Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MX170F256B-50I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC32MX170F256B-50I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device, with Schmitt-trigger (ST) input buffer. |
| 2 | VREF+/CVREF+/AN0/C3INC/RPA0/CTED1/RA0 | power_in | Analog voltage reference (high) input, also multiplexed as AN0, CVREF+ and PORTA RA0. |
| 3 | VREF-/CVREF-/AN1/RPA1/CTED2/RA1 | power_in | Analog voltage reference (low) input, also multiplexed as AN1, CVREF- and PORTA RA1. |
| 4 | PGED1/AN2/C1IND/C2INB/C3IND/RPB0/RB0 | bidirectional | Data I/O pin for Programming/Debugging Communication Channel 1, with Schmitt-trigger (ST) buffer; also multiplexed as AN2 and PORTB RB0. |
| 5 | PGEC1/AN3/C1INC/C2INA/RPB1/CTED12/RB1 | input | Clock input pin for Programming/Debugging Communication Channel 1; also multiplexed as AN3 and PORTB RB1. |
| 6 | AN4/C1INB/C2IND/RPB2/SDA2/CTED13/RB2 | input | Analog input channel AN4; also multiplexed as PORTB RB2 (bidirectional, ST buffer) and I2C2 SDA2. |
| 7 | AN5/C1INA/C2INC/RTCC/RPB3/SCL2/RB3 | input | Analog input channel AN5; also multiplexed as RTCC alarm output, I2C2 SCL2 and PORTB RB3. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 9 | OSC1/CLKI/RPA2/RA2 | input | Oscillator crystal input; ST buffer when configured in RC mode, CMOS otherwise. |
| 10 | OSC2/CLKO/RPA3/PMA0/RA3 | output | Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; optionally functions as CLKO in RC and EC modes. |
| 11 | SOSCI/RPB4/RB4 | input | 32.768 kHz low-power oscillator crystal input; CMOS otherwise. |
| 12 | SOSCO/RPA4/T1CK/CTED9/PMA1/RA4 | output | 32.768 kHz low-power oscillator crystal output; also multiplexed as Timer1 clock input T1CK. |
| 13 | VDD | power_in | Positive supply for peripheral logic and I/O pins; operating range is 2.3V to 3.6V. |
| 14 | PGED3/RPB5/PMD7/RB5 | bidirectional | Data I/O pin for Programming/Debugging Communication Channel 3, with Schmitt-trigger (ST) buffer. |
| 15 | PGEC3/RPB6/PMD6/RB6 | input | Clock input pin for Programming/Debugging Communication Channel 3. |
| 16 | TDI/RPB7/CTED3/PMD5/INT0/RB7 | input | JTAG test data input pin; also multiplexed as external interrupt INT0 and PORTB RB7 (ST buffer). |
| 17 | TCK/RPB8/SCL1/CTED10/PMD4/RB8 | input | JTAG test clock input pin with ST buffer; also multiplexed as I2C1 SCL1 and PORTB RB8. |
| 18 | TDO/RPB9/SDA1/CTED4/PMD3/RB9 | output | JTAG test data output pin; also multiplexed as I2C1 SDA1 and PORTB RB9. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 20 | VCAP | power_out | CPU logic filter capacitor connection; it must not be connected to VDD and requires a CEFC capacitor (at least 6V rating) to ground. |
| 21 | PGED2/RPB10/CTED11/PMD2/RB10 | bidirectional | Data I/O pin for Programming/Debugging Communication Channel 2, with Schmitt-trigger (ST) buffer. |
| 22 | PGEC2/TMS/RPB11/PMD1/RB11 | input | Clock input pin for Programming/Debugging Communication Channel 2; also multiplexed as JTAG TMS and PORTB RB11. |
| 23 | AN12/PMD0/RB12 | input | Analog input channel AN12 (pin 23 applies to PIC32MX1XX devices); also multiplexed as PMP data PMD0 and PORTB RB12. |
| 24 | AN11/RPB13/CTPLS/PMRD/RB13 | input | Analog input channel AN11; also multiplexed as CTMU pulse output CTPLS, PMP read strobe PMRD and PORTB RB13. |
| 25 | CVREFOUT/AN10/C3INB/RPB14/SCK1/CTED5/PMWR/RB14 | output | Comparator Voltage Reference output; also multiplexed as analog input AN10 and PORTB RB14. |
| 26 | AN9/C3INA/RPB15/SCK2/CTED6/PMCS1/RB15 | input | Analog input channel AN9; also multiplexed as Comparator 3 input C3INA, SPI2 clock SCK2 and PORTB RB15. |
| 27 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times, even if the ADC is not used. |
| 28 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times, even if the ADC is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD range, -40°C to +85°C, DC to 50 MHz) | VDD | 2.3 | 3.6 | V | -40°C to +85°C, DC to 50 MHz (Operating Conditions, page 1) | 1 | |
| Max. Frequency (DC5) | 40 | MHz | VDD 2.3-3.6V, -40°C to +85°C (Table 30-1) | 262 | |||
| Max. Frequency (operating conditions summary) | 50 | MHz | 2.3V to 3.6V, -40°C to +85°C (Operating Conditions, page 1) | 1 | |||
| Operating Junction Temperature Range (industrial) | TJ | -40 | 125 | °C | Industrial Temperature Devices | 262 | |
| Operating Ambient Temperature Range (industrial) | TA | -40 | 85 | °C | Industrial Temperature Devices | 262 | |
| Package Thermal Resistance, 28-pin SSOP (junction to ambient) | JA | 71 | °C/W | Note 1: achieved by package simulations | 262 |
CAD (KiCad official)
- Symbol:
PIC32MX170F256B-50I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic32mx170f256b-50i-etched.step/pic32mx170f256b-50i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx170f256b-50i.step/pic32mx170f256b-50i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (350 pp, sha256
6f75ee8fe58045ff, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).