component
PIC32MK0512MCM064-E/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
53b6d85
PIC32MK0512MCM064-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MK0512MCM064-E from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TCK/RPA7/PWM10H/PWM4L/PMD5/RA7 | bidirectional | JTAG test clock input shared with remappable RPA7, PWM10H/PWM4L, PMP data bit 5 and digital I/O RA7. |
| 2 | RPB14/PWM1H/VBUSON1/PMD6/RB14 | bidirectional | Digital I/O RB14 with remappable RPB14, MCPWM1 high-side output, USB1 VBUS power control output and PMP data bit 6. |
| 3 | RPB15/PWM7H/PWM1L/PMD7/RB15 | bidirectional | Digital I/O RB15 with remappable RPB15, PWM7H/PWM1L outputs and PMP data bit 7. |
| 4 | AN19/CVD19/RPG6/PWM10L/PMA5/RG6 | bidirectional | Digital I/O RG6 with analog input AN19, CVD19, remappable RPG6, PWM10L and PMP address bit 5. |
| 5 | AN18/CVD18/RPG7/PWM10H/SCL1/PMA4/RG7 | bidirectional | Digital I/O RG7 with analog input AN18, CVD18, remappable RPG7, PWM10H, I2C1 clock SCL1 and PMP address bit 4. |
| 6 | AN17/CVD17/RPG8/SDA1/PMA3/RG8 | bidirectional | Digital I/O RG8 with analog input AN17, CVD17, remappable RPG8, I2C1 data SDA1 and PMP address bit 3. |
| 7 | MCLR | input | Master Clear (Reset) Schmitt-trigger input, active-low device Reset, also used for programming and debugging. |
| 8 | AN16/CVD16/RPG9/PMA2/RG9 | bidirectional | Digital I/O RG9 with analog input AN16, CVD16, remappable RPG9 and PMP address bit 2. |
| 9 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 11 | AN10/CVD10/RPA12/RA12 | bidirectional | Digital I/O RA12 with analog input AN10, CVD10 and remappable RPA12. |
| 12 | AN9/CVD9/RPA11/RA11 | bidirectional | Digital I/O RA11 with analog input AN9, CVD9 and remappable RPA11. |
| 13 | OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 | bidirectional | Digital I/O RA0 with op amp 2 output, analog input AN0, comparator 2/4 negative inputs and remappable RPA0. |
| 14 | OA2IN+/AN1/C2IN1+/RPA1/RA1 | bidirectional | Digital I/O RA1 with op amp 2 positive input, analog input AN1, comparator 2 positive input and remappable RPA1. |
| 15 | PGD3/VREF-/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 | bidirectional | Digital I/O RB0 with ICSP data channel 3 (PGD3), VREF- input, op amp 2 negative input, AN2, comparator 2 negative input, RPB0 and CTMU edge input 2. |
| 16 | PGC3/OA1OUT/VREF+/AN3/C1IN4-/C4IN2-/RPB1/CTED1/PMA6/RB1 | bidirectional | Digital I/O RB1 with ICSP clock channel 3 (PGC3), op amp 1 output, VREF+ input, AN3, comparator inputs, RPB1, CTMU edge input 1 and PMP address bit 6. |
| 17 | PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 | bidirectional | Digital I/O RB2 with ICSP clock channel 1 (PGC1), op amp 1 positive input, AN4, comparator inputs and remappable RPB2. |
| 18 | PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 | bidirectional | Digital I/O RB3 with ICSP data channel 1 (PGD1), op amp 1 negative input, AN5, CTMU capacitor input, comparator 1 negative input, RTCC output and RPB3. |
| 19 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, even if the ADC is not used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must be connected at all times, even if the ADC is not used. |
| 21 | OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 | bidirectional | Digital I/O RC0 with op amp 3 output, analog input AN6, CVD6, comparator 3/4 inputs and remappable RPC0. |
| 22 | OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/PMA7/RC1 | bidirectional | Digital I/O RC1 with op amp 3 negative input, AN7, CVD7, comparator 3/4 negative inputs, RPC1 and PMP address bit 7. |
| 23 | OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/FLT3/PMA13/RC2 | bidirectional | Digital I/O RC2 with op amp 3 positive input, AN8, CVD8, comparator 3 inputs, RPC2, PWM fault input FLT3 and PMP address bit 13. |
| 24 | AN11/CVD11/C1IN2-/FLT4/PMA12/RC11 | bidirectional | Digital I/O RC11 with analog input AN11, CVD11, comparator 1 negative input, PWM fault input FLT4 and PMP address bit 12. |
| 25 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 27 | AN12/CVD12/C2IN2-/C5IN2-/SDA4/FLT5/PMA11/RE12 | bidirectional | Digital I/O RE12 with analog input AN12, CVD12, comparator 2/5 negative inputs, I2C4 data SDA4, fault input FLT5 and PMP address bit 11. |
| 28 | AN13/CVD13/C3IN2-/FLT6/SCL4/PMA10/RE13 | bidirectional | Digital I/O RE13 with analog input AN13, CVD13, comparator 3 negative input, fault input FLT6, I2C4 clock SCL4 and PMP address bit 10. |
| 29 | AN14/CVD14/RPE14/FLT7/PMA1/RE14 | bidirectional | Digital I/O RE14 with analog input AN14, CVD14, remappable RPE14, fault input FLT7 and PMP address bit 1. |
| 30 | AN15/CVD15/RPE15/FLT8/PMA0/RE15 | bidirectional | Digital I/O RE15 with analog input AN15, CVD15, remappable RPE15, fault input FLT8 and PMP address bit 0. |
| 31 | TDI/DAC3/AN26/CVD26/RPA8/SDA2/PMA9/RA8 | bidirectional | Digital I/O RA8 with JTAG test data input, 12-bit CDAC3 output, AN26, CVD26, RPA8, I2C2 data SDA2 and PMP address bit 9. |
| 32 | FLT15/RPB4/SCL2/PMA8/RB4 | bidirectional | Digital I/O RB4 with fault input FLT15, remappable RPB4, I2C2 clock SCL2 and PMP address bit 8. |
| 33 | OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/RA4 | bidirectional | Digital I/O RA4 with op amp 5 positive input, 12-bit CDAC1 output, AN24, CVD24, comparator 5 inputs and remappable RPA4. |
| 34 | VBUS | power_in | USB1 bus power monitor analog input; tie to VSS if USB1 is not used. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; must be connected to VDD. |
| 36 | D- | bidirectional | USB1 D- data line; tie through 10k to VSS if USB1 is not used. |
| 37 | D+ | bidirectional | USB1 D+ data line; tie through 10k to VSS if USB1 is not used. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 39 | OSCI/CLKI/AN49/CVD49/RPC12/RC12 | bidirectional | Primary oscillator crystal input or external clock input CLKI, shared with analog input AN49, CVD49, RPC12 and digital I/O RC12. |
| 40 | OSCO/CLKO/RPC15/RC15 | bidirectional | Primary oscillator crystal output or CLKO in FRC and EC modes, shared with RPC15 and digital I/O RC15. |
| 41 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 42 | RD8 | bidirectional | Digital I/O RD8; also listed as the low-power peripheral logic supply pin that must be bypassed with a 1 uF ceramic capacitor. |
| 43 | PGD2/RPB5/SDA3/USBID1/RB5 | bidirectional | Digital I/O RB5 with ICSP data channel 2 (PGD2), remappable RPB5, I2C3 data SDA3 and USB1 OTG ID detect. |
| 44 | PGC2/RPB6/SCL3/SCK2/PMA15/RB6 | bidirectional | Digital I/O RB6 with ICSP clock channel 2 (PGC2), remappable RPB6, I2C3 clock SCL3, SPI2 clock SCK2 and PMP address bit 15. |
| 45 | DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 | bidirectional | Digital I/O RC10 with 12-bit CDAC2 output, AN48, CVD48, remappable RPC10, PMP address bit 14 and chip select. |
