3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MM0032GPL028-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC32MM0032GPL028-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear input (Schmitt Trigger); pulling it low generates a device Reset. |
| 2 | VREF+/AN0/RP1/OCM1E/INT3/RA0 | power_in | ADC and DAC positive reference (VREF+) and AN0 analog input, also PORTA digital I/O RA0 and remappable RP1 with INT3 external interrupt. |
| 3 | VREF-/AN1/RP2/OCM1F/RA1 | power_in | ADC negative reference (VREF-) and AN1 analog input, also PORTA digital I/O RA1 and remappable RP2. |
| 4 | PGED1/AN2/C1IND/C2INB/RP14/RB0 | bidirectional | ICSP Port 1 programming data, also AN2 analog input, comparator 1 input D, comparator 2 input B, PORTB digital I/O RB0 and remappable RP14. |
| 5 | PGEC1/AN3/C1INC/C2INA/RP15/RB1 | input | ICSP Port 1 programming clock input, also AN3 analog input, comparator 1 input C, comparator 2 input A, and remappable RP15 with PORTB digital I/O RB1. |
| 6 | AN4/C1INB/RP16/RB2 | bidirectional | AN4 analog input and comparator 1 input B, also remappable RP16 and PORTB digital I/O RB2. |
| 7 | AN11/C1INA/RB3 | bidirectional | AN11 analog input and comparator 1 input A, also PORTB digital I/O RB3. |
| 8 | VSS | power_in | Digital modules ground; VSS and AVSS are internally connected. |
| 9 | OSC1/CLKI/AN5/RP3/OCM1C/RA2 | input | Primary oscillator crystal input or external clock input (EC mode, Schmitt Trigger), also AN5 analog input and PORTA digital I/O RA2. |
| 10 | OSC2/CLKO/AN6/RP4/OCM1D/RA3(1) | bidirectional | Primary oscillator crystal output or system clock output (CLKO), also AN6 analog input and PORTA digital I/O RA3 with increased current drive strength. |
| 11 | SOSCI/RP5/RB4 | bidirectional | Secondary oscillator crystal input, also remappable RP5 and PORTB digital I/O RB4. |
| 12 | SOSCO/SCLKI/RP6/PWRLCLK/RA4 | bidirectional | Secondary oscillator crystal output or secondary oscillator external clock input (SCLKI), also the Real-Time Clock 50/60 Hz clock input PWRLCLK, remappable RP6 and PORTA digital I/O RA4. |
| 13 | VDD | power_in | Digital modules power supply, operating from 2.0V to 3.6V; VDD and AVDD are internally connected. |
| 14 | PGED3/RB5 | bidirectional | ICSP Port 3 programming data, also PORTB digital I/O RB5. |
| 15 | PGEC3/RB6 | bidirectional | ICSP Port 3 programming clock input, also PORTB digital I/O RB6. |
| 16 | RP11/RB7 | bidirectional | Remappable peripheral RP11, also PORTB digital I/O RB7. |
| 17 | TCK/RP7/U1CTS/SCK1/OCM1A/RB8(1) | bidirectional | JTAG clock input (TCK, Schmitt Trigger), also remappable RP7 and PORTB digital I/O RB8 with increased current drive strength. |
| 18 | TMS/REFCLKI/RP8/T1CK/T1G/U1RTS/U1BCLK/SDO1/C2OUT/OCM1B/INT2/RB9(1) | bidirectional | JTAG mode select input (TMS, Schmitt Trigger), also reference clock input REFCLKI, remappable RP8 and PORTB digital I/O RB9 with increased current drive strength. |
| 19 | RP19/RC9 | bidirectional | Remappable peripheral RP19, also PORTC digital I/O RC9. |
| 20 | VCAP | passive | Core voltage regulator filter capacitor connection; VCAP must not be connected to VDD and requires a 10 µF capacitor to ground (CEFC). |
| 21 | PGED2/TDO/RP17/RB10 | bidirectional | ICSP Port 2 programming data, also JTAG data output TDO, remappable RP17 and PORTB digital I/O RB10. |
| 22 | PGEC2/TDI/RP18/RB11 | bidirectional | ICSP Port 2 programming clock input, also JTAG data input TDI, remappable RP18 and PORTB digital I/O RB11. |
| 23 | AN7/LVDIN/RP12/RB12 | bidirectional | ADC input AN7, also High/Low-Voltage Detect input LVDIN, remappable RP12 and PORTB digital I/O RB12. |
| 24 | AN8/RP13/RB13 | bidirectional | ADC input AN8, also remappable RP13 and PORTB digital I/O RB13. |
| 25 | CDAC1/AN9/RP9/RTCC/U1TX/SDI1/C1OUT/INT1/RB14 | bidirectional | Control DAC output CDAC1 and ADC input AN9, also RTCC alarm/seconds output, UART1 transmit, SPI1 data input, remappable RP9 and PORTB digital I/O RB14. |
| 26 | AN10/REFCLKO/RP10/U1RX/SS1/FSYNC1/INT0/RB15(1) | bidirectional | ADC input AN10, also reference clock output REFCLKO, UART1 receive, SPI1 slave select input, remappable RP10 and PORTB digital I/O RB15 with increased current drive strength. |
| 27 | VSS/AVSS | power_in | Digital and analog modules ground; VSS and AVSS are internally connected. |
| 28 | VDD/AVDD | power_in | Digital and analog modules power supply, operating from 2.0V to 3.6V; VDD and AVDD are internally connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 207 | |||
| Storage temperature | -65 | 150 | °C | 207 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 207 | |||
| Voltage on any general purpose digital or analog pin (not 5.5V tolerant) with respect to VSS | -0.3 | V | 207 | ||||
| Voltage on any 5.5V tolerant digital or analog pin with respect to VSS | -0.3 | 4 | V | When VDD = 0V | 207 | ||
| Voltage on any 5.5V tolerant digital or analog pin with respect to VSS | -0.3 | 6 | V | VDD vs 2.0V (sign not legible in extract) | 207 | ||
| Maximum current out of VSS pin | 100 | mA | 207 | ||||
| Maximum output current sunk by I/O pin | 11 | mA | 207 | ||||
| Operating junction temperature range | TJ | -40 | 100 | °C | 85°C rated parts | 208 | |
| Operating junction temperature range | TJ | -40 | 140 | °C | 125°C rated parts | 208 | |
| Operating ambient temperature range | TA | -40 | 85 | °C | 85°C rated parts | 208 | |
| Operating ambient temperature range | TA | -40 | 125 | °C | 125°C rated parts | 208 | |
| Supply voltage (DC10) | VDD | 2 | 3.6 | V | BOR disabled | 209 | |
| Supply voltage with BOR enabled (DC10) | VBOR | 3.6 | V | BOR enabled | 209 | ||
| VDD rise rate to ensure internal power-on reset (DC17A) | SVDD | 0.05 | V/ms | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 209 | ||
| Brown-out reset voltage on VDD transition, high-to-low (DC17B) | VBOR | 1.94 | 2.22 | V | VDD transition, high-to-low | 209 | |
| Output low voltage, I/O ports (DO10) | VOL | 0.36 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output low voltage, I/O ports (DO10) | VOL | 0.21 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output low voltage, RA3/RB8/RB9/RB15 (DO16) | VOL | 0.16 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output low voltage, RA3/RB8/RB9/RB15 (DO16) | VOL | 0.12 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output high voltage, I/O ports (DO20) | VOH | 3.25 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output high voltage, I/O ports (DO20) | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Output high voltage, RA3/RB8/RB9/RB15 (DO26) | VOH | 3.3 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output high voltage, RA3/RB8/RB9/RB15 (DO26) | VOH | 1.55 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Cell endurance (D130) | EP | 10000 | 20000 | E/W | 216 | ||
| VDD for run-time self-programming (RTSP) (D132) | VRTSP | 2 | 3.6 | V | 216 | ||
| Characteristic retention (D134) | TRETD | 20 | Year | If no other specifications are violated | 216 | ||
| Self-timed chip erase time (D136) | TCE | 16 | 17 | 18 | ms | 216 | |
| Operating current, 2.0V/3.3V, FSYS = 1 MHz (DC19) | IDD | 0.45 | 0.65 | mA | 2.0V, FSYS = 1 MHz | 210 | |
| Operating current, 3.3V, FSYS = 1 MHz (DC19) | IDD | 0.45 | 0.65 | mA | 3.3V, FSYS = 1 MHz | 210 | |
| Operating current, FSYS = 8 MHz (DC23) | IDD | 2.5 | 3.5 | mA | 2.0V, FSYS = 8 MHz | 210 | |
| Operating current, FSYS = 25 MHz (DC24) | IDD | 7 | 9.2 | mA | 2.0V, FSYS = 25 MHz | 210 | |
| Operating current, FSYS = 32 kHz (DC25A) | IDD | 0.26 | 0.35 | mA | 2.0V, FSYS = 32 kHz | 210 | |
| Operating current, FSYS = 32 kHz, +125°C (DS25B) | IDD | 0.7 | 0.9 | mA | 3.3V, FSYS = 32 kHz, +125°C | 210 | |
| Power-down current, sleep with active main regulator, -40°C (DC60) | IPD | 134 | 198 | µA | 2.0V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +25°C (DC60) | IPD | 136 | 208 | µA | 2.0V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +85°C (DC60) | IPD | 141 | 217 | µA | 2.0V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +125°C (DC60) | IPD | 350 | 640 | µA | 2.0V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, -40°C (DC60) | IPD | 139 | 209 | µA | 3.3V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +25°C (DC60) | IPD | 141 | 217 | µA | 3.3V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +85°C (DC60) | IPD | 143 | 231 | µA | 3.3V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with active main regulator, +125°C (DC60) | IPD | 400 | 650 | µA | 3.3V; VREGS=1, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, -40°C (DC61) | IPD | 4.3 | 11.7 | µA | 2.0V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +25°C (DC61) | IPD | 5.1 | 15.6 | µA | 2.0V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +85°C (DC61) | IPD | 35 | 55 | µA | 2.0V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +125°C (DC61) | IPD | 40 | 90 | µA | 2.0V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, -40°C (DC61) | IPD | 6.1 | 16.8 | µA | 3.3V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +25°C (DC61) | IPD | 6.9 | 20.1 | µA | 3.3V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +85°C (DC61) | IPD | 12.7 | 36 | µA | 3.3V; VREGS=0, RETEN=0 | 212 | |
| Power-down current, sleep with regulator Standby, +125°C (DC61) | IPD | 60 | 100 | µA | 3.3V; VREGS=0, RETEN=0 | 212 | |
| Junction-to-ambient thermal resistance, 28-pin SSOP | JA | 71 | °C/W | Junction to ambient; from package simulations | 209 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | 01101 = Time base is synchronized to the INT4 pin (remappable) | 102 |
CAD (KiCad official)
- Symbol:
PIC32MM0032GPL028-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic32mm0032gpl028-i-etched.step/pic32mm0032gpl028-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mm0032gpl028-i.step/pic32mm0032gpl028-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (270 pp, sha256
2acc0dacc6349e28, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC32MM0032GPL028-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC32MM0032GPL028-I/ML