component
PIC32MX775F256H-80I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
bb57757
PIC32MX775F256H-80I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX775F256H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | output | Ethernet transmit enable output, shared with PMP data PMD5 and PORTE bidirectional I/O pin RE5 (ST buffer). |
| 2 | ETXD0/PMD6/RE6 | output | Ethernet transmit data bit 0 output, shared with PMP data PMD6 and PORTE bidirectional I/O pin RE6 (ST buffer). |
| 3 | ETXD1/PMD7/RE7 | output | Ethernet transmit data bit 1 output, shared with PMP data PMD7 and PORTE bidirectional I/O pin RE7 (ST buffer). |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | SPI2 synchronous serial clock input/output, shared with UART6 TX, UART3 RTS, PMP address PMA5, change notice CN8 and PORTG pin RG6. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | I2C4 synchronous serial data input/output, shared with SPI2 data in SDI2, UART3 RX, PMP address PMA4, change notice CN9 and PORTG pin RG7. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | I2C4 synchronous serial clock input/output, shared with SPI2 data out SDO2, UART3 TX, PMP address PMA3, change notice CN10 and PORTG pin RG8. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | SPI2 slave synchronization or frame pulse I/O, shared with UART6 RX, UART3 CTS, PMP address PMA2, change notice CN11 and PORTG pin RG9. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | input | Analog input channel AN5, also Comparator 1 positive input C1IN+, USB host/OTG VBUSON control output, change notice CN7 and PORTB pin RB5. |
| 12 | AN4/C1IN-/CN6/RB4 | input | Analog input channel AN4, also Comparator 1 negative input C1IN-, change notice CN6 and PORTB pin RB4 (ST buffer). |
| 13 | AN3/C2IN+/CN5/RB3 | input | Analog input channel AN3, also Comparator 2 positive input C2IN+, change notice CN5 and PORTB pin RB3 (ST buffer). |
| 14 | AN2/C2IN-/CN4/RB2 | input | Analog input channel AN2, also Comparator 2 negative input C2IN-, change notice CN4 and PORTB pin RB2 (ST buffer). |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | input | Clock input pin for programming/debugging communication channel 1, also analog input AN1 and analog voltage reference (low) VREF- / CVREF-. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Data I/O pin for programming/debugging communication channel 1, also analog input AN0 and analog voltage reference (high) VREF+ / CVREF+. |
| 17 | PGEC2/AN6/OCFA/RB6 | input | Clock input pin for programming/debugging communication channel 2, also analog input AN6 and Output Compare Fault A input OCFA. |
| 18 | PGED2/AN7/RB7 | bidirectional | Data I/O pin for programming/debugging communication channel 2, also analog input AN7 and PORTB pin RB7 (ST buffer). |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX/SS4/U5RX/U2CTS/C1OUT/RB8 | input | Analog input channel AN8, also CAN2 transmit C2TX, Comparator 1 output C1OUT, SPI4 slave select SS4, UART5 RX, UART2 CTS and PORTB pin RB8. |
| 22 | AN9/C2OUT/PMA7/RB9 | input | Analog input channel AN9, also Comparator 2 output C2OUT, PMP address PMA7 and PORTB pin RB9 (ST buffer). |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | input | JTAG test mode select input, also analog input AN10, comparator voltage reference output CVREFOUT, PMP address PMA13 and PORTB pin RB10. |
| 24 | TDO/AN11/PMA12/RB11 | output | JTAG test data output, also analog input AN11, PMP address PMA12 and PORTB pin RB11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | input | JTAG test clock input pin, also analog input AN12, PMP address PMA11 and PORTB pin RB12. |
| 28 | TDI/AN13/PMA10/RB13 | input | JTAG test data input pin, also analog input AN13, PMP address PMA10 and PORTB pin RB13. |
