main
Ray pic32mz2048efh100-250i-pt: renamed from pic32mz2048efh100-250i, the part it was built from (PIC32MZ2048EFH100-250I/PT);… b7a0e02

PIC32MZ2048EFH100-250I/PT

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)

PIC32MZ2048EFH100-250I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AN23/AERXERR/RG15 bidirectional PORTG I/O RG15 shared with analog input AN23 and alternate Ethernet receive error input AERXERR.
2 EBIA5/AN34/PMA5/RA5 bidirectional PORTA I/O RA5 shared with analog input AN34, EBI address bit 5 and PMP address bit 5.
3 EBID5/AN17/RPE5/PMD5/RE5 bidirectional PORTE I/O RE5 with analog input AN17, remappable pin RPE5, EBI data bit 5 and PMP data bit 5.
4 EBID6/AN16/PMD6/RE6 bidirectional PORTE I/O RE6 with analog input AN16, EBI data bit 6 and PMP data bit 6.
5 EBID7/AN15/PMD7/RE7 bidirectional PORTE I/O RE7 with analog input AN15, EBI data bit 7 and PMP data bit 7.
6 EBIA6/AN22/RPC1/PMA6/RC1 bidirectional PORTC I/O RC1 with analog input AN22, remappable pin RPC1, EBI address bit 6 and PMP address bit 6.
7 EBIA12/AN21/RPC2/PMA12/RC2 bidirectional PORTC I/O RC2 with analog input AN21, remappable pin RPC2, EBI address bit 12 and PMP address bit 12.
8 EBIWE/AN20/RPC3/PMWR/RC3 bidirectional PORTC I/O RC3 with analog input AN20, remappable pin RPC3, EBI write enable and PMP write strobe.
9 EBIOE/AN19/RPC4/PMRD/RC4 bidirectional PORTC I/O RC4 with analog input AN19, remappable pin RPC4, EBI output enable and PMP read strobe.
10 AN14/C1IND/ECOL/RPG6/SCK2/RG6 bidirectional PORTG I/O RG6 with analog input AN14, comparator 1 input C1IND, Ethernet collision detect ECOL, remappable RPG6 and SPI2 clock SCK2.
11 EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7 bidirectional PORTG I/O RG7 with analog input AN13, comparator input C1INC, Ethernet carrier sense ECRS, I2C4 data SDA4, EBI/PMP address bit 4.
12 EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8 bidirectional PORTG I/O RG8 with analog input AN12, comparator input C2IND, Ethernet receive data valid/carrier sense signals, I2C4 clock SCL4, EBI/PMP address bit 3.
13 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
14 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
15 MCLR input Master Clear active-low Reset input, also used for device programming and debugging.
16 EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9 bidirectional PORTG I/O RG9 with analog input AN11, comparator input C2INC, Ethernet receive/reference clock inputs, EBI/PMP address bit 2.
17 TMS/EBIA16/AN24/RA0 bidirectional PORTA I/O RA0 with JTAG Test Mode Select input TMS, analog input AN24 and EBI address bit 16.
18 AN25/AERXD0/RPE8/RE8 bidirectional PORTE I/O RE8 with analog input AN25, alternate Ethernet receive data 0 and remappable pin RPE8.
19 AN26/AERXD1/RPE9/RE9 bidirectional PORTE I/O RE9 with analog input AN26, alternate Ethernet receive data 1 and remappable pin RPE9.
20 AN45/C1INA/RPB5/RB5 bidirectional PORTB I/O RB5 with analog input AN45, comparator 1 positive input C1INA and remappable pin RPB5.
21 AN4/C1INB/RB4 bidirectional PORTB I/O RB4 with analog input AN4 and comparator 1 negative input C1INB.
22 AN3/C2INA/RPB3/RB3 bidirectional PORTB I/O RB3 with analog input AN3, comparator 2 positive input C2INA and remappable pin RPB3.
