Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MZ2048EFH064-250I/MR
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-64-EP(9x9)
PIC32MZ2048EFH064-250I from Microchip Tech, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AN17/ETXEN/RPE5/PMD5/RE5 | bidirectional | Analog input AN17 of the 12-bit ADC, multiplexed with ETXEN, remappable RPE5, PMP data PMD5 and PORTE I/O RE5 (ST input buffer). |
| 2 | AN16/ETXD0/PMD6/RE6 | bidirectional | Analog input AN16 of the ADC, multiplexed with Ethernet ETXD0, PMP data PMD6 and PORTE I/O RE6 (ST input buffer). |
| 3 | AN15/ETXD1/PMD7/RE7 | bidirectional | Analog input AN15 of the ADC, multiplexed with Ethernet ETXD1, PMP data PMD7 and PORTE I/O RE7 (ST input buffer). |
| 4 | AN14/C1IND/RPG6/SCK2/PMA5/RG6 | bidirectional | Analog input AN14 of the ADC, also Comparator 1 input C1IND, multiplexed with remappable RPG6, SPI2 clock SCK2, PMP address PMA5 and PORTG I/O RG6 (ST input buffer). |
| 5 | AN13/C1INC/RPG7/SDA4/PMA4/RG7 | bidirectional | Analog input AN13 of the ADC, also Comparator 1 input C1INC, multiplexed with remappable RPG7, I2C4 data SDA4, PMP address PMA4 and PORTG I/O RG7 (ST input buffer). |
| 6 | AN12/C2IND/RPG8/SCL4/PMA3/RG8 | bidirectional | Analog input AN12 of the ADC, also Comparator 2 input C2IND, multiplexed with remappable RPG8, I2C4 clock SCL4, PMP address PMA3 and PORTG I/O RG8 (ST input buffer). |
| 7 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 8 | VDD | power_in | Positive supply for peripheral logic and I/O pins; this pin must be connected at all times. |
| 9 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device, with ST input buffer. |
| 10 | AN11/C2INC/RPG9/PMA2/RG9 | bidirectional | Analog input AN11 of the ADC, also Comparator 2 input C2INC, multiplexed with remappable RPG9, PMP address PMA2 and PORTG I/O RG9 (ST input buffer). |
| 11 | AN45/C1INA/RPB5/RB5 | bidirectional | Analog input AN45 of the ADC, also Comparator 1 positive input C1INA, multiplexed with remappable RPB5 and PORTB I/O RB5 (ST input buffer). |
| 12 | AN4/C1INB/RB4 | bidirectional | Analog input AN4 of the ADC, also Comparator 1 selectable negative input C1INB, and PORTB I/O RB4 (ST input buffer). |
| 13 | AN3/C2INA/RPB3/RB3 | bidirectional | Analog input AN3 of the ADC, also Comparator 2 positive input C2INA, multiplexed with remappable RPB3 and PORTB I/O RB3 (ST input buffer). |
| 14 | AN2/C2INB/RPB2/RB2 | bidirectional | Analog input AN2 of the ADC, also Comparator 2 selectable negative input C2INB, multiplexed with remappable RPB2 and PORTB I/O RB2 (ST input buffer). |
| 15 | PGEC1/VREF-/CVREF-/AN1/RPB1/RB1 | bidirectional | Clock input pin for programming/debugging channel 1 (PGEC1, ST input), also analog voltage reference low input VREF-, ADC input AN1 and PORTB I/O RB1. |
| 16 | PGED1/VREF+/CVREF+/AN0/RPB0/PMA6/RB0 | bidirectional | Data I/O pin for programming/debugging channel 1 (PGED1, ST input), also analog voltage reference high input VREF+, ADC input AN0 and PORTB I/O RB0. |
| 17 | PGEC2/AN46/RPB6/RB6 | bidirectional | Clock input pin for programming/debugging channel 2 (PGEC2, ST input), also ADC input AN46, remappable RPB6 and PORTB I/O RB6. |
| 18 | PGED2/AN47/RPB7/RB7 | bidirectional | Data I/O pin for programming/debugging channel 2 (PGED2, ST input), also ADC input AN47, remappable RPB7 and PORTB I/O RB7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times, regardless of ADC use. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times, regardless of ADC use. |
| 21 | AN48/RPB8/PMA10/RB8 | bidirectional | Analog input AN48 of the ADC, multiplexed with remappable RPB8, PMP address PMA10 and PORTB I/O RB8 (ST input buffer). |
| 22 | AN49/RPB9/PMA7/RB9 | bidirectional | Analog input AN49 of the ADC, multiplexed with remappable RPB9, PMP address PMA7 and PORTB I/O RB9 (ST input buffer). |
