main
Ray Publish 0.1.0 4244764

PIC32MX534F064H-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC32MX534F064H-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PMD5/RE5 bidirectional Parallel Master Port data bit 5 multiplexed with PORTE bidirectional I/O pin RE5 (TTL/ST buffer).
2 PMD6/RE6 bidirectional Parallel Master Port data bit 6 multiplexed with PORTE bidirectional I/O pin RE6 (TTL/ST buffer).
3 PMD7/RE7 bidirectional Parallel Master Port data bit 7 multiplexed with PORTE bidirectional I/O pin RE7 (TTL/ST buffer).
4 SCK2/U6TX/U3RTS/PMA5/CN8/RG6 bidirectional Synchronous serial clock input/output for SPI2, multiplexed with UART6 transmit and PORTG pin RG6.
5 SDA4/SDI2/U3RX/PMA4/CN9/RG7 bidirectional Synchronous serial data input/output for I2C4, multiplexed with SPI2 data input and PORTG pin RG7.
6 SCL4/SDO2/U3TX/PMA3/CN10/RG8 bidirectional Synchronous serial clock input/output for I2C4, multiplexed with SPI2 data output and PORTG pin RG8.
7 MCLR input Master Clear (Reset) input; an active-low Reset to the device.
8 SS2/U6RX/U3CTS/PMA2/CN11/RG9 bidirectional SPI2 slave synchronization or frame pulse I/O, multiplexed with UART6 receive and PORTG pin RG9.
9 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
10 VDD power_in Positive supply for peripheral logic and I/O pins.
11 AN5/C1IN+/VBUSON/CN7/RB5 bidirectional Analog input channel 5, also Comparator 1 positive input and USB host/OTG bus power control output VBUSON.
12 AN4/C1IN-/CN6/RB4 bidirectional Analog input channel 4, also Comparator 1 negative input and PORTB bidirectional I/O pin RB4.
13 AN3/C2IN+/CN5/RB3 bidirectional Analog input channel 3, also Comparator 2 positive input and PORTB bidirectional I/O pin RB3.
14 AN2/C2IN-/CN4/RB2 bidirectional Analog input channel 2, also Comparator 2 negative input and PORTB bidirectional I/O pin RB2.
15 PGEC1/AN1/VREF-/CVREF-/CN3/RB1 bidirectional Clock input for programming/debugging channel 1, also analog input AN1, analog voltage reference input VREF- and PORTB pin RB1.
16 PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 bidirectional Data I/O pin for programming/debugging channel 1, also analog input AN0, analog voltage reference input VREF+ and PORTB pin RB0.
17 PGEC2/AN6/OCFA/RB6 bidirectional Clock input for programming/debugging channel 2, also analog input AN6, Output Compare Fault A input and PORTB pin RB6.
18 PGED2/AN7/RB7 bidirectional Data I/O pin for programming/debugging channel 2, also analog input AN7 and PORTB pin RB7.
19 AVDD power_in Positive supply for analog modules; this pin must be connected at all times.
20 AVSS power_in Ground reference for analog modules.
21 AN8/SS4/U5RX/U2CTS/C1OUT/RB8 bidirectional Analog input channel 8, also Comparator 1 output C1OUT and PORTB bidirectional I/O pin RB8.
22 AN9/C2OUT/PMA7/RB9 bidirectional Analog input channel 9, also Comparator 2 output C2OUT and PORTB bidirectional I/O pin RB9.
23 TMS/AN10/CVREFOUT/PMA13/RB10 bidirectional JTAG test mode select input, also analog input AN10, comparator voltage reference output CVREFOUT and PORTB pin RB10.
24 TDO/AN11/PMA12/RB11 bidirectional JTAG test data output, also analog input AN11 and PORTB bidirectional I/O pin RB11.
25 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
26 VDD power_in Positive supply for peripheral logic and I/O pins.
27 TCK/AN12/PMA11/RB12 bidirectional JTAG test clock input, also analog input AN12 and PORTB bidirectional I/O pin RB12.
28 TDI/AN13/PMA10/RB13 bidirectional JTAG test data input, also analog input AN13 and PORTB bidirectional I/O pin RB13.
29 AN14/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 bidirectional Analog input channel 14, also SPI4 clock input/output and PORTB bidirectional I/O pin RB14.
30 AN15/OCFB/PMALL/PMA0/CN12/RB15 bidirectional Analog input channel 15, also Output Compare Fault B input and PORTB bidirectional I/O pin RB15.
31 AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 bidirectional Alternate CAN1 bus transmit pin, also I2C5 serial data input/output and PORTF bidirectional I/O pin RF4.
32 AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 bidirectional Alternate CAN1 bus receive pin, also I2C5 serial clock input/output and PORTF bidirectional I/O pin RF5.
33 USBID/RF3 bidirectional USB OTG ID detect input, also PORTF bidirectional I/O pin RF3.
34 VBUS power_in USB bus power monitor input.
35 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD.
36 D-/RG3 bidirectional USB differential data minus line, also PORTG input pin RG3.
37 D+/RG2 bidirectional USB differential data plus line, also PORTG input pin RG2.