| 46 | OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 | bidirectional | Digital I/O RB7 with op amp 5 output, AN25, CVD25, comparator 5 input, RPB7, SPI1 clock SCK1 and external interrupt INT0. |
| 47 | SOSCI/RPC13/RC13 | input | 32.768 kHz secondary oscillator crystal input, with RPC13/RC13 restricted to input functions only. |
| 48 | SOSCO/T1CK/RPB8/RB8 | bidirectional | 32.768 kHz secondary oscillator crystal output, with Timer1 clock input T1CK and RPB8/RB8 restricted to input functions only. |
| 49 | TMS/OA5IN-/AN27/CVD27/LVDIN/C5IN1-/RPB9/RB9 | bidirectional | Digital I/O RB9 with JTAG test mode select, op amp 5 negative input, AN27, CVD27, LVDIN, comparator 5 negative input and RPB9. |
| 50 | TRCLK/RPC6/PWM6H/RC6 | bidirectional | Digital I/O RC6 with trace clock output, remappable RPC6 and MCPWM6 high-side output. |
| 51 | TRD0/RPC7/PWM12H/PWM6L/RC7 | bidirectional | Digital I/O RC7 with trace data bit 0, remappable RPC7 and PWM12H/PWM6L outputs. |
| 52 | TRD1/RPC8/PWM5H/PMWR/RC8 | bidirectional | Digital I/O RC8 with trace data bit 1, remappable RPC8, MCPWM5 high-side output and PMP write strobe. |
| 53 | TRD2/RPD5/PWM12H/PMRD/RD5 | bidirectional | Digital I/O RD5 with trace data bit 2, remappable RPD5, PWM12H and PMP read strobe. |
| 54 | TRD3/RPD6/PWM12L/RD6 | bidirectional | Digital I/O RD6 with trace data bit 3, remappable RPD6 and MCPWM12 low-side output. |
| 55 | RPC9/PWM11H/PWM5L/RC9 | bidirectional | Digital I/O RC9 with remappable RPC9 and PWM11H/PWM5L outputs. |
| 56 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 58 | RPF0/PWM11H/RF0 | bidirectional | Digital I/O RF0 with remappable RPF0 and MCPWM11 high-side output. |
| 59 | RPF1/PWM11L/RF1 | bidirectional | Digital I/O RF1 with remappable RPF1 and MCPWM11 low-side output. |
| 60 | RPB10/PWM3H/PMD0/RB10 | bidirectional | Digital I/O RB10 with remappable RPB10, MCPWM3 high-side output and PMP data bit 0. |
| 61 | RPB11/PWM9H/PWM3L/PMD1/RB11 | bidirectional | Digital I/O RB11 with remappable RPB11, PWM9H/PWM3L outputs and PMP data bit 1. |
| 62 | RPB12/PWM2H/PMD2/RB12 | bidirectional | Digital I/O RB12 with remappable RPB12, MCPWM2 high-side output and PMP data bit 2. |
| 63 | RPB13/PWM8H/PWM2L/CTPLS/PMD3/RB13 | bidirectional | Digital I/O RB13 with remappable RPB13, PWM8H/PWM2L outputs, CTMU pulse output and PMP data bit 3. |
| 64 | TDO/PWM4H/PMD4/RA10 | bidirectional | Digital I/O RA10 with JTAG test data output, MCPWM4 high-side output and PMP data bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage operating range (VDD) | 2.3 | 3.6 | V | 1 | |||
| Operating temperature range at 120 MHz | -40 | 85 | ºC | DC to 120 MHz | 1 | ||
| Operating temperature range at 80 MHz | -40 | 125 | ºC | DC to 80 MHz | 1 | ||
| Maximum operating frequency | 120 | MHz | -40ºC to +85ºC | 1 | |||
| Maximum operating frequency | 80 | MHz | -40ºC to +125ºC | 1 | |||
| 8 MHz internal FRC oscillator tolerance | -4 | 4 | % | -40ºC to +85ºC | 1 | ||
| Internal temperature sensor accuracy | -2 | 2 | ºC | 1 | |||
| 5V-tolerant I/O pin source/sink current | 22 | mA | 1 | ||||
| ADC aggregate sampling rate, 12-bit mode | 25.45 | Msps | Sum of all individual ADC modules, 12-bit mode | 1 | |||
| ADC aggregate sampling rate, 8-bit mode | 33.79 | Msps | Sum of all individual ADC modules, 8-bit mode | 1 | |||