| 23 | TMS/CVREFOUT/AN5/RPB10/PMA13/RB10 | bidirectional | JTAG Test Mode Select input (TMS, ST), also comparator voltage reference output CVREFOUT, ADC input AN5, remappable RPB10, PMP address PMA13 and PORTB I/O RB10. |
| 24 | TDO/AN6/PMA12/RB11 | bidirectional | JTAG Test Data Output pin (TDO), also ADC input AN6, PMP address PMA12 and PORTB I/O RB11 (ST input buffer). |
| 25 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins; this pin must be connected at all times. |
| 27 | TCK/AN7/PMA11/RB12 | bidirectional | JTAG Test Clock input pin (TCK, ST), also ADC input AN7, PMP address PMA11 and PORTB I/O RB12. |
| 28 | TDI/AN8/RB13 | bidirectional | JTAG Test Data Input pin (TDI, ST), also ADC input AN8 and PORTB I/O RB13. |
| 29 | AN9/RPB14/SCK3/PMA1/RB14 | bidirectional | Analog input AN9 of the ADC, multiplexed with remappable RPB14, SPI3 clock SCK3, PMP address PMA1 and PORTB I/O RB14 (ST input buffer). |
| 30 | AN10/EMDC/AEMDC/RPB15/OCFB/PMA0/RB15 | bidirectional | Analog input AN10 of the ADC, multiplexed with Ethernet management clock EMDC, output compare fault B input OCFB, PMP address PMA0 and PORTB I/O RB15 (ST input buffer). |
| 31 | OSC1/CLKI/RC12 | input | Oscillator crystal input (OSC1) and external clock source input (CLKI), with ST buffer in RC mode and CMOS otherwise; also PORTC I/O RC12. |
| 32 | OSC2/CLKO/RC15 | output | Oscillator crystal output (OSC2) that connects to the crystal or resonator in crystal mode, optionally functioning as CLKO in RC and EC modes; also PORTC I/O RC15. |
| 33 | VBUS | power_in | USB bus power monitor input; voltage on VBUS with respect to VSS must stay within -0.3V to +5.5V. |
| 34 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VSS. |
| 35 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 36 | D- | bidirectional | USB D- data line (analog I/O); voltage on D+ or D- with respect to VUSB3V3 must stay within -0.3V to (VUSB3V3 + 0.3V). |
| 37 | D+ | bidirectional | USB D+ data line (analog I/O); voltage on D+ or D- with respect to VUSB3V3 must stay within -0.3V to (VUSB3V3 + 0.3V). |
| 38 | RPF3/USBID/RF3 | bidirectional | USB OTG ID detect input (USBID, ST), also remappable RPF3 and PORTF I/O RF3; the USBID function is not available when VUSB3V3 is connected to VSS. |
| 39 | VDD | power_in | Positive supply for peripheral logic and I/O pins; this pin must be connected at all times. |
| 40 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 41 | RPF4/SDA5/PMA9/RF4 | bidirectional | Remappable RPF4 and PORTF I/O RF4, also I2C5 data SDA5 and PMP address PMA9 (ST input buffer). |
| 42 | RPF5/SCL5/PMA8/RF5 | bidirectional | Remappable RPF5 and PORTF I/O RF5, also I2C5 clock SCL5 and PMP address PMA8 (ST input buffer). |
| 43 | AERXD0/ETXD2/RPD9/SDA1/PMCS2/PMA15/RD9 | bidirectional | Alternate Ethernet receive data AERXD0 (RMII/MII alternate interface), also Ethernet transmit data ETXD2, remappable RPD9, I2C1 data SDA1, PMP chip select PMCS2 and PORTD I/O RD9. |
| 44 | ECOL/RPD10/SCL1/SCK4/RD10 | bidirectional | Ethernet collision detect input ECOL (ST), also remappable RPD10, I2C1 clock SCL1, SPI4 clock SCK4 and PORTD I/O RD10. |
| 45 | AERXCLK/AEREFCLK/ECRS/RPD11/PMCS1/PMA14/RD11 | bidirectional | Alternate Ethernet receive clock AERXCLK / reference clock AEREFCLK, also Ethernet carrier sense ECRS, remappable RPD11, PMP chip select PMCS1, PMP address PMA14 and PORTD I/O RD11. |
| 46 | AERXD1/ETXD3/RPD0/RTCC/INT0/RD0 | bidirectional | Alternate Ethernet receive data AERXD1, also Ethernet transmit data ETXD3, remappable RPD0, RTCC alarm/seconds output, external interrupt INT0 and PORTD I/O RD0 (ST input buffer). |
| 47 | SOSCI/RPC13/RC13 | input | 32.768 kHz low-power oscillator crystal input (SOSCI, ST/CMOS buffer), also remappable RPC13 and PORTC I/O RC13. |
| 48 | SOSCO/RPC14/T1CK/RC14 | output | 32.768 kHz low-power oscillator crystal output (SOSCO), also remappable RPC14, Timer1 external clock input T1CK and PORTC I/O RC14. |
| 49 | EMDIO/AEMDIO/RPD1/SCK1/RD1 | bidirectional | Ethernet management data I/O (EMDIO), also alternate management data AEMDIO, remappable RPD1, SPI1 clock SCK1 and PORTD I/O RD1 (ST input buffer). |
| 50 | ETXERR/AETXEN/RPD2/SDA3/RD2 | bidirectional | Ethernet transmit error output ETXERR, also alternate transmit enable AETXEN, remappable RPD2, I2C3 data SDA3 and PORTD I/O RD2 (ST input buffer). |
| 51 | AERXERR/ETXCLK/RPD3/SCL3/RD3 | bidirectional | Alternate Ethernet receive error input AERXERR, also Ethernet transmit clock ETXCLK, remappable RPD3, I2C3 clock SCL3 and PORTD I/O RD3 (ST input buffer). |
| 52 | SQICS0/RPD4/PMWR/RD4 | bidirectional | Serial Quad Interface chip select 0 (SQICS0), also remappable RPD4, PMP write strobe PMWR and PORTD I/O RD4 (ST input buffer). |
| 53 | SQICS1/RPD5/PMRD/RD5 | bidirectional | Serial Quad Interface chip select 1 (SQICS1), also remappable RPD5, PMP read strobe PMRD and PORTD I/O RD5 (ST input buffer). |
| 54 | VDD | power_in | Positive supply for peripheral logic and I/O pins; this pin must be connected at all times. |
| 55 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 56 | ERXD3/AETXD1/RPF0/RF0 | bidirectional | Ethernet receive data ERXD3, also alternate transmit data AETXD1, remappable RPF0 and PORTF I/O RF0 (ST input buffer). |
| 57 | TRCLK/SQICLK/ERXD2/AETXD0/RPF1/RF1 | bidirectional | Trace clock TRCLK, also Serial Quad Interface clock SQICLK, Ethernet receive data ERXD2, alternate transmit data AETXD0, remappable RPF1 and PORTF I/O RF1 (ST input buffer). |
| 58 | TRD0/SQID0/ERXD1/PMD0/RE0 | bidirectional | Trace data bit 0 TRD0, also SQI data 0 SQID0, Ethernet receive data ERXD1, PMP data PMD0 and PORTE I/O RE0 (ST input buffer). |
| 59 | VSS | power_in | Ground reference for logic, I/O pins, and USB; this pin must be connected at all times. |
| 60 | VDD | power_in | Positive supply for peripheral logic and I/O pins; this pin must be connected at all times. |
| 61 | TRD1/SQID1/ERXD0/PMD1/RE1 | bidirectional | Trace data bit 1 TRD1, also SQI data 1 SQID1, Ethernet receive data ERXD0, PMP data PMD1 and PORTE I/O RE1 (ST input buffer). |
| 62 | TRD2/SQID2/ERXDV/ECRSDV/AECRSDV/PMD2/RE2 | bidirectional | Trace data bit 2 TRD2, also SQI data 2 SQID2, Ethernet receive data valid ERXDV / carrier sense data valid ECRSDV, PMP data PMD2 and PORTE I/O RE2 (ST input buffer). |
| 63 | TRD3/SQID3/ERXCLK/EREFCLK/RPE3/PMD3/RE3 | bidirectional | Trace data bit 3 TRD3, also SQI data 3 SQID3, Ethernet receive clock ERXCLK / reference clock EREFCLK, remappable RPE3, PMP data PMD3 and PORTE I/O RE3 (ST input buffer). |
| 64 | AN18/ERXERR/PMD4/RE4 | bidirectional | Analog input AN18 of the ADC, multiplexed with Ethernet receive error ERXERR, PMP data PMD4 and PORTE I/O RE4 (ST input buffer). |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-64-EP(9x9) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage (VDD), industrial grade, 252 MHz | 2.1 | 3.6 | V | -40ºC to +85ºC, DC to 252 MHz | 1 | ||
| Operating temperature range, industrial, 252 MHz | -40 | 85 | ºC | 2.1V to 3.6V, DC to 252 MHz | 1 | ||
| Maximum operating frequency (speed rating) | 252 | MHz | 2.1V to 3.6V, -40ºC to +85ºC; printed as DC to 252 MHz, minimum not given as a number | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 12.4 Peripheral Pin Select (PPS) | 261 |
CAD (KiCad official)
- Symbol:
PIC32MZ2048EFH064-250I - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
pic32mz2048efh064-250i-etched.step/pic32mz2048efh064-250i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mz2048efh064-250i.step/pic32mz2048efh064-250i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (760 pp, sha256
735501a915a04025, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC32MZ2048EFH064-250I/MR. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC32MZ2048EFH064-250I/PT