23 AN2/C2INB/RPB2/RB2 bidirectional PORTB I/O RB2 with analog input AN2, comparator 2 negative input C2INB and remappable pin RPB2.
24 PGEC1/AN1/RPB1/RB1 bidirectional PORTB I/O RB1 with analog input AN1 and programming/debugging clock input PGEC1 (channel 1).
25 PGED1/AN0/RPB0/RB0 bidirectional PORTB I/O RB0 with analog input AN0 and programming/debugging data I/O PGED1 (channel 1).
26 PGEC2/AN46/RPB6/RB6 bidirectional PORTB I/O RB6 with analog input AN46 and programming/debugging clock input PGEC2 (channel 2).
27 PGED2/AN47/RPB7/RB7 bidirectional PORTB I/O RB7 with analog input AN47 and programming/debugging data I/O PGED2 (channel 2).
28 VREF-/CVREF-/AN27/AERXD2/RA9 power_in Analog voltage reference (low) input VREF-/CVREF-, shared with AN27, alternate Ethernet receive data 2 and PORTA I/O RA9.
29 VREF+/CVREF+/AN28/AERXD3/RA10 power_in Analog voltage reference (high) input VREF+/CVREF+, shared with AN28, alternate Ethernet receive data 3 and PORTA I/O RA10.
30 AVDD power_in Positive supply for analog modules; must be connected at all times, even if the ADC is not used.
31 AVSS power_in Ground reference for analog modules; must be connected at all times.
32 EBIA10/AN48/RPB8/PMA10/RB8 bidirectional PORTB I/O RB8 with analog input AN48, remappable pin RPB8, EBI/PMP address bit 10.
33 EBIA7/AN49/RPB9/PMA7/RB9 bidirectional PORTB I/O RB9 with analog input AN49, remappable pin RPB9, EBI/PMP address bit 7.
34 EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10 bidirectional PORTB I/O RB10 with comparator voltage reference output CVREFOUT, analog input AN5, EBI/PMP address bit 13.
35 AN6/ERXERR/AETXERR/RB11 bidirectional PORTB I/O RB11 with analog input AN6, Ethernet receive error input ERXERR and alternate Ethernet transmit error AETXERR.
36 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
37 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
38 TCK/EBIA19/AN29/RA1 bidirectional PORTA I/O RA1 with JTAG Test Clock input TCK, analog input AN29 and EBI address bit 19.
39 TDI/EBIA18/AN30/RPF13/SCK5/RF13 bidirectional PORTF I/O RF13 with JTAG Test Data Input TDI, analog input AN30, SPI5 clock SCK5 and EBI address bit 18.
40 TDO/EBIA17/AN31/RPF12/RF12 bidirectional PORTF I/O RF12 with JTAG Test Data Output TDO, analog input AN31 and EBI address bit 17.
41 EBIA11/AN7/ERXD0/AECRS/PMA11/RB12 bidirectional PORTB I/O RB12 with analog input AN7, Ethernet receive data 0, alternate carrier sense AECRS, EBI/PMP address bit 11.
42 AN8/ERXD1/AECOL/RB13 bidirectional PORTB I/O RB13 with analog input AN8, Ethernet receive data 1 and alternate collision detect AECOL.
43 EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14 bidirectional PORTB I/O RB14 with analog input AN9, Ethernet receive data 2, SPI3 clock SCK3, EBI/PMP address bit 1.
44 EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15 bidirectional PORTB I/O RB15 with analog input AN10, Ethernet receive data 3, Output Compare Fault B input OCFB, EBI/PMP address bit 0.
45 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
46 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
47 AN32/AETXD0/RPD14/RD14 bidirectional PORTD I/O RD14 with analog input AN32, alternate Ethernet transmit data 0 and remappable pin RPD14.
48 AN33/AETXD1/RPD15/SCK6/RD15 bidirectional PORTD I/O RD15 with analog input AN33, alternate Ethernet transmit data 1 and SPI6 clock SCK6.
49 OSC1/CLKI/RC12 input Oscillator crystal input or external clock source input CLKI (ST buffer in RC mode, CMOS otherwise).
50 OSC2/CLKO/RC15 output Oscillator crystal output connecting to crystal or resonator; optionally CLKO in RC and EC modes.
51 VBUS power_in USB bus power monitor analog input.
52 VUSB3V3 power_in USB internal transceiver supply; must be connected to VSS if the USB module is not used.
53 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
54 D- bidirectional USB D- analog differential data line.
55 D+ bidirectional USB D+ analog differential data line.
56 RPF3/USBID/RF3 bidirectional PORTF I/O RF3 with USB OTG ID detect input USBID and remappable pin RPF3.
57 EBIRDY3/RPF2/SDA3/RF2 bidirectional PORTF I/O RF2 with EBI ready input EBIRDY3 and I2C3 data SDA3.
58 EBIRDY2/RPF8/SCL3/RF8 bidirectional PORTF I/O RF8 with EBI ready input EBIRDY2 and I2C3 clock SCL3.
59 EBICS0/SCL2/RA2 bidirectional PORTA I/O RA2 with EBI chip select 0 and I2C2 clock SCL2.
60 EBIRDY1/SDA2/RA3 bidirectional PORTA I/O RA3 with EBI ready input EBIRDY1 and I2C2 data SDA2.
61 EBIA14/PMCS1/PMA14/RA4 bidirectional PORTA I/O RA4 with EBI address bit 14, PMP chip select 1 and PMP address bit 14.
62 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
63 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
64 EBIA9/RPF4/SDA5/PMA9/RF4 bidirectional PORTF I/O RF4 with I2C5 data SDA5, EBI/PMP address bit 9.
65 EBIA8/RPF5/SCL5/PMA8/RF5 bidirectional PORTF I/O RF5 with I2C5 clock SCL5, EBI/PMP address bit 8.
66 AETXCLK/RPA14/SCL1/RA14 bidirectional PORTA I/O RA14 with alternate Ethernet transmit clock input AETXCLK and I2C1 clock SCL1.
67 AETXEN/RPA15/SDA1/RA15 bidirectional PORTA I/O RA15 with alternate Ethernet transmit enable AETXEN and I2C1 data SDA1.
68 EBIA15/RPD9/PMCS2/PMA15/RD9 bidirectional PORTD I/O RD9 with EBI address bit 15, PMP chip select 2 and PMP address bit 15.
69 RPD10/SCK4/RD10 bidirectional PORTD I/O RD10 with remappable pin RPD10 and SPI4 clock SCK4.
70 EMDC/AEMDC/RPD11/RD11 bidirectional PORTD I/O RD11 with Ethernet management data clock output EMDC/AEMDC.
71 EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0 bidirectional PORTD I/O RD0 with Ethernet management data I/O, RTCC alarm/seconds output and external interrupt INT0.
72 SOSCI/RPC13/RC13 input 32.768 kHz low-power secondary oscillator crystal input (ST/CMOS), shared with PORTC I/O RC13.
73 SOSCO/RPC14/T1CK/RC14 bidirectional 32.768 kHz secondary oscillator crystal output, shared with Timer1 external clock input T1CK and PORTC I/O RC14.
74 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
75 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
76 RPD1/SCK1/RD1 bidirectional PORTD I/O RD1 with remappable pin RPD1 and SPI1 clock SCK1.
77 EBID14/ETXEN/RPD2/PMD14/RD2 bidirectional PORTD I/O RD2 with Ethernet transmit enable ETXEN, EBI data bit 14 and PMP data bit 14.
78 EBID15/ETXCLK/RPD3/PMD15/RD3 bidirectional PORTD I/O RD3 with Ethernet transmit clock input ETXCLK, EBI data bit 15 and PMP data bit 15.
79 EBID12/ETXD2/RPD12/PMD12/RD12 bidirectional PORTD I/O RD12 with Ethernet transmit data 2, EBI data bit 12 and PMP data bit 12.
