main
Ray Publish 0.1.0 3358527

PIC32MM0064GPM036-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · UQFN-40(5x5)

PIC32MM0064GPM036-I from Microchip Tech, in a UQFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AN4/C1INB/RP8/SDA2/OCM2E/RB2 bidirectional PORTB digital I/O RB2 shared with ADC input AN4, Comparator 1 input B, remappable RP8, I2C2 data and MCCP2 output E.
2 TDI/AN11/C1INA/RP9/SCL2/OCM2F/RB3 bidirectional PORTB digital I/O RB3 shared with JTAG data input TDI, ADC input AN11, Comparator 1 input A, RP9, I2C2 clock and MCCP2 output F.
3 AN12/C2IND/T2CK/T2G/RC0 bidirectional PORTC digital I/O RC0 shared with ADC input AN12, Comparator 2 input D, Timer2 external clock and gate inputs.
4 AN13/T3CK/T3G/RC1 bidirectional PORTC digital I/O RC1 shared with ADC input AN13 and Timer3 external clock and gate inputs.
5 RP19/OCM2A/RC2 bidirectional PORTC digital I/O RC2 with remappable RP19 and MCCP2 output A.
6 VSS power_in Digital modules ground; must always be connected.
7 OSC1/CLKI/AN5/RP3/OCM1C/RA2 bidirectional Primary oscillator crystal pin or external clock input (CLKI), shared with ADC input AN5, RP3, MCCP1 output C and PORTA I/O RA2.
8 OSC2/CLKO/AN6/C3IND/RP4/OCM1D/RA3 bidirectional Primary oscillator crystal pin or system clock output (CLKO), shared with AN6, Comparator 3 input D, RP4, MCCP1 output D and high-drive-strength PORTA I/O RA3.
9 SOSCI/AN7/RP10/OCM3C/RB4 bidirectional Secondary oscillator crystal input, shared with ADC input AN7, RP10, MCCP3 output C and PORTB I/O RB4.
10 SOSCO/SCLKI/RP5/PWRLCLK/OCM3D/RA4 bidirectional Secondary oscillator crystal output or digital clock input (SCLKI), shared with RP5, RTCC 50/60 Hz clock input PWRLCLK, MCCP3 output D and PORTA I/O RA4.
11 RP24/OCM3A/RA9 bidirectional PORTA digital I/O RA9 with remappable RP24 and MCCP3 output A.
12 VSS power_in Digital modules ground; must always be connected.
13 VDD power_in Digital modules power supply, 2.0V to 3.6V operating range.
14 RC3 bidirectional PORTC digital I/O RC3.
15 RB5 bidirectional ICSP port 3 programming data, shared with RP11, alternate I2C1 data, USB OTG ID, SPI3 slave select/frame sync, MCCP3 output E and PORTB I/O RB5.
16 VBUS/RB6 power_in USB VBUS connection (5V nominal), shared with PORTB I/O RB6.
17 RP12/SDA3/SDI3/OCM3F/RB7 bidirectional PORTB digital I/O RB7 with remappable RP12, I2C3 data, SPI3 data input and MCCP3 output F.
18 TCK/RP13/SCL1/U1CTS/SCK1/OCM1A/RB8 bidirectional JTAG clock input, shared with RP13, I2C1 clock, UART1 CTS, SPI1 clock, MCCP1 output A and high-drive-strength PORTB I/O RB8.
19 N/C unconnected No internal connection.
20 TMS/REFCLKI/RP14/SDA1/T1CK/T1G/U1RTS/U1BCLK/SDO1/OCM1B/INT2/RB9 bidirectional JTAG mode select input, high-drive-strength PORTB I/O RB9 with reference clock input, RP14, I2C1 data, Timer1 inputs, UART1 signals, SPI1 data out, MCCP1 output B and INT2; may toggle during ICSP programming.
21 AN14/LVDIN/C2INC/RC8 bidirectional PORTC digital I/O RC8 shared with ADC input AN14, High/Low-Voltage Detect input LVDIN and Comparator 2 input C.
22 RC9 bidirectional ICSP port 3 programming clock input and JTAG data output, shared with RP18, alternate I2C1 clock, SPI3 data out, USB output enable and high-drive-strength PORTC I/O RC9.
23 N/C unconnected No internal connection.
24 VCAP power_in Core voltage regulator filter capacitor connection; requires a 10 µF low-ESR (<5 Ω) capacitor to ground and must not be connected to VDD.
25 N/C unconnected No internal connection.
26 VDD power_in Digital modules power supply, 2.0V to 3.6V operating range.
27 D-/RB10 bidirectional USB transceiver differential minus line, shared with PORTB I/O RB10.
28 D+/RB11 bidirectional USB transceiver differential plus line, shared with PORTB I/O RB11.
29 VUSB3V3 power_in USB transceiver power input (3.3V nominal); must be 3.0V to 3.6V for USB operation.
30 AN8/RP15/SCL3/SCK3/RB13 bidirectional High-drive-strength PORTB I/O RB13 shared with ADC input AN8, RP15, I2C3 clock and SPI3 clock.
31 CVREF/AN9/C3INB/RP16/RTCC/U1TX/VBUSON/SDI1/OCM3B/INT1/RB14 bidirectional PORTB I/O RB14 shared with comparator voltage reference output CVREF, ADC input AN9, Comparator 3 input B, RP16, RTCC output, UART1 TX, USB VBUSON, SPI1 data in, MCCP3 output B and INT1.
32 AN10/C3INA/REFCLKO/RP17/U1RX/SS1/FSYNC1/OCM2B/INT0/RB15 bidirectional High-drive-strength PORTB I/O RB15 shared with ADC input AN10, Comparator 3 input A, reference clock output, RP17, UART1 RX, SPI1 slave select/frame sync, MCCP2 output B and INT0.
