD13",
"type": "output",
"description": "Graphics display data bit 22 shared with EBI address bit 13, PMP address PMA13 and PORTD bit RD13."
},
{
"number": "82",
"name": "RPF8/SCL3/RF8",
"type": "bidirectional",
"description": "Remappable pin RPF8 shared with I2C3 clock SCL3 and PORTF bit RF8."
},
{
"number": "83",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "84",
"name": "VDDCORE",
"type": "power_in",
"description": "1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times."
},
{
"number": "85",
"name": "MCLR",
"type": "input",
"description": "Master Clear input; an active-low pull of this pin generates a device Reset."
},
{
"number": "86",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "87",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "88",
"name": "No Connect",
"type": "unconnected",
"description": "No connect pin on the 176-pin LQFP package."
},
{
"number": "89",
"name": "GD16/EBID8/RPF5/SCL5/PMD8/RF5",
"type": "output",
"description": "Graphics display data bit 16 shared with EBI data bit 8, remappable RPF5, I2C5 clock SCL5, PMP data bit PMD8 and PORTF bit RF5."
},
{
"number": "90",
"name": "GD5/EBIA10/RPF1/PMA10/RF1",
"type": "output",
"description": "Graphics display data bit 5 shared with EBI address bit 10, remappable RPF1, PMP address PMA10 and PORTF bit RF1."
},
{
"number": "91",
"name": "GD6/EBIA11/RPF0/PMA11/RF0",
"type": "output",
"description": "Graphics display data bit 6 shared with EBI address bit 11, remappable RPF0, PMP address PMA11 and PORTF bit RF0."
},
{
"number": "92",
"name": "GD21/EBIA23/RH15",
"type": "output",
"description": "Graphics display data bit 21 shared with EBI address bit 23 and PORTH bit RH15."
},
{
"number": "93",
"name": "ERXERR/RPF3/RF3",
"type": "input",
"description": "Ethernet receive error input ERXERR shared with remappable RPF3 and PORTF bit RF3."
},
{
"number": "94",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "95",
"name": "GD4/EBIA9/RPG1/PMA9/RG1",
"type": "output",
"description": "Graphics display data bit 4 shared with EBI address bit 9, remappable RPG1, PMP address PMA9 and PORTG bit RG1."
},
{
"number": "96",
"name": "GD3/EBIA8/RPG0/PMA8/RG0",
"type": "output",
"description": "Graphics display data bit 3 shared with EBI address bit 8, remappable RPG0, PMP address PMA8 and PORTG bit RG0."
},
{
"number": "97",
"name": "GD17/EBID9/RPF4/SDA5/PMD9/RF4",
"type": "output",
"description": "Graphics display data bit 17 shared with EBI data bit 9, remappable RPF4, I2C5 data SDA5, PMP data bit PMD9 and PORTF bit RF4."
},
{
"number": "98",
"name": "EBID3/RPE3/PMD3/RE3",
"type": "bidirectional",
"description": "External Bus Interface data bit 3 shared with remappable RPE3, PMP data bit PMD3 and PORTE bit RE3."
},
{
"number": "99",
"name": "EBID2/PMD2/RE2",
"type": "bidirectional",
"description": "External Bus Interface data bit 2 shared with PMP data bit PMD2 and PORTE bit RE2."
},
{
"number": "100",
"name": "ERXD1/RH5",
"type": "input",
"description": "Ethernet receive data bit 1 (Schmitt trigger input) shared with PORTH bit RH5."
},
{
"number": "101",
"name": "ERXD2/RH6",
"type": "input",
"description": "Ethernet receive data bit 2 (Schmitt trigger input) shared with PORTH bit RH6."
},
{
"number": "102",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "103",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "104",
"name": "ERXDV/ECRSDV/RH13",
"type": "input",
"description": "Ethernet receive data valid (MII) or carrier sense data valid (RMII) input shared with PORTH bit RH13."
},
{
"number": "105",
"name": "ECRS/RH12",
"type": "input",
"description": "Ethernet carrier sense input (Schmitt trigger) shared with PORTH bit RH12."
},
{
"number": "106",
"name": "ECOL/RH10",
"type": "input",
"description": "Ethernet collision detect input (Schmitt trigger) shared with PORTH bit RH10."
},
{
"number": "107",
"name": "ERXD3/RH9",
"type": "input",
"description": "Ethernet receive data bit 3 (Schmitt trigger input) shared with PORTH bit RH9."
},
{
"number": "108",
"name": "ERXD0/RH8",
"type": "input",
"description": "Ethernet receive data bit 0 (Schmitt trigger input) shared with PORTH bit RH8."