80 EBID13/ETXD3/PMD13/RD13 bidirectional PORTD I/O RD13 with Ethernet transmit data 3, EBI data bit 13 and PMP data bit 13.
81 SQICS0/RPD4/RD4 bidirectional PORTD I/O RD4 with Serial Quad Interface chip select 0 output.
82 SQICS1/RPD5/RD5 bidirectional PORTD I/O RD5 with Serial Quad Interface chip select 1 output.
83 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
84 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
85 EBID11/ETXD1/RPF0/PMD11/RF0 bidirectional PORTF I/O RF0 with Ethernet transmit data 1, EBI data bit 11 and PMP data bit 11.
86 EBID10/ETXD0/RPF1/PMD10/RF1 bidirectional PORTF I/O RF1 with Ethernet transmit data 0, EBI data bit 10 and PMP data bit 10.
87 EBID9/ETXERR/RPG1/PMD9/RG1 bidirectional PORTG I/O RG1 with Ethernet transmit error, EBI data bit 9 and PMP data bit 9.
88 EBID8/RPG0/PMD8/RG0 bidirectional PORTG I/O RG0 with EBI data bit 8 and PMP data bit 8.
89 TRCLK/SQICLK/RA6 bidirectional PORTA I/O RA6 with trace clock output TRCLK and Serial Quad Interface clock SQICLK.
90 TRD3/SQID3/RA7 bidirectional PORTA I/O RA7 with trace data bit 3 and Serial Quad Interface data 3.
91 EBID0/PMD0/RE0 bidirectional PORTE I/O RE0 with EBI data bit 0 and PMP data bit 0.
92 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
93 VDD power_in Positive supply for peripheral logic and I/O pins (2.1V to 3.6V); must be connected at all times.
94 EBID1/PMD1/RE1 bidirectional PORTE I/O RE1 with EBI data bit 1 and PMP data bit 1.
95 TRD2/SQID2/RG14 bidirectional PORTG I/O RG14 with trace data bit 2 and Serial Quad Interface data 2.
96 TRD1/SQID1/RG12 bidirectional PORTG I/O RG12 with trace data bit 1 and Serial Quad Interface data 1.
97 TRD0/SQID0/RG13 bidirectional PORTG I/O RG13 with trace data bit 0 and Serial Quad Interface data 0.
98 EBID2/PMD2/RE2 bidirectional PORTE I/O RE2 with EBI data bit 2 and PMP data bit 2.
99 EBID3/RPE3/PMD3/RE3 bidirectional PORTE I/O RE3 with EBI data bit 3 and PMP data bit 3.
100 EBID4/AN18/PMD4/RE4 bidirectional PORTE I/O RE4 with analog input AN18, EBI data bit 4 and PMP data bit 4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-100(12x12)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply voltage VDD 2.1 3.6 V -40ºC to +85ºC, DC to 252 MHz 1
Operating temperature TA -40 85 ºC 2.1V to 3.6V, DC to 252 MHz 1
CPU operating frequency 252 MHz 2.1V to 3.6V, -40ºC to +85ºC (DC to 252 MHz) 1
Voltage on 5V tolerant pins when VDD < 2.1V 3.2 V VDD < 2.1V (power up/power down), relative to VSS 51
Temperature sensor accuracy -2 2 ºC 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS CLR or INV register, the base register must be read. 12.4 Peripheral Pin Select (PPS) 261

CAD (KiCad official)

  • Symbol: PIC32MZ2048EFH100-250I
  • Footprint: Package_QFP:TQFP-100_12x12mm_P0.4mm
  • 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
  • 3D model files: pic32mz2048efh100-250i-etched.step / pic32mz2048efh100-250i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mz2048efh100-250i.step / pic32mz2048efh100-250i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (760 pp, sha256 735501a915a04025, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC32MZ2048EFH100-250I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC32MZ2048EFH100-250I/PF