main
Ray
Publish 0.1.0
0fbb129
PIC32MX675F512HT-80I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX675F512HT-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit enable and Parallel Master Port data. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit data bit 0 and Parallel Master Port data. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit data bit 1 and Parallel Master Port data. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with SPI2 clock, UART6 transmit and change notification input CN8. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with I2C4 data, SPI2 data input and UART3 receive. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with I2C4 clock, SPI2 data output and UART3 transmit. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with SPI2 slave select, UART6 receive and UART3 clear to send. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN5, Comparator 1 positive input and USB VBUSON output. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN4, Comparator 1 negative input and change notification input CN6. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN3, Comparator 2 positive input and change notification input CN5. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN2, Comparator 2 negative input and change notification input CN4. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming clock for channel 1 (PGEC1), analog input AN1 and the analog voltage reference VREF- input. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming data for channel 1 (PGED1), analog input AN0 and the analog voltage reference VREF+ input. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming clock for channel 2 (PGEC2), analog input AN6 and Output Compare Fault A input. |
| 18 | PGED2/AN7/RB7 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming data for channel 2 (PGED2) and analog input AN7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN8, SPI4 slave select, UART5 receive and Comparator 1 output C1OUT. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN9, Comparator 2 output C2OUT and Parallel Master Port address bit 7. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test mode select (TMS), analog input AN10, the CVREF output and Parallel Master Port address bit 13. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test data output (TDO), analog input AN11 and Parallel Master Port address bit 12. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test clock input (TCK), analog input AN12 and Parallel Master Port address bit 11. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test data input (TDI), analog input AN13 and Parallel Master Port address bit 10. |
| 29 | AN14/SCK4/U5TX/U2RTSU2RTS/PMALH/PMA1/RB14 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN14, SPI4 clock, UART5 transmit and Parallel Master Port address latch enable high byte (PMALH). |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN15, Ethernet management clock EMDC, Output Compare Fault B input and Parallel Master Port address latch enable low byte (PMALL). |
| 31 | SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with I2C5 data, SPI4 data input and UART2 receive. |
| 32 | SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with I2C5 clock, SPI4 data output and UART2 transmit. |
| 33 | USBID/RF3 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with the USB OTG ID detect input (USBID). |
| 34 | VBUS | power_in | USB bus power monitor input (analog). |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- data line (analog I/O) that is multiplexed with PORTG bit RG3. |
| 37 | D+/RG2 | bidirectional | USB D+ data line (analog I/O) that is multiplexed with PORTG bit RG2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) that is also the external clock source input CLKI. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output that connects to a crystal or resonator in Crystal Oscillator mode and optionally functions as CLKO in RC and EC modes. |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with the Real-Time Clock alarm output RTCC, Input Capture 1, external interrupt 1 and Ethernet transmit data bit 3. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with SPI3 slave select, UART4 receive, I2C1 data, Input Capture 2 and external interrupt 2. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with Ethernet collision detect, I2C1 clock, Input Capture 3, Parallel Master Port chip select 2 and external interrupt 3. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with Ethernet carrier sense, Input Capture 4, Parallel Master Port chip select 1 and external interrupt 4. |
| 46 | OC1/INT0/RD0 | bidirectional | PORTD bidirectional I/O that is multiplexed with Output Compare output 1 (OC1) and external interrupt 0 (INT0). |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input (ST buffer) that is also PORTC bit RC13 and change notification input CN1. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | 32.768 kHz low-power oscillator crystal output that is also PORTC bit RC14, Timer1 external clock input T1CK and change notification input CN0. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | PORTD bidirectional I/O that is multiplexed with Ethernet management data EMDIO, SPI3 clock, UART4 transmit and Output Compare output 2. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | PORTD bidirectional I/O that is multiplexed with I2C3 data, SPI3 data input, UART1 receive and Output Compare output 3. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | PORTD bidirectional I/O that is multiplexed with I2C3 clock, SPI3 data output, UART1 transmit and Output Compare output 4. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | PORTD bidirectional I/O that is multiplexed with Output Compare output 5, Input Capture 5, Parallel Master Port write strobe and change notification input CN13. |
| 53 | PMRD/CN14/RD5 | bidirectional | PORTD bidirectional I/O that is multiplexed with the Parallel Master Port read strobe (PMRD) and change notification input CN14. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | PORTD bidirectional I/O that is multiplexed with alternate Ethernet transmit enable, Ethernet transmit error and change notification input CN15. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | PORTD bidirectional I/O that is multiplexed with Ethernet transmit clock, alternate Ethernet receive error and change notification input CN16. |
