3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC32MX795F512L-80V
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)
PIC32MX795F512L-80V from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AERXERR/RG15 | bidirectional | PORTG I/O RG15 (ST) shared with the alternate Ethernet receive error input AERXERR. |
| 2 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 3 | PMD5/RE5 | bidirectional | PORTE I/O RE5 shared with Parallel Master Port data bit 5. |
| 4 | PMD6/RE6 | bidirectional | PORTE I/O RE6 shared with Parallel Master Port data bit 6. |
| 5 | PMD7/RE7 | bidirectional | PORTE I/O RE7 shared with Parallel Master Port data bit 7. |
| 6 | T2CK/RC1 | bidirectional | PORTC I/O RC1 shared with the Timer2 external clock input. |
| 7 | RC2 | bidirectional | PORTC I/O RC2 shared with the Timer3 external clock input and alternate CAN2 transmit (AC2TX). |
| 8 | RC3 | bidirectional | PORTC I/O RC3 shared with the Timer4 external clock input and alternate CAN2 receive (AC2RX). |
| 9 | T5CK/SDI1/RC4 | bidirectional | PORTC I/O RC4 shared with the Timer5 external clock input and SPI1 data in. |
| 10 | ECOL/SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG I/O RG6 shared with Ethernet collision detect, SPI2 clock, UART6 transmit, UART3 ready-to-send, PMP address 5 and change notification CN8. |
| 11 | ECRS/SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG I/O RG7 shared with Ethernet carrier sense, I2C4 data, SPI2 data in, UART3 receive, PMP address 4 and CN9. |
| 12 | ERXDV/AERXDV/ECRSDV/AECRSDV/SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG I/O RG8 shared with Ethernet receive data valid / carrier sense data valid (primary and alternate), I2C4 clock, SPI2 data out, UART3 transmit, PMP address 3 and CN10. |
| 13 | MCLR | input | Master Clear (Reset) input, active-low Reset to the device, also used for programming and debugging. |
| 14 | ERXCLK/AERXCLK/EREFCLK/AEREFCLK/SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG I/O RG9 shared with Ethernet receive/reference clock (primary and alternate), SPI2 slave select, UART6 receive, UART3 clear-to-send, PMP address 2 and CN11. |
| 15 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 16 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 17 | TMS/RA0 | bidirectional | JTAG test mode select input shared with PORTA I/O RA0. |
| 18 | AERXD0/INT1/RE8 | bidirectional | PORTE I/O RE8 shared with alternate Ethernet receive data 0 and external interrupt 1. |
| 19 | AERXD1/INT2/RE9 | bidirectional | PORTE I/O RE9 shared with alternate Ethernet receive data 1 and external interrupt 2. |
| 20 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | PORTB I/O RB5 shared with analog input 5, Comparator 1 positive input, USB bus power control output VBUSON and CN7. |
| 21 | AN4/C1IN-/CN6/RB4 | bidirectional | PORTB I/O RB4 shared with analog input 4, Comparator 1 negative input and CN6. |
| 22 | AN3/C2IN+/CN5/RB3 | bidirectional | PORTB I/O RB3 shared with analog input 3, Comparator 2 positive input and CN5. |
| 23 | AN2/C2IN-/CN4/RB2 | bidirectional | PORTB I/O RB2 shared with analog input 2, Comparator 2 negative input and CN4. |
| 24 | PGEC1/AN1/CN3/RB1 | bidirectional | PORTB I/O RB1 shared with ICSP clock input channel 1, analog input 1 and CN3. |
| 25 | PGED1/AN0/CN2/RB0 | bidirectional | PORTB I/O RB0 shared with ICSP data I/O channel 1, analog input 0 and CN2. |
| 26 | PGEC2/AN6/OCFA/RB6 | bidirectional | PORTB I/O RB6 shared with ICSP clock input channel 2, analog input 6 and Output Compare Fault A input. |
| 27 | PGED2/AN7/RB7 | bidirectional | PORTB I/O RB7 shared with ICSP data I/O channel 2 and analog input 7. |
| 28 | VREF-/CVREF-/AERXD2/PMA7/RA9 | power_in | PORTA I/O RA9 shared with ADC/comparator low voltage reference input, alternate Ethernet receive data 2 and PMP address 7. |
| 29 | VREF+/CVREF+/AERXD3/PMA6/RA10 | power_in | PORTA I/O RA10 shared with ADC/comparator high voltage reference input, alternate Ethernet receive data 3 and PMP address 6. |
| 30 | AVDD | power_in | Positive supply for analog modules; must be connected at all times. |
| 31 | AVSS | power_in | Ground reference for analog modules. |
| 32 | AN8/C1OUT/RB8 | bidirectional | PORTB I/O RB8 shared with analog input 8 and Comparator 1 output. |