33 AVSS/VSS power_in Analog modules ground; must be connected even if the ADC is not used.
34 AVDD/VDD power_in Analog modules power supply; must be connected even if the ADC is not used.
35 MCLR input Master Clear (device Reset) input, active low, also used for device programming and debugging.
36 PGEC2/VREF+/CVREF+/AN0/RP1/OCM1E/INT3/RA0 bidirectional ICSP port 2 programming clock input, shared with ADC positive reference VREF+, CVREF+, AN0, RP1, MCCP1 output E, INT3 and PORTA I/O RA0.
37 PGED2/VREF-/AN1/RP2/OCM1F/RA1 bidirectional ICSP port 2 programming data, shared with ADC negative reference VREF-, AN1, RP2, MCCP1 output F and PORTA I/O RA1.
38 PGED1/AN2/C1IND/C2INB/C3INC/RP6/OCM2C/RB0 bidirectional ICSP port 1 programming data, shared with AN2, comparator inputs C1IND/C2INB/C3INC, RP6, MCCP2 output C and PORTB I/O RB0.
39 PGEC1/AN3/C1INC/C2INA/RP7/OCM2D/RB1 bidirectional ICSP port 1 programming clock input, shared with AN3, comparator inputs C1INC/C2INA, RP7, MCCP2 output D and PORTB I/O RB1.
40 N/C unconnected No internal connection.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UQFN-40(5x5)
Category Single Chip Microcomputer/Microcontroller
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2 3.6 V 285
VDD Start Voltage to Ensure Internal Power-on Reset VPOR 100 mV min VSS 285
Recommended VDD Rise Rate SVDD 0.05 V/ms 0-3.3V in 66 ms, 0-2.0V in 40 ms 285
Brown-out Reset Voltage on VDD Transition, High-to-Low VBOR 2 2.083 V 285
Operating Current IDD 7.9 12.5 mA FSYS = 25 MHz, -40°C to +125°C, 3.3V 285
Operating Current IDD 2.5 4.2 mA FSYS = 8 MHz, -40°C to +125°C, 3.3V 285
Operating Current IDD 1.4 mA FSYS = 1 MHz, -40°C to +125°C, 3.3V 285
Operating Current IDD 0.4 1 mA LPRC, FSYS = 32 kHz, -40°C to +125°C, 3.3V 285
Idle Current IIDLE 2.9 4.5 mA FSYS = 25 MHz, -40°C to +125°C, 3.3V 286
Idle Current IIDLE 0.98 2.3 mA FSYS = 8 MHz, -40°C to +125°C, 3.3V 286
Idle Current IIDLE 0.69 1.2 mA FSYS = 1 MHz, -40°C to +125°C, 3.3V 286
Idle Current IIDLE 0.4 1 mA FSYS = 32 kHz, -40°C to +125°C, 3.3V 286
Power-Down Current, Sleep with active main regulator IPD 200 400 µA +125°C, 3.3V, VREGS=1, RETEN=0 287
Power-Down Current, Sleep with active main regulator IPD 130 265 µA +25°C, 3.3V, VREGS=1, RETEN=0 287
Power-Down Current, Sleep with regulator in Standby IPD 55 110 µA +125°C, 3.3V, VREGS=0, RETEN=0 287
Power-Down Current, Sleep with regulator in Standby IPD 5 30 µA +25°C, 3.3V, VREGS=0, RETEN=0 287
Input Low Voltage, I/O pins with ST buffer VIL 0 V min VSS, max 0.2 VDD 289
Input High Voltage, I/O pins with ST buffer, 5V tolerant VIH 5.5 V min 0.8 VDD 289
CNPUx Pull-up Current ICNPU 150 350 450 µA VDD = 3.3V, VPIN = VSS 289
CNPDx Pull-Down Current ICNPD 230 300 500 µA VDD = 3.3V, VPIN = VDD 289
Input Leakage Current, I/O pins IIL 1 µA VSS ≤ VPIN ≤ VDD, pin at high-impedance 289
Output Low Voltage, I/O Ports VOL 0.4 V IOL = 6.6 mA, VDD = 3.6V 291
Output High Voltage, I/O Ports VOH 3.25 V IOH = -6.0 mA, VDD = 3.6V 291
Flash Cell Endurance EP 10000 20000 E/W 291
Characteristic Retention TRETD 20 Year If no other specifications are violated 291
Regulator Output Voltage VRGOUT 1.8 V VDD > 1.9V 292
External Filter Capacitor Value CEFC 4.7 10 µF Series resistance < 3 recommended; < 5 required 292
Comparator Input Offset Voltage VIOFF -20 20 mV 293
Voltage on VDD with respect to VSS -0.3 4 V 283
Storage temperature -65 150 °C 283
Ambient temperature under bias -40 125 °C 283
Maximum output current sunk by I/O pin 11 mA 283
Operating Junction Temperature Range TJ -40 125 °C 284
Operating Ambient Temperature Range TA -40 125 °C 284
Package thermal resistance, 40-Pin UQFN θJA 41 °C/W Junction to ambient, by package simulation 284

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa 01110 = Time base is synchronized to SCCP8 01101 = Time base is synchronized to the INT4 Pin (Remappable) 150

CAD (KiCad official)

  • Symbol: PIC32MM0064GPM036-I
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: UQFN-40(5x5) (KiCad packages3D, STEP)
  • 3D model files: pic32mm0064gpm036-i-etched.step / pic32mm0064gpm036-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mm0064gpm036-i.step / pic32mm0064gpm036-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (356 pp, sha256 e0e3b208b87a54d9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF