main
Ray
Publish 0.1.0
dce3215
PIC32MX795F512H-80I
Microchip Tech · Pre-ordered MCUs · TQFP-64(10x10)
PIC32MX795F512H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | Multiplexed Ethernet transmit enable, PMP data bit 5 and PORTE bit 5; I/O is a 5V-tolerant TTL/ST buffer per the pinout table. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | Multiplexed Ethernet transmit data 0, PMP data bit 6 and PORTE bit 6 I/O. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | Multiplexed Ethernet transmit data 1, PMP data bit 7 and PORTE bit 7 I/O. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | SPI2 serial clock input/output, multiplexed with UART6/UART3 and PMP address and change notice CN8 on RG6. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | I2C4 serial data input/output, multiplexed with SPI2 data in, UART3 receive and PMP address on RG7. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | I2C4 serial clock input/output, multiplexed with SPI2 data out, UART3 transmit and PMP address on RG8. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | SPI2 slave select I/O, multiplexed with UART6 receive, UART3 clear to send and PMP address on RG9. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | Analog input AN5, Comparator 1 positive input, USB VBUS on control output and PORTB bit 5. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | Analog input AN4, Comparator 1 negative input and PORTB bit 4. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | Analog input AN3, Comparator 2 positive input and PORTB bit 3. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | Analog input AN2, Comparator 2 negative input and PORTB bit 2. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | Programming/debug clock input for channel 1, analog input AN1, analog voltage reference (low) input and PORTB bit 1. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Programming/debug data I/O for channel 1, analog input AN0, analog voltage reference (high) input and PORTB bit 0. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | Programming/debug clock input for channel 2, analog input AN6, Output Compare Fault A input and PORTB bit 6. |
| 18 | PGED2/AN7/RB7 | bidirectional | Programming/debug data I/O for channel 2, analog input AN7 and PORTB bit 7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX(2)/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | Analog input AN8, CAN2 transmit (footnoted), SPI4 slave select, Comparator 1 output and PORTB bit 8. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | Analog input AN9, Comparator 2 output, PMP address bit 7 and PORTB bit 9. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | JTAG test mode select input, analog input AN10, comparator voltage reference output and PORTB bit 10. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | JTAG test data output, analog input AN11, PMP address bit 12 and PORTB bit 11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | JTAG test clock input, analog input AN12, PMP address bit 11 and PORTB bit 12. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | JTAG test data input, analog input AN13, PMP address bit 10 and PORTB bit 13. |
| 29 | AN14/C2RX(2)/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | bidirectional | Analog input AN14, CAN2 receive (footnoted), SPI4 clock, PMP address latch high and PORTB bit 14. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | Analog input AN15, Ethernet management clock, Output Compare Fault B input, PMP address latch low and PORTB bit 15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | Alternate CAN1 transmit, I2C5 serial data, SPI4 data in, UART2 receive and PORTF bit 4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | Alternate CAN1 receive, I2C5 serial clock, SPI4 data out, UART2 transmit and PORTF bit 5. |
| 33 | USBID/RF3 | input | USB OTG ID detect input and PORTF bit 3. |
| 34 | VBUS | power_in | USB bus power monitor input. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- differential data line and PORTG bit 3. |
| 37 | D+/RG2 | bidirectional | USB D+ differential data line and PORTG bit 2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input and external clock source input, also PORTC bit 12. |
| 40 | OSC2/CLKO/RC15 | output | Oscillator crystal output, optionally CLKO in RC and EC modes, and PORTC bit 15. |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | Real-Time Clock alarm output, alternate Ethernet receive data 1, Ethernet transmit data 3, input capture 1, external interrupt 1 and PORTD bit 8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | Alternate Ethernet receive data 0, Ethernet transmit data 2, SPI3 slave select, I2C1 serial data, input capture 2, external interrupt 2 and PORTD bit 9. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | Ethernet collision detect, alternate Ethernet carrier sense data valid, I2C1 serial clock, input capture 3, PMP chip select 2 and PORTD bit 10. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | Ethernet carrier sense, alternate Ethernet reference clock, input capture 4, PMP chip select 1 and PORTD bit 11. |
| 46 | OC1/INT0/RD0 | output | Output Compare output 1, external interrupt 0 and PORTD bit 0. |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input, change notice CN1 and PORTC bit 13. |
| 48 | SOSCO/T1CK/CN0/RC14 | output | 32.768 kHz low-power oscillator crystal output, Timer1 external clock input and PORTC bit 14. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | Ethernet management data I/O, alternate Ethernet management data, SPI3 clock, UART4 transmit, Output Compare 2 and PORTD bit 1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 serial data, SPI3 data in, UART1 receive, Output Compare 3 and PORTD bit 2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 serial clock, SPI3 data out, UART1 transmit, Output Compare 4 and PORTD bit 3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | Output Compare 5, input capture 5, PMP write strobe, change notice CN13 and PORTD bit 4. |