| 29 | AN14/C2RX/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | input | Analog input channel AN14, also CAN2 receive C2RX, SPI4 clock SCK4, UART5 TX, UART2 RTS, PMP address latch high PMALH, PMA1 and PORTB pin RB14. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | input | Analog input channel AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB, PMP address latch low PMALL and PORTB pin RB15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | output | Alternate CAN1 bus transmit pin, also I2C5 data SDA5, SPI4 data in SDI4, UART2 RX, PMP address PMA9, change notice CN17 and PORTF pin RF4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | input | Alternate CAN1 bus receive pin, also I2C5 clock SCL5, SPI4 data out SDO4, UART2 TX, PMP address PMA8, change notice CN18 and PORTF pin RF5. |
| 33 | USBID/RF3 | input | USB OTG ID detect input, also PORTF bidirectional I/O pin RF3 (ST buffer). |
| 34 | VBUS | power_in | USB bus power monitor analog input. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- data line (analog I/O), also PORTG input pin RG3 (ST buffer). |
| 37 | D+/RG2 | bidirectional | USB D+ data line (analog I/O), also PORTG input pin RG2 (ST buffer). |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) and external clock source input CLKI, also PORTC pin RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output connecting to a crystal or resonator in crystal mode, optionally CLKO in RC and EC modes, also PORTC pin RC15 (ST buffer). |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | output | Real-Time Clock alarm output, also alternate Ethernet receive data AERXD1, Ethernet transmit data ETXD3, Input Capture 1, external interrupt INT1 and PORTD pin RD8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | input | Alternate Ethernet receive data bit 0 (ST buffer), also Ethernet transmit data ETXD2, SPI3 slave select SS3, UART4 RX, UART1 CTS, I2C1 data SDA1, Input Capture 2, external interrupt INT2 and PORTD pin RD9. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | input | Ethernet collision detect input (ST buffer), also alternate Ethernet carrier sense data valid, I2C1 clock SCL1, Input Capture 3, PMP chip select 2, PMP address PMA15, external interrupt INT3 and PORTD pin RD10. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | input | Ethernet carrier sense input (ST buffer), also alternate Ethernet reference clock, Input Capture 4, PMP chip select 1, PMP address PMA14, external interrupt INT4 and PORTD pin RD11. |
| 46 | OC1/INT0/RD0 | output | Output Compare 1 output, also external interrupt INT0 and PORTD bidirectional I/O pin RD0 (ST buffer). |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input (CMOS otherwise), also change notice CN1 and PORTC pin RC13 (ST buffer). |
| 48 | SOSCO/T1CK/CN0/RC14 | output | 32.768 kHz low-power oscillator crystal output, also Timer1 external clock input T1CK, change notice CN0 and PORTC pin RC14 (ST buffer). |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | Ethernet management data input/output, also alternate Ethernet management data, SPI3 clock SCK3, UART4 TX, UART1 RTS, Output Compare 2 output and PORTD pin RD1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 synchronous serial data input/output, also SPI3 data in SDI3, UART1 RX, Output Compare 3 output and PORTD pin RD2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 synchronous serial clock input/output, also SPI3 data out SDO3, UART1 TX, Output Compare 4 output and PORTD pin RD3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | output | Output Compare 5 output, also Input Capture 5, PMP write strobe PMWR, change notice CN13 and PORTD pin RD4. |
| 53 | PMRD/CN14/RD5 | output | Parallel Master Port read strobe, also change notice CN14 and PORTD pin RD5 (ST buffer). |
| 54 | AETXEN/ETXERR/CN15/RD6 | output | Alternate Ethernet transmit enable output, also Ethernet transmit error ETXERR, change notice CN15 and PORTD pin RD6 (ST buffer). |
| 55 | ETXCLK/AERXERR/CN16/RD7 | input | Ethernet transmit clock input (ST buffer), also alternate Ethernet receive error AERXERR, change notice CN16 and PORTD pin RD7. |
| 56 | VCAP | power_in | Capacitor for the internal voltage regulator; it must not be connected to VDD and must have a CEFC capacitor of at least 6V rating connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | input | CAN1 bus receive pin (ST buffer), also alternate Ethernet transmit data AETXD1, Ethernet receive data ERXD3 and PORTF pin RF0. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | output | CAN1 bus transmit pin, also alternate Ethernet transmit data AETXD0, Ethernet receive data ERXD2 and PORTF pin RF1. |