| 33 | AN9/C2OUT/RB9 | bidirectional | PORTB I/O RB9 shared with analog input 9 and Comparator 2 output. |
| 34 | AN10/CVREFOUT/PMA13/RB10 | bidirectional | PORTB I/O RB10 shared with analog input 10, comparator voltage reference output and PMP address 13. |
| 35 | AN11/ERXERR/AETXERR/PMA12/RB11 | bidirectional | PORTB I/O RB11 shared with analog input 11, Ethernet receive error input, alternate Ethernet transmit error and PMP address 12. |
| 36 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 38 | TCK/RA1 | bidirectional | JTAG test clock input shared with PORTA I/O RA1. |
| 39 | AC1TX/SCK4/U5TX/U2RTS/RF13 | bidirectional | PORTF I/O RF13 shared with alternate CAN1 transmit, SPI4 clock, UART5 transmit and UART2 ready-to-send. |
| 40 | AC1RX/SS4/U5RX/U2CTS/RF12 | bidirectional | PORTF I/O RF12 shared with alternate CAN1 receive, SPI4 slave select, UART5 receive and UART2 clear-to-send. |
| 41 | AN12/ERXD0/AECRS/PMA11/RB12 | bidirectional | PORTB I/O RB12 shared with analog input 12, Ethernet receive data 0, alternate Ethernet carrier sense and PMP address 11. |
| 42 | AN13/ERXD1/AECOL/PMA10/RB13 | bidirectional | PORTB I/O RB13 shared with analog input 13, Ethernet receive data 1, alternate Ethernet collision detect and PMP address 10. |
| 43 | AN14/ERXD2/AETXD3/PMALH/PMA1/RB14 | bidirectional | PORTB I/O RB14 shared with analog input 14, Ethernet receive data 2, alternate Ethernet transmit data 3, PMP address latch high and PMP address 1. |
| 44 | AN15/ERXD3/AETXD2/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | PORTB I/O RB15 shared with analog input 15, Ethernet receive data 3, alternate Ethernet transmit data 2, Output Compare Fault B, PMP address latch low, PMP address 0 and CN12. |
| 45 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 47 | AETXD0/SS3/U4RX/U1CTS/CN20/RD14 | bidirectional | PORTD I/O RD14 shared with alternate Ethernet transmit data 0, SPI3 slave select, UART4 receive, UART1 clear-to-send and CN20. |
| 48 | AETXD1/SCK3/U4TX/U1RTS/CN21/RD15 | bidirectional | PORTD I/O RD15 shared with alternate Ethernet transmit data 1, SPI3 clock, UART4 transmit, UART1 ready-to-send and CN21. |
| 49 | SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | PORTF I/O RF4 shared with I2C5 data, SPI4 data in, UART2 receive, PMP address 9 and CN17. |
| 50 | SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | PORTF I/O RF5 shared with I2C5 clock, SPI4 data out, UART2 transmit, PMP address 8 and CN18. |
| 51 | USBID/RF3 | bidirectional | USB OTG ID detect input shared with PORTF I/O RF3. |
| 52 | SDA3/SDI3/U1RX/RF2 | bidirectional | PORTF I/O RF2 shared with I2C3 data, SPI3 data in and UART1 receive. |
| 53 | SCL3/SDO3/U1TX/RF8 | bidirectional | PORTF I/O RF8 shared with I2C3 clock, SPI3 data out and UART1 transmit. |
| 54 | VBUS | power_in | USB bus power monitor analog input. |
| 55 | VUSB3V3 | power_in | USB internal transceiver supply; must be connected to VDD if the USB module is not used. |
| 56 | D-/RG3 | bidirectional | USB D- data line shared with PORTG input RG3. |
| 57 | D+/RG2 | bidirectional | USB D+ data line shared with PORTG input RG2. |
| 58 | SCL2/RA2 | bidirectional | PORTA I/O RA2 shared with I2C2 clock. |
| 59 | SDA2/RA3 | bidirectional | PORTA I/O RA3 shared with I2C2 data. |
| 60 | TDI/RA4 | bidirectional | JTAG test data input shared with PORTA I/O RA4. |
| 61 | TDO/RA5 | bidirectional | JTAG test data output shared with PORTA I/O RA5. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 63 | OSC1/CLKI/RC12 | bidirectional | Oscillator crystal input or external clock source input shared with PORTC I/O RC12. |
| 64 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output or CLKO shared with PORTC I/O RC15. |
| 65 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 66 | AETXCLK/SCL1/INT3/RA14 | bidirectional | PORTA I/O RA14 shared with alternate Ethernet transmit clock, I2C1 clock and external interrupt 3. |
| 67 | AETXEN/SDA1/INT4/RA15 | bidirectional | PORTA I/O RA15 shared with alternate Ethernet transmit enable, I2C1 data and external interrupt 4. |
| 68 | RTCC/EMDIO/AEMDIO/IC1/RD8 | bidirectional | PORTD I/O RD8 shared with RTCC alarm output, Ethernet management data (primary and alternate) and Input Capture 1. |