| 56 | VCAP | passive | Capacitor for the internal voltage regulator; the VCAP pin must not be connected to VDD and must have a CEFC capacitor with at least a 6V rating connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | AETXD1/ERXD3/RF0 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with alternate Ethernet transmit data bit 1 and Ethernet receive data bit 3. |
| 59 | AETXD0/ERXD2/RF1 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with alternate Ethernet transmit data bit 0 and Ethernet receive data bit 2. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data bit 1 and Parallel Master Port data bit 0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data bit 0 and Parallel Master Port data bit 1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data valid, Ethernet carrier sense data valid and Parallel Master Port data bit 2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive clock, Ethernet reference clock and Parallel Master Port data bit 3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive error input and Parallel Master Port data bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.3 | 3.6 | V | 357 | ||
| RAM Data Retention Voltage | VDR | 1.75 | V | 357 | |||
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 1.75 | 2.1 | V | 357 | ||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 5e-05 | 0.115 | V/s | 357 | ||
| Operating Junction Temperature Range (Industrial) | TJ | -40 | 125 | °C | Industrial Temperature Devices | 356 | |
| Operating Ambient Temperature Range (Industrial) | TA | -40 | 85 | °C | Industrial Temperature Devices | 356 | |
| Maximum Frequency | 80 | MHz | VDD 2.3-3.6V, -40°C to +85°C (DC5) | 356 | |||
| Ambient temperature under bias | -40 | 105 | °C | 355 | |||
| Storage temperature | -65 | 150 | °C | 355 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 355 | ||
| Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 2.3V | -0.3 | 5.5 | V | when VDD ≥ 2.3V | 355 | ||
| Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V | -0.3 | 3.6 | V | when VDD < 2.3V | 355 | ||
| Voltage on VBUS with respect to VSS | -0.3 | 5.5 | V | 355 | |||
| Package Thermal Resistance, 64-Pin TQFP (10x10x1 mm) | JA | 47 | °C/W | Junction to ambient, package simulation | 356 |
CAD (KiCad official)
- Symbol:
PIC32MX675F512HT-80I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx675f512ht-80i-etched.step/pic32mx675f512ht-80i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx675f512ht-80i.step/pic32mx675f512ht-80i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (446 pp, sha256
7c0e89419ff7a456, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC32MX675F512HT-80I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX675F512HT-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit enable and Parallel Master Port data. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit data bit 0 and Parallel Master Port data. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet transmit data bit 1 and Parallel Master Port data. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with SPI2 clock, UART6 transmit and change notification input CN8. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with I2C4 data, SPI2 data input and UART3 receive. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with I2C4 clock, SPI2 data output and UART3 transmit. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG bidirectional I/O (ST buffer) that is multiplexed with SPI2 slave select, UART6 receive and UART3 clear to send. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN5, Comparator 1 positive input and USB VBUSON output. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN4, Comparator 1 negative input and change notification input CN6. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN3, Comparator 2 positive input and change notification input CN5. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN2, Comparator 2 negative input and change notification input CN4. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming clock for channel 1 (PGEC1), analog input AN1 and the analog voltage reference VREF- input. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming data for channel 1 (PGED1), analog input AN0 and the analog voltage reference VREF+ input. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming clock for channel 2 (PGEC2), analog input AN6 and Output Compare Fault A input. |
| 18 | PGED2/AN7/RB7 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with the programming data for channel 2 (PGED2) and analog input AN7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN8, SPI4 slave select, UART5 receive and Comparator 1 output C1OUT. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN9, Comparator 2 output C2OUT and Parallel Master Port address bit 7. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test mode select (TMS), analog input AN10, the CVREF output and Parallel Master Port address bit 13. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test data output (TDO), analog input AN11 and Parallel Master Port address bit 12. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test clock input (TCK), analog input AN12 and Parallel Master Port address bit 11. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with JTAG test data input (TDI), analog input AN13 and Parallel Master Port address bit 10. |
| 29 | AN14/SCK4/U5TX/U2RTSU2RTS/PMALH/PMA1/RB14 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN14, SPI4 clock, UART5 transmit and Parallel Master Port address latch enable high byte (PMALH). |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | PORTB bidirectional I/O (ST buffer) that is multiplexed with analog input AN15, Ethernet management clock EMDC, Output Compare Fault B input and Parallel Master Port address latch enable low byte (PMALL). |
| 31 | SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with I2C5 data, SPI4 data input and UART2 receive. |