| 60 | ERXD1/PMD0/RE0 | input | Ethernet receive data bit 1 (ST buffer), also PMP data PMD0 and PORTE pin RE0. |
| 61 | ERXD0/PMD1/RE1 | input | Ethernet receive data bit 0 (ST buffer), also PMP data PMD1 and PORTE pin RE1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | input | Ethernet receive data valid input (ST buffer), also carrier sense data valid ECRSDV, PMP data PMD2 and PORTE pin RE2. |
| 63 | ERXCLK/EREFCLKPMD3/RE3 | input | Ethernet receive clock input (ST buffer), also Ethernet reference clock EREFCLK, PMP data PMD3 and PORTE pin RE3. |
| 64 | ERXERR/PMD4/RE4 | input | Ethernet receive error input (ST buffer), also PMP data PMD4 and PORTE pin RE4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage | 2.3 | 3.6 | V | 1 | |||
| Operating ambient temperature | -40 | 105 | ºC | 1 | |||
| Operating frequency | 80 | MHz | 1 | ||||
| CEFC capacitor on VCAP rated voltage | CEFC | 6 | V | CEFC capacitor connected to ground, at least 6V rating | 38 | ||
| VCAP external capacitor value | 10 | µF | Tantalum or ceramic, VCAP to ground (Figure 2-2) | 38 | |||
| Bulk capacitor value | 4.7 | 47 | µF | Recommended bulk capacitor range | 38 | ||
| Decoupling capacitor value (VDD/VSS, AVDD/AVSS) | 0.1 | µF | Ceramic, low-ESR, recommended | 37 | |||
| Decoupling capacitor voltage rating | 10 | 20 | V | Recommended decoupling capacitor rating | 37 | ||
| Dynamic current | 0.5 | mA/MHz | Typical, as stated in feature list | 1 | |||
| Idle/power-down current | IPD | 41 | µA | Typical, as stated in feature list | 1 |
CAD (KiCad official)
- Symbol:
PIC32MX775F256H-80I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx775f256h-80i-pt-etched.step/pic32mx775f256h-80i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx775f256h-80i-pt.step/pic32mx775f256h-80i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC32MX775F256H-80I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX775F256H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | output | Ethernet transmit enable output, shared with PMP data PMD5 and PORTE bidirectional I/O pin RE5 (ST buffer). |
| 2 | ETXD0/PMD6/RE6 | output | Ethernet transmit data bit 0 output, shared with PMP data PMD6 and PORTE bidirectional I/O pin RE6 (ST buffer). |
| 3 | ETXD1/PMD7/RE7 | output | Ethernet transmit data bit 1 output, shared with PMP data PMD7 and PORTE bidirectional I/O pin RE7 (ST buffer). |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | SPI2 synchronous serial clock input/output, shared with UART6 TX, UART3 RTS, PMP address PMA5, change notice CN8 and PORTG pin RG6. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | I2C4 synchronous serial data input/output, shared with SPI2 data in SDI2, UART3 RX, PMP address PMA4, change notice CN9 and PORTG pin RG7. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | I2C4 synchronous serial clock input/output, shared with SPI2 data out SDO2, UART3 TX, PMP address PMA3, change notice CN10 and PORTG pin RG8. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | SPI2 slave synchronization or frame pulse I/O, shared with UART6 RX, UART3 CTS, PMP address PMA2, change notice CN11 and PORTG pin RG9. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | input | Analog input channel AN5, also Comparator 1 positive input C1IN+, USB host/OTG VBUSON control output, change notice CN7 and PORTB pin RB5. |
| 12 | AN4/C1IN-/CN6/RB4 | input | Analog input channel AN4, also Comparator 1 negative input C1IN-, change notice CN6 and PORTB pin RB4 (ST buffer). |
| 13 | AN3/C2IN+/CN5/RB3 | input | Analog input channel AN3, also Comparator 2 positive input C2IN+, change notice CN5 and PORTB pin RB3 (ST buffer). |
| 14 | AN2/C2IN-/CN4/RB2 | input | Analog input channel AN2, also Comparator 2 negative input C2IN-, change notice CN4 and PORTB pin RB2 (ST buffer). |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | input | Clock input pin for programming/debugging communication channel 1, also analog input AN1 and analog voltage reference (low) VREF- / CVREF-. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Data I/O pin for programming/debugging communication channel 1, also analog input AN0 and analog voltage reference (high) VREF+ / CVREF+. |