},
{
"number": "109",
"name": "ETXD3/RH1",
"type": "output",
"description": "Ethernet transmit data bit 3 shared with PORTH bit RH1."
},
{
"number": "110",
"name": "ETXD2/RH0",
"type": "output",
"description": "Ethernet transmit data bit 2 shared with PORTH bit RH0."
},
{
"number": "111",
"name": "ERXCLK/EREFCLK/RJ11",
"type": "input",
"description": "Ethernet receive clock (MII) or reference clock (RMII) input shared with PORTJ bit RJ11."
},
{
"number": "112",
"name": "ETXD1/RJ9",
"type": "output",
"description": "Ethernet transmit data bit 1 shared with PORTJ bit RJ9."
},
{
"number": "113",
"name": "ETXD0/RJ8",
"type": "output",
"description": "Ethernet transmit data bit 0 shared with PORTJ bit RJ8."
},
{
"number": "114",
"name": "EMDIO/RJ1",
"type": "bidirectional",
"description": "Ethernet management data I/O shared with PORTJ bit RJ1."
},
{
"number": "115",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "116",
"name": "VDDCORE",
"type": "power_in",
"description": "1.8V positive supply for core logic (1.7V to 1.9V); this pin must be connected at all times."
},
{
"number": "117",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "118",
"name": "ETXERR/RJ0",
"type": "output",
"description": "Ethernet transmit error output shared with PORTJ bit RJ0."
},
{
"number": "119",
"name": "EMDC/RPD11/RD11",
"type": "output",
"description": "Ethernet management data clock output shared with remappable RPD11 and PORTD bit RD11."
},
{
"number": "120",
"name": "ETXCLK/RPD7/RD7",
"type": "input",
"description": "Ethernet transmit clock input (Schmitt trigger) shared with remappable RPD7 and PORTD bit RD7."
},
{
"number": "121",
"name": "ETXEN/RPD6/RD6",
"type": "output",
"description": "Ethernet transmit enable output shared with remappable RPD6 and PORTD bit RD6."
},
{
"number": "122",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "123",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "124",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "125",
"name": "RPA15/SDA1/RA15",
"type": "bidirectional",
"description": "Remappable pin RPA15 shared with I2C1 data SDA1 and PORTA bit RA15."
},
{
"number": "126",
"name": "RPA14/SCL1/RA14",
"type": "bidirectional",
"description": "Remappable pin RPA14 shared with I2C1 clock SCL1 and PORTA bit RA14."
},
{
"number": "127",
"name": "GD1/EBID14/PMD14/RA4",
"type": "output",
"description": "Graphics display data bit 1 shared with EBI data bit 14, PMP data bit PMD14 and PORTA bit RA4."
},
{
"number": "128",
"name": "EBIRDY1/SDA2/RA3",
"type": "input",
"description": "EBI ready input EBIRDY1 shared with I2C2 data SDA2 and PORTA bit RA3."
},
{
"number": "129",
"name": "SCL2/RA2",
"type": "bidirectional",
"description": "I2C2 clock SCL2 shared with PORTA bit RA2."
},
{
"number": "130",
"name": "GD19/EBIA21/RK7",
"type": "output",
"description": "Graphics display data bit 19 shared with EBI address bit 21 and PORTK bit RK7."
},
{
"number": "131",
"name": "GD15/EBIA20/RK6",
"type": "output",
"description": "Graphics display data bit 15 shared with EBI address bit 20 and PORTK bit RK6."
},
{
"number": "132",
"name": "GD14/EBIA19/RK5",
"type": "output",
"description": "Graphics display data bit 14 shared with EBI address bit 19 and PORTK bit RK5."
},
{
"number": "133",
"name": "GD13/EBIA18/RK4",
"type": "output",
"description": "Graphics display data bit 13 shared with EBI address bit 18 and PORTK bit RK4."
},
{
"number": "134",
"name": "GD12/EBIA17/RK3",
"type": "output",
"description": "Graphics display data bit 12 shared with EBI address bit 17 and PORTK bit RK3."
},
{
"number": "135",
"name": "EBIA3/AN11/PMA3/RK2",
"type": "output",
"description": "External Bus Interface address bit 3 shared with ADC input AN11, PMP address PMA3 and PORTK bit RK2."
},
{
"number": "136",
"name": "EBIA1/AN38/PMA1/RK1",
"type": "output",
"description": "External Bus Interface address bit 1 shared with ADC input AN38, PMP address PMA1 and PORTK bit RK1."
