main
Ray pic32mx274f256d-i-ml: renamed from pic32mx274f256d-i, the part it was built from (PIC32MX274F256D-I/ML); family listed 7b8a3da

PIC32MX274F256D-I/ML

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-44-EP(8x8)

PIC32MX274F256D-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RPB9/SDA1/CTED4/PMA7/RB9 bidirectional PORTB I/O RB9 with remappable RPB9, I2C1 SDA1 data, CTMU edge input CTED4 and PMP address PMA7.
2 RPC6/PMA1/RC6 bidirectional PORTC I/O RC6 with remappable RPC6 and PMP address PMA1.
3 RPC7/PMCS1/RC7 bidirectional PORTC I/O RC7 with remappable RPC7 and PMP chip select 1 strobe PMCS1.
4 RPC8/PMD5/RC8 bidirectional PORTC I/O RC8 with remappable RPC8 and PMP data bit PMD5.
5 RPC9/CTED7/PMD6/RC9 bidirectional PORTC I/O RC9 with remappable RPC9, CTMU edge input CTED7 and PMP data bit PMD6.
6 VSS power_in Ground reference for logic and I/O pins; must be connected at all times.
7 VCAP passive CPU logic filter capacitor connection; needs a low-ESR (3 ohm) capacitor to ground and must not be connected to VDD.
8 D+ bidirectional USB D+ differential data line (analog I/O).
9 D- bidirectional USB D- differential data line (analog I/O).
10 VUSB3V3 power_in USB internal transceiver supply; must be connected to VDD.
11 AN11/RPB13/CTPLS/PMRD/RB13 bidirectional PORTB I/O RB13 with analog input AN11, remappable RPB13, CTMU pulse output CTPLS and PMP read strobe PMRD.
12 PGED4/PMD0/RA10 bidirectional PORTA I/O RA10 with programming/debugging data channel 4 PGED4 and PMP data bit PMD0.
13 PGEC4/TCK/CTED8/PMD3/RA7 bidirectional PORTA I/O RA7 with programming/debugging clock channel 4 PGEC4, JTAG test clock TCK, CTMU edge input CTED8 and PMP data bit PMD3.
14 CVREFOUT/AN10/C3INB/RPB14/SCK1/CTED5/RB14 bidirectional PORTB I/O RB14 with comparator voltage reference output CVREFOUT, analog input AN10, comparator 3 input C3INB, remappable RPB14, SPI1 clock SCK1 and CTMU edge input CTED5.
15 AN9/C3INA/RPB15/SCK2/CTED6/PMA0/RB15 bidirectional PORTB I/O RB15 with analog input AN9, comparator 3 input C3INA, remappable RPB15, SPI2 clock SCK2, CTMU edge input CTED6 and PMP address PMA0.
16 AVSS power_in Ground reference for analog modules; must be connected even if the ADC is not used.
17 AVDD power_in Positive supply for analog modules; must be connected at all times.
18 MCLR input Master Clear active-low Reset input, also used for device programming and debugging.
19 PGED3/VREF+/AN0/C3INC/RPA0/ASDA1/CTED1/PMA3/RA0 bidirectional PORTA I/O RA0 with programming data channel 3 PGED3, voltage reference high VREF+, analog input AN0, comparator 3 input C3INC, remappable RPA0, alternate I2C1 data ASDA1, CTMU edge input CTED1 and PMP address PMA3.
20 PGEC3/VREF-/AN1/RPA1/ASCL1/CTED2/PMA6/RA1 bidirectional PORTA I/O RA1 with programming clock channel 3 PGEC3, voltage reference low VREF-, analog input AN1, remappable RPA1, alternate I2C1 clock ASCL1, CTMU edge input CTED2 and PMP address PMA6.
21 PGED2/AN2/C1IND/C2INB/C3IND/RPB0/PMA10/RB0 bidirectional PORTB I/O RB0 with programming data channel 2 PGED2, analog input AN2, comparator inputs C1IND/C2INB/C3IND, remappable RPB0 and PMP address PMA10.
22 PGEC2/AN3/C1INC/C2INA/LVDIN/RPB1/CTED12/PMA9/RB1 bidirectional PORTB I/O RB1 with programming clock channel 2 PGEC2, analog input AN3, comparator inputs C1INC/C2INA, low-voltage detect input LVDIN, remappable RPB1, CTMU edge input CTED12 and PMP address PMA9.
23 PGED1/AN4/C1INB/C2IND/RPB2/SDA2/CTED13/PMA8/RB2 bidirectional PORTB I/O RB2 with programming data channel 1 PGED1, analog input AN4, comparator inputs C1INB/C2IND, remappable RPB2, I2C2 data SDA2, CTMU edge input CTED13 and PMP address PMA8.
24 PGEC1/AN5/C1INA/C2INC/RTCC/RPB3/SCL2/PMA2/RB3 bidirectional PORTB I/O RB3 with programming clock channel 1 PGEC1, analog input AN5, comparator inputs C1INA/C2INC, RTCC alarm output, remappable RPB3, I2C2 clock SCL2 and PMP address PMA2.
25 AN6/RPC0/RC0 bidirectional PORTC I/O RC0 with analog input AN6 and remappable RPC0.
26 AN7/RPC1/RC1 bidirectional PORTC I/O RC1 with analog input AN7 and remappable RPC1.
27 AN8/RPC2/PMWR/RC2 bidirectional PORTC I/O RC2 with analog input AN8, remappable RPC2 and PMP write strobe PMWR.
28 VDD power_in Positive supply for peripheral logic and I/O pins; operating range 2.5V to 3.6V.
29 VSS power_in Ground reference for logic and I/O pins; must be connected at all times.
30 OSC1/CLKI/RPA2/RA2 bidirectional Oscillator crystal input or external clock input CLKI, shared with remappable RPA2 and PORTA I/O RA2.
31 OSC2/CLKO/RPA3/RA3 bidirectional Oscillator crystal output or CLKO in RC and EC modes, shared with remappable RPA3 and PORTA I/O RA3.
32 TDO/RPA8/PMD2/RA8 bidirectional PORTA I/O RA8 with JTAG test data output TDO, remappable RPA8 and PMP data bit PMD2.
33 SOSCI/RPB4/CTED11/RB4 bidirectional 32.768 kHz secondary oscillator input SOSCI with PORTB RB4, remappable RPB4 and CTED11; alternate functions are input only.
34 SOSCO/RPA4/T1CK/CTED9/RA4 bidirectional 32.768 kHz secondary oscillator output SOSCO with PORTA RA4, Timer1 clock T1CK and CTED9; alternate functions are input only.
35 TDI/RPA9/PMD1/RA9 bidirectional PORTA I/O RA9 with JTAG test data input TDI, remappable RPA9 and PMP data bit PMD1.
36 AN12/RPC3/RC3 bidirectional PORTC I/O RC3 with analog input AN12 and remappable RPC3.
37 RPC4/PMD4/RC4 bidirectional PORTC I/O RC4 with remappable RPC4 and PMP data bit PMD4.
38 RPC5/PMD7/RC5 bidirectional PORTC I/O RC5 with remappable RPC5 and PMP data bit PMD7.
39 VSS power_in Ground reference for logic and I/O pins; must be connected at all times.
40 VDD power_in Positive supply for peripheral logic and I/O pins; operating range 2.5V to 3.6V.
41 TMS/RPB5/USBID/RB5 bidirectional PORTB I/O RB5 with JTAG test mode select TMS, remappable RPB5 and USB OTG ID detect USBID.
42 VBUS power_in USB bus power monitor analog input.
43 RPB7/CTED3/PMA5/INT0/RB7 bidirectional PORTB I/O RB7 with remappable RPB7, CTMU edge input CTED3, PMP address PMA5 and external interrupt INT0.
44 RPB8/SCL1/CTED10/PMA4/RB8 bidirectional PORTB I/O RB8 with remappable RPB8, I2C1 clock SCL1, CTMU edge input CTED10 and PMP address PMA4.
45 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-44-EP(8x8)
Category Single Chip Microcomputer/Microcontroller
Pins 45

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
HLVD Voltage on VDD Transition, LVDL<3:0> = 0100 VHLVD 3.45 3.59 3.73 V LVDL<3:0> = 0100(1) 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 0101 VHLVD 3.3 3.44 3.57 V 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 0110 VHLVD 3 3.13 3.25 V 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 0111 VHLVD 2.8 2.92 3.03 V 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 1000 VHLVD 2.7 2.81 2.92 V 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 1001 VHLVD 2.5 2.6 2.71 V 300
HLVD Voltage on VDD Transition, LVDL<3:0> = 1010 VHLVD 2.4 2.5 2.6 V 300
Supply voltage (operating range, Standard Operating Conditions) 2.5 3.6 V -40ºC to +85ºC, DC to 72 MHz 1
Operating temperature (Industrial -I) -40 85 ºC 2.5V to 3.6V, DC to 72 MHz 1
HLVD Voltage on HLVDIN Pin Transition VHTHL 1.2 V LVDL<3:0> = 1111 300

CAD (KiCad official)

  • Symbol: PIC32MX274F256D-I
  • Footprint: Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm
  • 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: pic32mx274f256d-i-etched.step / pic32mx274f256d-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mx274f256d-i.step / pic32mx274f256d-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (368 pp, sha256 897291e50fa0e202, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC32MX274F256D-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC32MX274F256D-I/PT