38 VDD power_in Positive supply for peripheral logic and I/O pins.
39 OSC1/CLKI/RC12 input Oscillator crystal input or external clock source input; ST buffer in RC mode, CMOS otherwise.
40 OSC2/CLKO/RC15 bidirectional Oscillator crystal output, optionally functioning as CLKO in RC and EC modes, also PORTC I/O pin RC15.
41 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
42 RTCC/IC1/INT1/RD8 bidirectional Real-Time Clock alarm output RTCC, also Input Capture 1 input and PORTD bidirectional I/O pin RD8.
43 SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 bidirectional SPI3 slave synchronization or frame pulse I/O, also I2C1 serial data and PORTD bidirectional I/O pin RD9.
44 SCL1/IC3/PMCS2/PMA15/INT3/RD10 bidirectional Synchronous serial clock input/output for I2C1, also Input Capture 3 input and PORTD bidirectional I/O pin RD10.
45 IC4/PMCS1/PMA14/INT4/RD11 bidirectional Input Capture 4 input, also Parallel Master Port chip select 1 strobe and PORTD bidirectional I/O pin RD11.
46 OC1/INT0/RD0 bidirectional Output Compare 1 output, also external interrupt 0 input and PORTD bidirectional I/O pin RD0.
47 SOSCI/CN1/RC13 input 32.768 kHz low-power oscillator crystal input, CMOS otherwise, also PORTC pin RC13.
48 SOSCO/T1CK/CN0/RC14 bidirectional 32.768 kHz low-power oscillator crystal output, also Timer1 external clock input and PORTC pin RC14.
49 SCK3/U4TX/U1RTS/OC2/RD1 bidirectional Synchronous serial clock input/output for SPI3, also Output Compare 2 output and PORTD bidirectional I/O pin RD1.
50 SDA3/SDI3/U1RX/OC3/RD2 bidirectional Synchronous serial data input/output for I2C3, also SPI3 data input, Output Compare 3 output and PORTD pin RD2.
51 SCL3/SDO3/U1TX/OC4/RD3 bidirectional Synchronous serial clock input/output for I2C3, also SPI3 data output, Output Compare 4 output and PORTD pin RD3.
52 OC5/IC5/PMWR/CN13/RD4 bidirectional Output Compare 5 output, also Input Capture 5 input, Parallel Master Port write strobe and PORTD pin RD4.
53 PMRD/CN14/RD5 bidirectional Parallel Master Port read strobe output, also PORTD bidirectional I/O pin RD5.
54 CN15/RD6 bidirectional PORTD bidirectional I/O pin RD6 with change notification input CN15.
55 CN16/RD7 bidirectional PORTD bidirectional I/O pin RD7 with change notification input CN16.
56 VCAP passive Capacitor for the internal voltage regulator; a low-ESR (1 ohm) capacitor with at least a 6V rating connected to ground is required, and VCAP must not be connected to VDD.
57 VDD power_in Positive supply for peripheral logic and I/O pins.
58 C1RX/RF0 bidirectional CAN1 bus receive pin, also PORTF bidirectional I/O pin RF0.
59 C1TX/RF1 bidirectional CAN1 bus transmit pin, also PORTF bidirectional I/O pin RF1.
60 PMD0/RE0 bidirectional Parallel Master Port data bit 0, also PORTE bidirectional I/O pin RE0 (TTL/ST buffer).
61 PMD1/RE1 bidirectional Parallel Master Port data bit 1, also PORTE bidirectional I/O pin RE1 (TTL/ST buffer).
62 PMD2/RE2 bidirectional Parallel Master Port data bit 2, also PORTE bidirectional I/O pin RE2 (TTL/ST buffer).
63 PMD3/RE3 bidirectional Parallel Master Port data bit 3, also PORTE bidirectional I/O pin RE3 (TTL/ST buffer).
64 PMD4/RE4 bidirectional Parallel Master Port data bit 4, also PORTE bidirectional I/O pin RE4 (TTL/ST buffer).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 105 °C 355
Storage temperature -65 150 °C 355
Voltage on VDD with respect to VSS VDD -0.3 4 V 355
Voltage on any pin that is not 5V tolerant with respect to VSS -0.3 V max VDD + 0.3V (Note 3) 355
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 2.3V -0.3 5.5 V when VDD ≥ 2.3V (Note 3) 355
Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V -0.3 3.6 V when VDD < 2.3V (Note 3) 355
Voltage on VBUS with respect to VSS VBUS -0.3 5.5 V 355
Supply voltage VDD 2.3 3.6 V 1
Maximum frequency 0 80 MHz DC to 80 MHz 1
Operating temperature (Industrial) TA -40 85 °C Industrial (-I) 357
Supply Voltage VDD 2.3 3.6 V 357
RAM Data Retention Voltage VDR 1.75 V Note 1: limit to which VDD can be lowered without losing RAM data 357
VDD Start Voltage to Ensure Internal Power-on Reset Signal VPOR 1.75 2.1 V 357
VDD Rise Rate to Ensure Internal Power-on Reset Signal SVDD 5e-05 0.115 V/s 357
Dynamic current 0.5 mA/MHz 1
IPD current IPD 41 µA 1

CAD (KiCad official)

  • Symbol: PIC32MX534F064H-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic32mx534f064h-i-etched.step / pic32mx534f064h-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mx534f064h-i.step / pic32mx534f064h-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256 2413ac5834b12306, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF