Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MX274F256B-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC32MX274F256B-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGED2/AN2/C1IND/C2INB/C3IND/RPB0/PMD0/RB0 | bidirectional | ICSP/debug data I/O for Communication Channel 2 that is also ADC analog input AN2, comparator inputs, a remappable pin (RPB0), PMP data PMD0 and PORTB bit RB0 (ST input). |
| 2 | PGEC2/AN3/C1INC/C2INA/LVDIN/RPB1/CTED12/PMD1/RB1 | input | ICSP/debug clock input for Communication Channel 2 that is also ADC analog input AN3, comparator inputs, the LVDIN low-voltage detect pin, and PORTB bit RB1 (ST input). |
| 3 | PGED1/AN4/C1INB/C2IND/RPB2/SDA2/CTED13/PMD2/RB2 | bidirectional | ICSP/debug data I/O for Communication Channel 1 that is also ADC analog input AN4, comparator input, I2C2 data SDA2, a remappable pin (RPB2), PMP data PMD2 and PORTB bit RB2 (ST). |
| 4 | PGEC1/AN5/C1INA/C2INC/RTCC/RPB3/SCL2/PMWR/RB3 | input | ICSP/debug clock input for Communication Channel 1 that is also ADC analog input AN5, comparator input, RTCC alarm output, I2C2 clock SCL2 and PORTB bit RB3 (ST). |
| 5 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 6 | OSC1/CLKI/RPA2/RA2 | input | Oscillator crystal input or external clock source input (CLKI), using an ST buffer in RC mode and CMOS otherwise. |
| 7 | OSC2/CLKO/RPA3/PMA0/RA3 | output | Oscillator crystal output that connects to a crystal or resonator in Crystal Oscillator mode and optionally functions as CLKO in RC and EC modes. |
| 8 | SOSCI/RPB4/CTED11/RB4 | input | 32.768 kHz low-power secondary oscillator crystal input (CMOS otherwise); alternate functions on this pin are input only. |
| 9 | SOSCO/RPA4/T1CK/CTED9/RA4 | output | 32.768 kHz low-power secondary oscillator crystal output, which becomes an input when SOSC is driven by an external clock; alternate functions on this pin are input only. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | TMS/RPB5/USBID/RB5 | input | JTAG test mode select input (TMS, ST) that is also USB OTG ID detect input USBID, a remappable pin (RPB5) and PORTB bit RB5 (ST). |
| 12 | VBUS | power_in | USB bus power monitor input (analog) for VBUS. |
| 13 | TDI/RPB7/CTED3/PMD5/INT0/RB7 | input | JTAG test data input (TDI) that is also external interrupt INT0, CTMU edge input CTED3, PMP data PMD5 and PORTB bit RB7 (ST). |
| 14 | TCK/RPB8/SCL1/CTED10/PMD4/RB8 | input | JTAG test clock input (TCK, ST) that is also I2C1 clock SCL1, CTMU edge input CTED10, PMP data PMD4 and PORTB bit RB8 (ST). |
| 15 | TDO/RPB9/SDA1/CTED4/PMD3/RB9 | output | JTAG test data output (TDO) that is also I2C1 data SDA1, CTMU edge input CTED4, PMP data PMD3 and PORTB bit RB9 (ST). |
| 16 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 17 | VCAP | passive | CPU logic filter capacitor connection; it must not be connected to VDD and needs a low-ESR CEFC capacitor (at least 6V rated) to ground. |
| 18 | D+ | bidirectional | USB D+ differential data line (analog I/O). |
| 19 | D- | bidirectional | USB D- differential data line (analog I/O). |
| 20 | VUSB3V3 | power_in | USB internal transceiver supply; this pin must be connected to VDD. |
| 21 | AN11/RPB13/CTPLS/PMRD/RB13 | input | ADC analog input AN11 that is also a remappable pin (RPB13), CTMU pulse output CTPLS, PMP read strobe PMRD and PORTB bit RB13 (ST). |
| 22 | CVREFOUT/AN10/C3INB/RPB14/SCK1/CTED5/PMA1/RB14 | output | Comparator voltage reference output CVREFOUT (analog) that is also ADC analog input AN10, comparator 3 input C3INB, SPI1 clock SCK1 and PORTB bit RB14 (ST). |