| 17 | PGEC2/AN6/OCFA/RB6 | input | Clock input pin for programming/debugging communication channel 2, also analog input AN6 and Output Compare Fault A input OCFA. |
| 18 | PGED2/AN7/RB7 | bidirectional | Data I/O pin for programming/debugging communication channel 2, also analog input AN7 and PORTB pin RB7 (ST buffer). |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX/SS4/U5RX/U2CTS/C1OUT/RB8 | input | Analog input channel AN8, also CAN2 transmit C2TX, Comparator 1 output C1OUT, SPI4 slave select SS4, UART5 RX, UART2 CTS and PORTB pin RB8. |
| 22 | AN9/C2OUT/PMA7/RB9 | input | Analog input channel AN9, also Comparator 2 output C2OUT, PMP address PMA7 and PORTB pin RB9 (ST buffer). |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | input | JTAG test mode select input, also analog input AN10, comparator voltage reference output CVREFOUT, PMP address PMA13 and PORTB pin RB10. |
| 24 | TDO/AN11/PMA12/RB11 | output | JTAG test data output, also analog input AN11, PMP address PMA12 and PORTB pin RB11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | input | JTAG test clock input pin, also analog input AN12, PMP address PMA11 and PORTB pin RB12. |
| 28 | TDI/AN13/PMA10/RB13 | input | JTAG test data input pin, also analog input AN13, PMP address PMA10 and PORTB pin RB13. |
| 29 | AN14/C2RX/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | input | Analog input channel AN14, also CAN2 receive C2RX, SPI4 clock SCK4, UART5 TX, UART2 RTS, PMP address latch high PMALH, PMA1 and PORTB pin RB14. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | input | Analog input channel AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB, PMP address latch low PMALL and PORTB pin RB15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | output | Alternate CAN1 bus transmit pin, also I2C5 data SDA5, SPI4 data in SDI4, UART2 RX, PMP address PMA9, change notice CN17 and PORTF pin RF4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | input | Alternate CAN1 bus receive pin, also I2C5 clock SCL5, SPI4 data out SDO4, UART2 TX, PMP address PMA8, change notice CN18 and PORTF pin RF5. |
| 33 | USBID/RF3 | input | USB OTG ID detect input, also PORTF bidirectional I/O pin RF3 (ST buffer). |
| 34 | VBUS | power_in | USB bus power monitor analog input. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- data line (analog I/O), also PORTG input pin RG3 (ST buffer). |
| 37 | D+/RG2 | bidirectional | USB D+ data line (analog I/O), also PORTG input pin RG2 (ST buffer). |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) and external clock source input CLKI, also PORTC pin RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output connecting to a crystal or resonator in crystal mode, optionally CLKO in RC and EC modes, also PORTC pin RC15 (ST buffer). |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | output | Real-Time Clock alarm output, also alternate Ethernet receive data AERXD1, Ethernet transmit data ETXD3, Input Capture 1, external interrupt INT1 and PORTD pin RD8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | input | Alternate Ethernet receive data bit 0 (ST buffer), also Ethernet transmit data ETXD2, SPI3 slave select SS3, UART4 RX, UART1 CTS, I2C1 data SDA1, Input Capture 2, external interrupt INT2 and PORTD pin RD9. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | input | Ethernet collision detect input (ST buffer), also alternate Ethernet carrier sense data valid, I2C1 clock SCL1, Input Capture 3, PMP chip select 2, PMP address PMA15, external interrupt INT3 and PORTD pin RD10. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | input | Ethernet carrier sense input (ST buffer), also alternate Ethernet reference clock, Input Capture 4, PMP chip select 1, PMP address PMA14, external interrupt INT4 and PORTD pin RD11. |