},
{
"number": "137",
"name": "GD23/EBIA16/RK0",
"type": "output",
"description": "Graphics display data bit 23 shared with EBI address bit 16 and PORTK bit RK0."
},
{
"number": "138",
"name": "EBIRDY2/AN37/RH11",
"type": "input",
"description": "EBI ready input EBIRDY2 shared with ADC input AN37 and PORTH bit RH11."
},
{
"number": "139",
"name": "EBIA4/AN36/PMA4/RH7",
"type": "output",
"description": "External Bus Interface address bit 4 shared with ADC input AN36, PMP address PMA4 and PORTH bit RH7."
},
{
"number": "140",
"name": "AN35/RH3",
"type": "input",
"description": "ADC analog input AN35 shared with PORTH bit RH3."
},
{
"number": "141",
"name": "SDWP/EBIRP/RH2",
"type": "input",
"description": "SD write protect input SDWP shared with EBI flash reset output EBIRP and PORTH bit RH2."
},
{
"number": "142",
"name": "EBIA0/PMA0/RJ15",
"type": "output",
"description": "External Bus Interface address bit 0 shared with PMP address PMA0 and PORTJ bit RJ15."
},
{
"number": "143",
"name": "GD8/EBID11/PMD11/RJ14",
"type": "output",
"description": "Graphics display data bit 8 shared with EBI data bit 11, PMP data bit PMD11 and PORTJ bit RJ14."
},
{
"number": "144",
"name": "GD0/EBID13/PMD13/RJ13",
"type": "output",
"description": "Graphics display data bit 0 shared with EBI data bit 13, PMP data bit PMD13 and PORTJ bit RJ13."
},
{
"number": "145",
"name": "GD9/EBIBS0/RJ12",
"type": "output",
"description": "Graphics display data bit 9 shared with EBI byte select EBIBS0 and PORTJ bit RJ12."
},
{
"number": "146",
"name": "GD18/EBIBS1/RJ10",
"type": "output",
"description": "Graphics display data bit 18 shared with EBI byte select EBIBS1 and PORTJ bit RJ10."
},
{
"number": "147",
"name": "GEN/EBICS3/RJ7",
"type": "output",
"description": "Graphics display enable output GEN shared with EBI chip select EBICS3 and PORTJ bit RJ7."
},
{
"number": "148",
"name": "GCLK/EBICS2/RJ6",
"type": "output",
"description": "Graphics display pixel clock output GCLK shared with EBI chip select EBICS2 and PORTJ bit RJ6."
},
{
"number": "149",
"name": "HSYNC/EBICS1/RJ5",
"type": "output",
"description": "Graphics display horizontal sync output HSYNC shared with EBI chip select EBICS1 and PORTJ bit RJ5."
},
{
"number": "150",
"name": "VSYNC/EBICS0/RJ4",
"type": "output",
"description": "Graphics display vertical sync output VSYNC shared with EBI chip select EBICS0 and PORTJ bit RJ4."
},
{
"number": "151",
"name": "GD20/EBIA22/RJ3",
"type": "output",
"description": "Graphics display data bit 20 shared with EBI address bit 22 and PORTJ bit RJ3."
},
{
"number": "152",
"name": "EBIRDY3/AN32/RJ2",
"type": "input",
"description": "EBI ready input EBIRDY3 shared with ADC input AN32 and PORTJ bit RJ2."
},
{
"number": "153",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "154",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic, I/O pins and USB; this pin must be connected at all times."
},
{
"number": "155",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "156",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "157",
"name": "AN33/SCK6/RD15",
"type": "input",
"description": "ADC analog input AN33 shared with SPI6 clock SCK6 and PORTD bit RD15."
},
{
"number": "158",
"name": "AN22/RPD14/RD14",
"type": "input",
"description": "ADC analog input AN22 shared with remappable RPD14 and PORTD bit RD14."
},
{
"number": "159",
"name": "AN29/SCK3/RB14",
"type": "input",
"description": "ADC analog input AN29 shared with SPI3 clock SCK3 and PORTB bit RB14."
},
{
"number": "160",
"name": "TCK/AN24/RA1",
"type": "input",
"description": "JTAG test clock input TCK (Schmitt trigger) shared with ADC input AN24 and PORTA bit RA1."
},
{
"number": "161",
"name": "SOSCO/RPC14/T1CK/RC14",
"type": "output",
"description": "32.768 kHz secondary oscillator output SOSCO shared with Timer1 external clock T1CK and PORTC bit RC14; the RC14 function is input-only."
},
{
"number": "162",
"name": "SOSCI/RPC13/RC13",
"type": "input",
"description": "32.768 kHz secondary oscillator crystal input shared with PORTC bit RC13 (input-only function) and remappable RPC13."
