component
PIC32MX564F064H-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC32MX564F064H-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX564F064H-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PMD5/RE5 | bidirectional | PORTE bidirectional I/O pin RE5 with TTL/ST input buffer, also Parallel Master Port data bit PMD5. |
| 2 | PMD6/RE6 | bidirectional | PORTE bidirectional I/O pin RE6 with TTL/ST input buffer, also Parallel Master Port data bit PMD6. |
| 3 | PMD7/RE7 | bidirectional | PORTE bidirectional I/O pin RE7 with TTL/ST input buffer, also Parallel Master Port data bit PMD7. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG bidirectional I/O pin RG6 with ST input buffer, also SPI2 serial clock SCK2, UART6 TX, UART3 RTS, PMP address PMA5 and change notification CN8. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG bidirectional I/O pin RG7 with ST input buffer, also I2C4 serial data SDA4, SPI2 data in SDI2, UART3 RX, PMP address PMA4 and CN9. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG bidirectional I/O pin RG8 with ST input buffer, also I2C4 serial clock SCL4, SPI2 data out SDO2, UART3 TX, PMP address PMA3 and CN10. |
| 7 | MCLR | input | Active-low Master Clear (Reset) input; pulling it low generates a device Reset. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG bidirectional I/O pin RG9 with ST input buffer, also SPI2 slave select SS2, UART6 RX, UART3 CTS, PMP address PMA2 and CN11. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | input | Analog input channel AN5, also comparator 1 positive input C1IN+; the pin also carries the VBUSON USB host/OTG bus power control output and PORTB pin RB5. |
| 12 | AN4/C1IN-/CN6/RB4 | input | Analog input channel AN4, also comparator 1 negative input C1IN-; the pin also carries PORTB I/O pin RB4 with ST input buffer. |
| 13 | AN3/C2IN+/CN5/RB3 | input | Analog input channel AN3, also comparator 2 positive input C2IN+; the pin also carries PORTB I/O pin RB3 with ST input buffer. |
| 14 | AN2/C2IN-/CN4/RB2 | input | Analog input channel AN2, also comparator 2 negative input C2IN-; the pin also carries PORTB I/O pin RB2 with ST input buffer. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | input | Clock input pin for ICSP/debug Communication Channel 1; the pin also serves analog input AN1, analog voltage reference (low) input VREF- and CVREF-, and PORTB pin RB1. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Data I/O pin for ICSP/debug Communication Channel 1; the pin also serves analog input AN0, analog voltage reference (high) input VREF+ and CVREF+, PMP address PMA6 and PORTB pin RB0. |
| 17 | PGEC2/AN6/OCFA/RB6 | input | Clock input pin for ICSP/debug Communication Channel 2; the pin also serves analog input AN6, Output Compare Fault A input OCFA and PORTB pin RB6. |
| 18 | PGED2/AN7/RB7 | bidirectional | Data I/O pin for ICSP/debug Communication Channel 2; the pin also serves analog input AN7 and PORTB I/O pin RB7 with ST input buffer. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times, even if the ADC is not used. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times, even if the ADC is not used. |
| 21 | AN8/SS4/U5RX/U2CTS/C1OUT/RB8 | input | Analog input channel AN8, also comparator 1 output C1OUT; the pin also carries SPI4 slave select, UART5 RX, UART2 CTS and PORTB I/O pin RB8. |
| 22 | AN9/C2OUT/PMA7/RB9 | input | Analog input channel AN9, also comparator 2 output C2OUT; the pin also carries Parallel Master Port address PMA7 and PORTB I/O pin RB9. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | input | JTAG test mode select input with ST buffer; the pin also serves analog input AN10, comparator voltage reference output CVREFOUT, PMP address PMA13 and PORTB pin RB10. |
| 24 | TDO/AN11/PMA12/RB11 | output | JTAG test data output; the pin also serves analog input AN11, PMP address PMA12 and PORTB pin RB11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | input | JTAG test clock input with ST buffer; the pin also serves analog input AN12, PMP address PMA11 and PORTB pin RB12. |
| 28 | TDI/AN13/PMA10/RB13 | input | JTAG test data input with ST buffer; the pin also serves analog input AN13, PMP address PMA10 and PORTB pin RB13. |
| 29 | AN14/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | input | Analog input channel AN14; the pin also carries SPI4 serial clock, UART5 TX, UART2 RTS, PMP address latch enable high PMALH, PMA1 and PORTB pin RB14. |
| 30 | AN15/OCFB/PMALL/PMA0/CN12/RB15 | input | Analog input channel AN15; the pin also carries Output Compare Fault B input OCFB, PMP address latch enable low PMALL, PMA0, change notification CN12 and PORTB pin RB15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | output | Alternate CAN1 bus transmit output; the pin also carries I2C5 serial data SDA5, SPI4 data in SDI4, UART2 RX, PMP address PMA9, CN17 and PORTF pin RF4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | input | Alternate CAN1 bus receive input with ST buffer; the pin also carries I2C5 serial clock SCL5, SPI4 data out SDO4, UART2 TX, PMP address PMA8, CN18 and PORTF pin RF5. |
| 33 | USBID/RF3 | input | USB OTG ID detect input with ST buffer; the pin also serves PORTF I/O pin RF3. |