| 53 | PMRD/CN14/RD5 | bidirectional | PMP read strobe, change notice CN14 and PORTD bit 5. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | Alternate Ethernet transmit enable, Ethernet transmit error, change notice CN15 and PORTD bit 6. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | Ethernet transmit clock, alternate Ethernet receive error, change notice CN16 and PORTD bit 7. |
| 56 | VCAP | passive | Capacitor for internal voltage regulator; must not be connected to VDD and requires a low-ESR capacitor to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | bidirectional | CAN1 bus receive, alternate Ethernet transmit data 1, Ethernet receive data 3 and PORTF bit 0. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | bidirectional | CAN1 bus transmit, alternate Ethernet transmit data 0, Ethernet receive data 2 and PORTF bit 1. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | Ethernet receive data 1, PMP data bit 0 and PORTE bit 0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | Ethernet receive data 0, PMP data bit 1 and PORTE bit 1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | Ethernet receive data valid, Ethernet carrier sense data valid, PMP data bit 2 and PORTE bit 2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | Ethernet receive clock or reference clock, PMP data bit 3 and PORTE bit 3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | Ethernet receive error input, PMP data bit 4 and PORTE bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | 2.3 | 3.6 | V | Operating Conditions summary | 1 | ||
| Operating temperature | -40 | 105 | ºC | Operating Conditions summary | 1 | ||
| Operating frequency | 80 | MHz | DC to 80 MHz, Operating Conditions summary | 1 | |||
| Ambient temperature under bias | -40 | 105 | ºC | 355 | |||
| Storage temperature | -65 | 150 | ºC | 355 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | with respect to VSS | 355 | |
| Voltage on any pin that is not 5V tolerant with respect to VSS (max printed as VDD + 0.3V) | -0.3 | V | Note 3; maximum printed as (VDD + 0.3V) | 355 | |||
| Voltage on any 5V tolerant pin with respect to VSS when VDD 2.3V | -0.3 | 5.5 | V | when VDD 2.3V (comparison sign not extracted); Note 3 | 355 | ||
| Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V | -0.3 | 3.6 | V | when VDD < 2.3V; Note 3 | 355 | ||
| Voltage on VBUS with respect to VSS | VBUS | -0.3 | 5.5 | V | with respect to VSS | 355 |
CAD (KiCad official)
- Symbol:
PIC32MX795F512H-80I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx795f512h-80i-etched.step/pic32mx795f512h-80i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx795f512h-80i.step/pic32mx795f512h-80i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC32MX795F512H-80I
**Microchip Tech** · Pre-ordered MCUs · TQFP-64(10x10)
PIC32MX795F512H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | Multiplexed Ethernet transmit enable, PMP data bit 5 and PORTE bit 5; I/O is a 5V-tolerant TTL/ST buffer per the pinout table. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | Multiplexed Ethernet transmit data 0, PMP data bit 6 and PORTE bit 6 I/O. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | Multiplexed Ethernet transmit data 1, PMP data bit 7 and PORTE bit 7 I/O. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | SPI2 serial clock input/output, multiplexed with UART6/UART3 and PMP address and change notice CN8 on RG6. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | I2C4 serial data input/output, multiplexed with SPI2 data in, UART3 receive and PMP address on RG7. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | I2C4 serial clock input/output, multiplexed with SPI2 data out, UART3 transmit and PMP address on RG8. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | SPI2 slave select I/O, multiplexed with UART6 receive, UART3 clear to send and PMP address on RG9. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | Analog input AN5, Comparator 1 positive input, USB VBUS on control output and PORTB bit 5. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | Analog input AN4, Comparator 1 negative input and PORTB bit 4. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | Analog input AN3, Comparator 2 positive input and PORTB bit 3. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | Analog input AN2, Comparator 2 negative input and PORTB bit 2. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | Programming/debug clock input for channel 1, analog input AN1, analog voltage reference (low) input and PORTB bit 1. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Programming/debug data I/O for channel 1, analog input AN0, analog voltage reference (high) input and PORTB bit 0. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | Programming/debug clock input for channel 2, analog input AN6, Output Compare Fault A input and PORTB bit 6. |
| 18 | PGED2/AN7/RB7 | bidirectional | Programming/debug data I/O for channel 2, analog input AN7 and PORTB bit 7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX(2)/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | Analog input AN8, CAN2 transmit (footnoted), SPI4 slave select, Comparator 1 output and PORTB bit 8. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | Analog input AN9, Comparator 2 output, PMP address bit 7 and PORTB bit 9. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | JTAG test mode select input, analog input AN10, comparator voltage reference output and PORTB bit 10. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | JTAG test data output, analog input AN11, PMP address bit 12 and PORTB bit 11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | JTAG test clock input, analog input AN12, PMP address bit 11 and PORTB bit 12. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | JTAG test data input, analog input AN13, PMP address bit 10 and PORTB bit 13. |
| 29 | AN14/C2RX(2)/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | bidirectional | Analog input AN14, CAN2 receive (footnoted), SPI4 clock, PMP address latch high and PORTB bit 14. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | Analog input AN15, Ethernet management clock, Output Compare Fault B input, PMP address latch low and PORTB bit 15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | Alternate CAN1 transmit, I2C5 serial data, SPI4 data in, UART2 receive and PORTF bit 4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | Alternate CAN1 receive, I2C5 serial clock, SPI4 data out, UART2 transmit and PORTF bit 5. |
| 33 | USBID/RF3 | input | USB OTG ID detect input and PORTF bit 3. |
| 34 | VBUS | power_in | USB bus power monitor input. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- differential data line and PORTG bit 3. |
| 37 | D+/RG2 | bidirectional | USB D+ differential data line and PORTG bit 2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input and external clock source input, also PORTC bit 12. |
| 40 | OSC2/CLKO/RC15 | output | Oscillator crystal output, optionally CLKO in RC and EC modes, and PORTC bit 15. |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | Real-Time Clock alarm output, alternate Ethernet receive data 1, Ethernet transmit data 3, input capture 1, external interrupt 1 and PORTD bit 8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | Alternate Ethernet receive data 0, Ethernet transmit data 2, SPI3 slave select, I2C1 serial data, input capture 2, external interrupt 2 and PORTD bit 9. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | Ethernet collision detect, alternate Ethernet carrier sense data valid, I2C1 serial clock, input capture 3, PMP chip select 2 and PORTD bit 10. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | Ethernet carrier sense, alternate Ethernet reference clock, input capture 4, PMP chip select 1 and PORTD bit 11. |
| 46 | OC1/INT0/RD0 | output | Output Compare output 1, external interrupt 0 and PORTD bit 0. |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input, change notice CN1 and PORTC bit 13. |
| 48 | SOSCO/T1CK/CN0/RC14 | output | 32.768 kHz low-power oscillator crystal output, Timer1 external clock input and PORTC bit 14. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | Ethernet management data I/O, alternate Ethernet management data, SPI3 clock, UART4 transmit, Output Compare 2 and PORTD bit 1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 serial data, SPI3 data in, UART1 receive, Output Compare 3 and PORTD bit 2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 serial clock, SPI3 data out, UART1 transmit, Output Compare 4 and PORTD bit 3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | Output Compare 5, input capture 5, PMP write strobe, change notice CN13 and PORTD bit 4. |
| 53 | PMRD/CN14/RD5 | bidirectional | PMP read strobe, change notice CN14 and PORTD bit 5. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | Alternate Ethernet transmit enable, Ethernet transmit error, change notice CN15 and PORTD bit 6. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | Ethernet transmit clock, alternate Ethernet receive error, change notice CN16 and PORTD bit 7. |
| 56 | VCAP | passive | Capacitor for internal voltage regulator; must not be connected to VDD and requires a low-ESR capacitor to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | bidirectional | CAN1 bus receive, alternate Ethernet transmit data 1, Ethernet receive data 3 and PORTF bit 0. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | bidirectional | CAN1 bus transmit, alternate Ethernet transmit data 0, Ethernet receive data 2 and PORTF bit 1. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | Ethernet receive data 1, PMP data bit 0 and PORTE bit 0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | Ethernet receive data 0, PMP data bit 1 and PORTE bit 1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | Ethernet receive data valid, Ethernet carrier sense data valid, PMP data bit 2 and PORTE bit 2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | Ethernet receive clock or reference clock, PMP data bit 3 and PORTE bit 3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | Ethernet receive error input, PMP data bit 4 and PORTE bit 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | | 2.3 | | 3.6 | V | Operating Conditions summary | 1 |
| Operating temperature | | -40 | | 105 | ºC | Operating Conditions summary | 1 |
| Operating frequency | | | | 80 | MHz | DC to 80 MHz, Operating Conditions summary | 1 |
| Ambient temperature under bias | | -40 | | 105 | ºC | | 355 |
| Storage temperature | | -65 | | 150 | ºC | | 355 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 4 | V | with respect to VSS | 355 |
| Voltage on any pin that is not 5V tolerant with respect to VSS (max printed as VDD + 0.3V) | | -0.3 | | | V | Note 3; maximum printed as (VDD + 0.3V) | 355 |
| Voltage on any 5V tolerant pin with respect to VSS when VDD 2.3V | | -0.3 | | 5.5 | V | when VDD 2.3V (comparison sign not extracted); Note 3 | 355 |
| Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V | | -0.3 | | 3.6 | V | when VDD < 2.3V; Note 3 | 355 |
| Voltage on VBUS with respect to VSS | VBUS | -0.3 | | 5.5 | V | with respect to VSS | 355 |
## CAD (KiCad official)
- Symbol: `PIC32MX795F512H-80I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic32mx795f512h-80i-etched.step` / `pic32mx795f512h-80i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic32mx795f512h-80i.step` / `pic32mx795f512h-80i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MX5XX6XX7XX_Family)Datasheet_DS60001156K.pdf) (446 pp, sha256 `2413ac5834b12306`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic32mx795f512h-80i-datasheet.pdf)