},
{
"number": "163",
"name": "OSC2/CLKO/RC15",
"type": "output",
"description": "Primary oscillator crystal output OSC2 (also CLKO in RC and EC modes) shared with PORTC bit RC15."
},
{
"number": "164",
"name": "OSC1/CLKI/RC12",
"type": "input",
"description": "Primary oscillator crystal or external clock input OSC1 (Schmitt trigger in RC mode) shared with PORTC bit RC12."
},
{
"number": "165",
"name": "VDDIO",
"type": "power_in",
"description": "Positive supply for peripheral logic and I/O pins (2.2V to 3.6V); this pin must be connected at all times."
},
{
"number": "166",
"name": "VBAT",
"type": "power_in",
"description": "Positive supply for the battery-backed section; if VBAT mode is not used it is recommended to connect this pin to VDDIO."
},
{
"number": "167",
"name": "AN45/RPB5/RB5",
"type": "input",
"description": "ADC analog input AN45 shared with remappable RPB5 and PORTB bit RB5."
},
{
"number": "168",
"name": "AN5/RPB10/RB10",
"type": "input",
"description": "ADC analog input AN5 shared with remappable RPB10 and PORTB bit RB10 (CVREFOUT is not available on this pin in this device)."
},
{
"number": "169",
"name": "PGED1/AN0/RPB0/CTED2/RB0",
"type": "bidirectional",
"description": "ICSP/debug Channel 1 data I/O PGED1 shared with ADC input AN0, remappable RPB0, CTMU edge input CTED2 and PORTB bit RB0."
},
{
"number": "170",
"name": "PGED2/C1INA/AN46/RPB7/RB7",
"type": "bidirectional",
"description": "ICSP/debug Channel 2 data I/O PGED2 shared with Comparator 1 positive input C1INA, ADC input AN46, remappable RPB7 and PORTB bit RB7."
},
{
"number": "171",
"name": "AN6/RB12",
"type": "input",
"description": "ADC analog input AN6 shared with PORTB bit RB12."
},
{
"number": "172",
"name": "AN1/C2INB/RPB2/RB2",
"type": "input",
"description": "ADC analog input AN1 shared with Comparator 2 selectable negative input C2INB, remappable RPB2 and PORTB bit RB2."
},
{
"number": "173",
"name": "EBIA7/AN47/HLVDIN/RPB9/PMA7/RB9",
"type": "output",
"description": "External Bus Interface address bit 7 shared with ADC input AN47, HLVD input HLVDIN, remappable RPB9, PMP address PMA7 and PORTB bit RB9."
},
{
"number": "174",
"name": "EBIA5/AN7/PMA5/RA5",
"type": "output",
"description": "External Bus Interface address bit 5 shared with ADC input AN7, PMP address PMA5 and PORTA bit RA5."
},
{
"number": "175",
"name": "AN2/C1INB/RB4",
"type": "input",
"description": "ADC analog input AN2 shared with Comparator 1 selectable negative input C1INB and PORTB bit RB4."
},
{
"number": "176",
"name": "No Connect",
"type": "unconnected",
"description": "No connect pin on the 176-pin LQFP package."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN PIC32MZ2064DAG176 is a DAG variant with internal DDR2 (Table 2/3 and Table 1-22 list the DDR; The 5V-tolerant pins are shown by shading in Table 6 ('Shaded pins are 5V tolerant'), which the text; Pin types follow the primary (first-listed) function of each pin name in Tables 1-1 to 1-24, mapped ",
"1/176 pins cited to the wrong page (name found elsewhere): ['27:TDO/AN31/RPF12/RF12@p32']"
],
"pages_sent": 104,
"cost_usd": 0.7986,
"at": "2026-11-13T14:01:39"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MZ-Graphics-DA-Family-Data-Sheet-DS60001361J.pdf",
"pages": 832,
"sha256": "c0f74674e5c0fba7",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 176,
"described": 176,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pic32mz2064dag176-i-2j.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
22.0,
22.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "35c4fd389a15e78d2a8209527b8b38aad9cf1f8ad212058be6fef6981a181fc5",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pic32mz2064dag176-i-2j-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
22.0,
22.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d7f605a9f9e5b25957fd3bf89d7f9360d14a2ceeeb92b406158a8e851c763df1",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "LQFP-176 (2J), Microchip drawing C04-367A, 20x20x1.4 mm body with 7x7 mm exposed pad",
"source_page": 805,
"D": {
"nom_mm": 20.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 20.0,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 22.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.4,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "pic32mz2064dag176-i-2j.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}