| 23 | AN9/C3INA/RPB15/SCK2/CTED6/PMCS1/RB15 | input | ADC analog input AN9 that is also comparator 3 positive input C3INA, a remappable pin (RPB15), SPI2 clock SCK2, PMP chip select PMCS1 and PORTB bit RB15 (ST). |
| 24 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 25 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 26 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device (ST input). |
| 27 | PGED3/VREF+/AN0/C3INC/RPA0/ASDA1/CTED1/PMD7/RA0 | bidirectional | ICSP/debug data I/O for Communication Channel 3 that is also analog voltage reference input VREF+, ADC analog input AN0, alternate I2C1 data ASDA1, and PORTA bit RA0 (ST). |
| 28 | PGEC3/VREF-/AN1/RPA1/ASCL1/CTED2/PMD6/RA1 | input | ICSP/debug clock input for Communication Channel 3 that is also analog voltage reference input VREF- (low), ADC analog input AN1, alternate I2C1 clock ASCL1, and PORTA bit RA1 (ST). |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating temperature range (Industrial, -I) | TA | -40 | 85 | °C | Standard Operating Conditions, Industrial | 300 | |
| Standard operating supply voltage | 2.5 | 3.6 | V | Standard Operating Conditions | 300 | ||
| Maximum operating frequency | 72 | MHz | 2.5V to 3.6V, -40ºC to +85ºC | 1 | |||
| HLVD voltage on VDD transition | VHLVD | 3.45 | 3.59 | 3.73 | V | LVDL<3:0> = 0100 | 300 |
| HLVD voltage on VDD transition | VHLVD | 3.3 | 3.44 | 3.57 | V | LVDL<3:0> = 0101 | 300 |
| HLVD voltage on VDD transition | VHLVD | 3 | 3.13 | 3.25 | V | LVDL<3:0> = 0110 | 300 |
| HLVD voltage on VDD transition | VHLVD | 2.8 | 2.92 | 3.03 | V | LVDL<3:0> = 0111 | 300 |
| HLVD voltage on VDD transition | VHLVD | 2.7 | 2.81 | 2.92 | V | LVDL<3:0> = 1000 | 300 |
| HLVD voltage on VDD transition | VHLVD | 2.5 | 2.6 | 2.71 | V | LVDL<3:0> = 1001 | 300 |
| HLVD voltage on VDD transition | VHLVD | 2.4 | 2.5 | 2.6 | V | LVDL<3:0> = 1010 | 300 |
| HLVD voltage on HLVDIN pin transition | VHTHL | 1.2 | V | LVDL<3:0> = 1111 | 300 | ||
| Bulk capacitor (recommended) | 4.7 | 47 | µF | Recommended to improve power supply stability, located close to device | 28 | ||
| VCAP external capacitor (CEFC) rated voltage | CEFC | 6 | V | Minimum rating; tantalum or ceramic, connected to ground | 28 | ||
| VCAP external capacitor ESR | ESR | 3 | Ω | Low-ESR capacitor on VCAP, ESR 3 Ω from -40ºC to 125ºC at SYSCLK frequency | 28 | ||
| VCAP external capacitor value | CEFC | 10 | µF | Tantalum or ceramic | 28 | ||
| VDD decoupling capacitor rated voltage | 10 | 20 | V | Low-ESR ceramic, recommended | 27 | ||
| VDD decoupling capacitor value | 0.1 | µF | Low-ESR ceramic, resonance frequency 20 MHz and higher | 27 | |||
| Deep Sleep current | 673 | nA | 1 | ||||
| CTMU current source, nominal current range 1000x base | 550 | µA | IRNG<1:0> = 00 | 263 | |||
| CTMU current source, nominal current range base | 0.55 | µA | IRNG<1:0> = 01 | 263 | |||
| CTMU current source, nominal current range 10x base | 5.5 | µA | IRNG<1:0> = 10 | 263 | |||
| CTMU current source, nominal current range 100x base | 55 | µA | IRNG<1:0> = 11 | 263 |
CAD (KiCad official)
- Symbol:
PIC32MX274F256B-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic32mx274f256b-i-etched.step/pic32mx274f256b-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx274f256b-i.step/pic32mx274f256b-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (368 pp, sha256
897291e50fa0e202, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).