| 32 | SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with I2C5 clock, SPI4 data output and UART2 transmit. |
| 33 | USBID/RF3 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with the USB OTG ID detect input (USBID). |
| 34 | VBUS | power_in | USB bus power monitor input (analog). |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- data line (analog I/O) that is multiplexed with PORTG bit RG3. |
| 37 | D+/RG2 | bidirectional | USB D+ data line (analog I/O) that is multiplexed with PORTG bit RG2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) that is also the external clock source input CLKI. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output that connects to a crystal or resonator in Crystal Oscillator mode and optionally functions as CLKO in RC and EC modes. |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with the Real-Time Clock alarm output RTCC, Input Capture 1, external interrupt 1 and Ethernet transmit data bit 3. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with SPI3 slave select, UART4 receive, I2C1 data, Input Capture 2 and external interrupt 2. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with Ethernet collision detect, I2C1 clock, Input Capture 3, Parallel Master Port chip select 2 and external interrupt 3. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | PORTD bidirectional I/O (ST buffer) that is multiplexed with Ethernet carrier sense, Input Capture 4, Parallel Master Port chip select 1 and external interrupt 4. |
| 46 | OC1/INT0/RD0 | bidirectional | PORTD bidirectional I/O that is multiplexed with Output Compare output 1 (OC1) and external interrupt 0 (INT0). |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input (ST buffer) that is also PORTC bit RC13 and change notification input CN1. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | 32.768 kHz low-power oscillator crystal output that is also PORTC bit RC14, Timer1 external clock input T1CK and change notification input CN0. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | PORTD bidirectional I/O that is multiplexed with Ethernet management data EMDIO, SPI3 clock, UART4 transmit and Output Compare output 2. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | PORTD bidirectional I/O that is multiplexed with I2C3 data, SPI3 data input, UART1 receive and Output Compare output 3. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | PORTD bidirectional I/O that is multiplexed with I2C3 clock, SPI3 data output, UART1 transmit and Output Compare output 4. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | PORTD bidirectional I/O that is multiplexed with Output Compare output 5, Input Capture 5, Parallel Master Port write strobe and change notification input CN13. |
| 53 | PMRD/CN14/RD5 | bidirectional | PORTD bidirectional I/O that is multiplexed with the Parallel Master Port read strobe (PMRD) and change notification input CN14. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | PORTD bidirectional I/O that is multiplexed with alternate Ethernet transmit enable, Ethernet transmit error and change notification input CN15. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | PORTD bidirectional I/O that is multiplexed with Ethernet transmit clock, alternate Ethernet receive error and change notification input CN16. |
| 56 | VCAP | passive | Capacitor for the internal voltage regulator; the VCAP pin must not be connected to VDD and must have a CEFC capacitor with at least a 6V rating connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | AETXD1/ERXD3/RF0 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with alternate Ethernet transmit data bit 1 and Ethernet receive data bit 3. |
| 59 | AETXD0/ERXD2/RF1 | bidirectional | PORTF bidirectional I/O (ST buffer) that is multiplexed with alternate Ethernet transmit data bit 0 and Ethernet receive data bit 2. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data bit 1 and Parallel Master Port data bit 0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data bit 0 and Parallel Master Port data bit 1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive data valid, Ethernet carrier sense data valid and Parallel Master Port data bit 2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive clock, Ethernet reference clock and Parallel Master Port data bit 3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | PORTE bidirectional I/O (TTL/ST buffer) that is multiplexed with Ethernet receive error input and Parallel Master Port data bit 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.3 | | 3.6 | V | | 357 |
| RAM Data Retention Voltage | VDR | 1.75 | | | V | | 357 |
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 1.75 | | 2.1 | V | | 357 |
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 5e-05 | | 0.115 | V/s | | 357 |
| Operating Junction Temperature Range (Industrial) | TJ | -40 | | 125 | °C | Industrial Temperature Devices | 356 |
| Operating Ambient Temperature Range (Industrial) | TA | -40 | | 85 | °C | Industrial Temperature Devices | 356 |
| Maximum Frequency | | | | 80 | MHz | VDD 2.3-3.6V, -40°C to +85°C (DC5) | 356 |
| Ambient temperature under bias | | -40 | | 105 | °C | | 355 |
| Storage temperature | | -65 | | 150 | °C | | 355 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 4 | V | | 355 |
| Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 2.3V | | -0.3 | | 5.5 | V | when VDD ≥ 2.3V | 355 |
| Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V | | -0.3 | | 3.6 | V | when VDD < 2.3V | 355 |
| Voltage on VBUS with respect to VSS | | -0.3 | | 5.5 | V | | 355 |
| Package Thermal Resistance, 64-Pin TQFP (10x10x1 mm) | JA | | 47 | | °C/W | Junction to ambient, package simulation | 356 |
## CAD (KiCad official)
- Symbol: `PIC32MX675F512HT-80I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic32mx675f512ht-80i-etched.step` / `pic32mx675f512ht-80i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic32mx675f512ht-80i.step` / `pic32mx675f512ht-80i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic32mx675f512ht-80i-datasheet.pdf) (446 pp, sha256 `7c0e89419ff7a456`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic32mx675f512ht-80i-datasheet.pdf)