| 46 | OC1/INT0/RD0 | output | Output Compare 1 output, also external interrupt INT0 and PORTD bidirectional I/O pin RD0 (ST buffer). |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input (CMOS otherwise), also change notice CN1 and PORTC pin RC13 (ST buffer). |
| 48 | SOSCO/T1CK/CN0/RC14 | output | 32.768 kHz low-power oscillator crystal output, also Timer1 external clock input T1CK, change notice CN0 and PORTC pin RC14 (ST buffer). |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | Ethernet management data input/output, also alternate Ethernet management data, SPI3 clock SCK3, UART4 TX, UART1 RTS, Output Compare 2 output and PORTD pin RD1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 synchronous serial data input/output, also SPI3 data in SDI3, UART1 RX, Output Compare 3 output and PORTD pin RD2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 synchronous serial clock input/output, also SPI3 data out SDO3, UART1 TX, Output Compare 4 output and PORTD pin RD3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | output | Output Compare 5 output, also Input Capture 5, PMP write strobe PMWR, change notice CN13 and PORTD pin RD4. |
| 53 | PMRD/CN14/RD5 | output | Parallel Master Port read strobe, also change notice CN14 and PORTD pin RD5 (ST buffer). |
| 54 | AETXEN/ETXERR/CN15/RD6 | output | Alternate Ethernet transmit enable output, also Ethernet transmit error ETXERR, change notice CN15 and PORTD pin RD6 (ST buffer). |
| 55 | ETXCLK/AERXERR/CN16/RD7 | input | Ethernet transmit clock input (ST buffer), also alternate Ethernet receive error AERXERR, change notice CN16 and PORTD pin RD7. |
| 56 | VCAP | power_in | Capacitor for the internal voltage regulator; it must not be connected to VDD and must have a CEFC capacitor of at least 6V rating connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | input | CAN1 bus receive pin (ST buffer), also alternate Ethernet transmit data AETXD1, Ethernet receive data ERXD3 and PORTF pin RF0. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | output | CAN1 bus transmit pin, also alternate Ethernet transmit data AETXD0, Ethernet receive data ERXD2 and PORTF pin RF1. |
| 60 | ERXD1/PMD0/RE0 | input | Ethernet receive data bit 1 (ST buffer), also PMP data PMD0 and PORTE pin RE0. |
| 61 | ERXD0/PMD1/RE1 | input | Ethernet receive data bit 0 (ST buffer), also PMP data PMD1 and PORTE pin RE1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | input | Ethernet receive data valid input (ST buffer), also carrier sense data valid ECRSDV, PMP data PMD2 and PORTE pin RE2. |
| 63 | ERXCLK/EREFCLKPMD3/RE3 | input | Ethernet receive clock input (ST buffer), also Ethernet reference clock EREFCLK, PMP data PMD3 and PORTE pin RE3. |
| 64 | ERXERR/PMD4/RE4 | input | Ethernet receive error input (ST buffer), also PMP data PMD4 and PORTE pin RE4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage | | 2.3 | | 3.6 | V | | 1 |
| Operating ambient temperature | | -40 | | 105 | ºC | | 1 |
| Operating frequency | | | | 80 | MHz | | 1 |
| CEFC capacitor on VCAP rated voltage | CEFC | 6 | | | V | CEFC capacitor connected to ground, at least 6V rating | 38 |
| VCAP external capacitor value | | | 10 | | µF | Tantalum or ceramic, VCAP to ground (Figure 2-2) | 38 |
| Bulk capacitor value | | 4.7 | | 47 | µF | Recommended bulk capacitor range | 38 |
| Decoupling capacitor value (VDD/VSS, AVDD/AVSS) | | | 0.1 | | µF | Ceramic, low-ESR, recommended | 37 |
| Decoupling capacitor voltage rating | | 10 | | 20 | V | Recommended decoupling capacitor rating | 37 |
| Dynamic current | | | 0.5 | | mA/MHz | Typical, as stated in feature list | 1 |
| Idle/power-down current | IPD | | 41 | | µA | Typical, as stated in feature list | 1 |
## CAD (KiCad official)
- Symbol: `PIC32MX775F256H-80I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic32mx775f256h-80i-pt-etched.step` / `pic32mx775f256h-80i-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic32mx775f256h-80i-pt.step` / `pic32mx775f256h-80i-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC32MX5XX6XX7XX_Family)Datasheet_DS60001156K.pdf) (446 pp, sha256 `2413ac5834b12306`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic32mx775f256h-80i-pt-datasheet.pdf)