| 69 | SS1/IC2/RD9 | bidirectional | PORTD I/O RD9 shared with SPI1 slave select and Input Capture 2. |
| 70 | SCK1/IC3/PMCS2/PMA15/RD10 | bidirectional | PORTD I/O RD10 shared with SPI1 clock, Input Capture 3, PMP chip select 2 and PMP address 15. |
| 71 | EMDC/AEMDC/IC4/PMCS1/PMA14/RD11 | bidirectional | PORTD I/O RD11 shared with Ethernet management clock (primary and alternate), Input Capture 4, PMP chip select 1 and PMP address 14. |
| 72 | SDO1/OC1/INT0/RD0 | bidirectional | PORTD I/O RD0 shared with SPI1 data out, Output Compare 1 and external interrupt 0. |
| 73 | SOSCI/CN1/RC13 | bidirectional | 32.768 kHz secondary oscillator crystal input shared with CN1 and PORTC I/O RC13. |
| 74 | SOSCO/T1CK/CN0/RC14 | bidirectional | 32.768 kHz secondary oscillator crystal output shared with Timer1 clock input, CN0 and PORTC I/O RC14. |
| 75 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 76 | OC2/RD1 | bidirectional | PORTD I/O RD1 shared with Output Compare 2. |
| 77 | OC3/RD2 | bidirectional | PORTD I/O RD2 shared with Output Compare 3. |
| 78 | OC4/RD3 | bidirectional | PORTD I/O RD3 shared with Output Compare 4. |
| 79 | ETXD2/IC5/PMD12/RD12 | bidirectional | PORTD I/O RD12 shared with Ethernet transmit data 2, Input Capture 5 and PMP data bit 12. |
| 80 | ETXD3/PMD13/CN19/RD13 | bidirectional | PORTD I/O RD13 shared with Ethernet transmit data 3, PMP data bit 13 and CN19. |
| 81 | OC5/PMWR/CN13/RD4 | bidirectional | PORTD I/O RD4 shared with Output Compare 5, PMP write strobe and CN13. |
| 82 | PMRD/CN14/RD5 | bidirectional | PORTD I/O RD5 shared with PMP read strobe and CN14. |
| 83 | ETXEN/PMD14/CN15/RD6 | bidirectional | PORTD I/O RD6 shared with Ethernet transmit enable, PMP data bit 14 and CN15. |
| 84 | ETXCLK/PMD15/CN16/RD7 | bidirectional | PORTD I/O RD7 shared with Ethernet transmit clock, PMP data bit 15 and CN16. |
| 85 | VCAP/VDDCORE | passive | Connection for the capacitor of the internal voltage regulator; must not be connected to VDD and requires a low-ESR capacitor of at least 6V rating to ground. |
| 86 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 87 | C1RX/ETXD1/PMD11/RF0 | bidirectional | PORTF I/O RF0 shared with CAN1 receive, Ethernet transmit data 1 and PMP data bit 11. |
| 88 | C1TX/ETXD0/PMD10/RF1 | bidirectional | PORTF I/O RF1 shared with CAN1 transmit, Ethernet transmit data 0 and PMP data bit 10. |
| 89 | RG1 | bidirectional | PORTG I/O RG1 shared with CAN2 transmit, Ethernet transmit error and PMP data bit 9. |
| 90 | RG0 | bidirectional | PORTG I/O RG0 shared with CAN2 receive and PMP data bit 8. |
| 91 | TRCLK/RA6 | bidirectional | Trace clock output shared with PORTA I/O RA6. |
| 92 | TRD3/RA7 | bidirectional | Trace data bit 3 output shared with PORTA I/O RA7. |
| 93 | PMD0/RE0 | bidirectional | PORTE I/O RE0 shared with PMP data bit 0. |
| 94 | PMD1/RE1 | bidirectional | PORTE I/O RE1 shared with PMP data bit 1. |
| 95 | TRD2/RG14 | bidirectional | Trace data bit 2 output shared with PORTG I/O RG14. |
| 96 | TRD1/RG12 | bidirectional | Trace data bit 1 output shared with PORTG I/O RG12. |
| 97 | TRD0/RG13 | bidirectional | Trace data bit 0 output shared with PORTG I/O RG13. |
| 98 | PMD2/RE2 | bidirectional | PORTE I/O RE2 shared with PMP data bit 2. |
| 99 | PMD3/RE3 | bidirectional | PORTE I/O RE3 shared with PMP data bit 3. |
| 100 | PMD4/RE4 | bidirectional | PORTE I/O RE4 shared with PMP data bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating junction temperature range (V-Temp) | TJ | -40 | 140 | °C | V-Temp Temperature Devices | 356 | |
| Operating ambient temperature range (V-Temp) | TA | -40 | 105 | °C | V-Temp Temperature Devices | 356 | |
| VDD range for operation | VDD | 2.3 | 3.6 | V | DC5b, -40°C to +105°C | 356 | |
| Maximum frequency | 80 | MHz | DC5b, 2.3-3.6V, -40°C to +105°C | 356 | |||
| Package thermal resistance, 100-Pin TQFP (12x12x1 mm) | θJA | 43 | °C/W | Note 1: package simulations | 356 |
CAD (KiCad official)
- Symbol:
PIC32MX795F512L-80V - Footprint:
Package_QFP:TQFP-100_12x12mm_P0.4mm - 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic32mx795f512l-80v-etched.step/pic32mx795f512l-80v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx795f512l-80v.step/pic32mx795f512l-80v.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).