| 34 | VBUS | power_in | USB bus power monitor input (analog). |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- differential data line (analog I/O); the pin also serves PORTG input pin RG3 with ST buffer. |
| 37 | D+/RG2 | bidirectional | USB D+ differential data line (analog I/O); the pin also serves PORTG input pin RG2 with ST buffer. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise); also external clock source input CLKI and PORTC pin RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output connecting to a crystal or resonator in crystal mode, optionally CLKO in RC and EC modes; also PORTC I/O pin RC15. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/IC1/INT1/RD8 | output | Real-Time Clock and Calendar alarm output; the pin also serves input capture IC1, external interrupt INT1 and PORTD I/O pin RD8 with ST buffer. |
| 43 | SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | SPI3 slave select I/O with ST buffer; the pin also serves UART4 RX, UART1 CTS, I2C1 serial data SDA1, input capture IC2, external interrupt INT2 and PORTD pin RD9. |
| 44 | SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | I2C1 serial clock I/O with ST buffer; the pin also serves input capture IC3, Parallel Master Port chip select 2 PMCS2, PMA15, external interrupt INT3 and PORTD pin RD10. |
| 45 | IC4/PMCS1/PMA14/INT4/RD11 | input | Input capture 4 input with ST buffer; the pin also serves Parallel Master Port chip select 1 PMCS1, PMA14, external interrupt INT4 and PORTD pin RD11. |
| 46 | OC1/INT0/RD0 | output | Output Compare 1 output; the pin also serves external interrupt INT0 (ST input) and PORTD pin RD0. |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power secondary oscillator crystal input (ST buffer, CMOS otherwise); also change notification CN1 and PORTC pin RC13. |
| 48 | SOSCO/T1CK/CN0/RC14 | output | 32.768 kHz low-power secondary oscillator crystal output; the pin also serves Timer1 external clock input T1CK, change notification CN0 and PORTC pin RC14. |
| 49 | SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | SPI3 synchronous serial clock input/output with ST buffer; the pin also serves UART4 TX, UART1 RTS, Output Compare 2 output OC2 and PORTD pin RD1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 synchronous serial data I/O with ST buffer; the pin also serves SPI3 data in SDI3, UART1 RX, Output Compare 3 output OC3 and PORTD pin RD2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 synchronous serial clock I/O with ST buffer; the pin also serves SPI3 data out SDO3, UART1 TX, Output Compare 4 output OC4 and PORTD pin RD3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | output | Output Compare 5 output; the pin also serves input capture IC5, Parallel Master Port write strobe PMWR, change notification CN13 and PORTD pin RD4. |
| 53 | PMRD/CN14/RD5 | output | Parallel Master Port read strobe output; the pin also serves change notification CN14 and PORTD I/O pin RD5 with ST buffer. |
| 54 | CN15/RD6 | input | Change notification input CN15 with ST buffer; the pin also serves PORTD I/O pin RD6. |
| 55 | CN16/RD7 | input | Change notification input CN16 with ST buffer; the pin also serves PORTD I/O pin RD7. |
| 56 | VCAP | passive | Capacitor connection for the internal voltage regulator; it must not be connected to VDD and must have a CEFC capacitor (at least 6V rated) connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/RF0 | input | CAN1 bus receive pin with ST buffer; the pin also serves PORTF I/O pin RF0. |
| 59 | C1TX/RF1 | output | CAN1 bus transmit pin; the pin also serves PORTF I/O pin RF1 with ST buffer. |
| 60 | PMD0/RE0 | bidirectional | PORTE bidirectional I/O pin RE0 with TTL/ST input buffer, also Parallel Master Port data bit PMD0. |
| 61 | PMD1/RE1 | bidirectional | PORTE bidirectional I/O pin RE1 with TTL/ST input buffer, also Parallel Master Port data bit PMD1. |
| 62 | PMD2/RE2 | bidirectional | PORTE bidirectional I/O pin RE2 with TTL/ST input buffer, also Parallel Master Port data bit PMD2. |
| 63 | PMD3/RE3 | bidirectional | PORTE bidirectional I/O pin RE3 with TTL/ST input buffer, also Parallel Master Port data bit PMD3. |
| 64 | PMD4/RE4 | bidirectional | PORTE bidirectional I/O pin RE4 with TTL/ST input buffer, also Parallel Master Port data bit PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (VDD operating) | 2.3 | 3.6 | V | Operating Conditions headline, page 1 | 1 | ||
| Operating temperature range | -40 | 105 | °C | Operating Conditions headline, page 1 | 1 | ||
| CPU clock frequency | 80 | MHz | DC to 80 MHz, page 1 | 1 | |||
| Dynamic current | 0.5 | mA/MHz | Typical, page 1 Power Management | 1 | |||
| IPD current | IPD | 41 | µA | Typical, page 1 Power Management | 1 | ||
| I/O source/sink current, standard VOH/VOL pins | 15 | mA | Standard VOH/VOL pins; features summary also states 10 mA, page 1 | 1 | |||
| I/O source current, non-standard VOH1 pins | VOH1 | 22 | mA | Non-standard VOH1 pins, page 1 | 1 |
CAD (KiCad official)
- Symbol:
PIC32MX564F064H-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx564f064h-i-pt-etched.step/pic32mx564f064h-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx564f064h-i-pt.step/pic32mx564f064h-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).