| UART maximum data rate | 25 | Mbps | 1 | ||||
| I2C maximum baud rate | 1 | Mbaud | 1 | ||||
| SPI/I2S SCKx, SDOx, SDIx maximum pin speed | 50 | MHz | 42 | ||||
| REFCLKx maximum pin speed | 50 | MHz | 42 | ||||
| 5V-tolerant pin voltage (remote/unpowered case) | 3.2 | V | VDD < 2.3V, relative to VSS | 41 | |||
| PBCLK6 maximum clock rate to low-power domain peripherals | PBCLK6 | 30 | MHz | Must be configured by user before peripheral access | 168 | ||
| Op amp maximum load capacitance | CLOAD | 32 | pF | High-performance mode, 10 MHz to 100 MHz (CMXCON = 0) | 538 | ||
| ICSP/JTAG series resistor (ESD protection) | 100 | Ohm | ICSP PGECx/PGEDx and JTAG pins; not to exceed | 37 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) | 251 |
CAD (KiCad official)
- Symbol:
PIC32MK0512MCM064-E - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mk0512mcm064-e-pt-etched.step/pic32mk0512mcm064-e-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mk0512mcm064-e-pt.step/pic32mk0512mcm064-e-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (783 pp, sha256
48a2bf8c128b23ed, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC32MK0512MCM064-E
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MK0512MCM064-E from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TCK/RPA7/PWM10H/PWM4L/PMD5/RA7 | bidirectional | JTAG test clock input shared with remappable RPA7, PWM10H/PWM4L, PMP data bit 5 and digital I/O RA7. |
| 2 | RPB14/PWM1H/VBUSON1/PMD6/RB14 | bidirectional | Digital I/O RB14 with remappable RPB14, MCPWM1 high-side output, USB1 VBUS power control output and PMP data bit 6. |
| 3 | RPB15/PWM7H/PWM1L/PMD7/RB15 | bidirectional | Digital I/O RB15 with remappable RPB15, PWM7H/PWM1L outputs and PMP data bit 7. |
| 4 | AN19/CVD19/RPG6/PWM10L/PMA5/RG6 | bidirectional | Digital I/O RG6 with analog input AN19, CVD19, remappable RPG6, PWM10L and PMP address bit 5. |
| 5 | AN18/CVD18/RPG7/PWM10H/SCL1/PMA4/RG7 | bidirectional | Digital I/O RG7 with analog input AN18, CVD18, remappable RPG7, PWM10H, I2C1 clock SCL1 and PMP address bit 4. |
| 6 | AN17/CVD17/RPG8/SDA1/PMA3/RG8 | bidirectional | Digital I/O RG8 with analog input AN17, CVD17, remappable RPG8, I2C1 data SDA1 and PMP address bit 3. |
| 7 | MCLR | input | Master Clear (Reset) Schmitt-trigger input, active-low device Reset, also used for programming and debugging. |
| 8 | AN16/CVD16/RPG9/PMA2/RG9 | bidirectional | Digital I/O RG9 with analog input AN16, CVD16, remappable RPG9 and PMP address bit 2. |
| 9 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 11 | AN10/CVD10/RPA12/RA12 | bidirectional | Digital I/O RA12 with analog input AN10, CVD10 and remappable RPA12. |
| 12 | AN9/CVD9/RPA11/RA11 | bidirectional | Digital I/O RA11 with analog input AN9, CVD9 and remappable RPA11. |
| 13 | OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 | bidirectional | Digital I/O RA0 with op amp 2 output, analog input AN0, comparator 2/4 negative inputs and remappable RPA0. |
| 14 | OA2IN+/AN1/C2IN1+/RPA1/RA1 | bidirectional | Digital I/O RA1 with op amp 2 positive input, analog input AN1, comparator 2 positive input and remappable RPA1. |
| 15 | PGD3/VREF-/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 | bidirectional | Digital I/O RB0 with ICSP data channel 3 (PGD3), VREF- input, op amp 2 negative input, AN2, comparator 2 negative input, RPB0 and CTMU edge input 2. |
| 16 | PGC3/OA1OUT/VREF+/AN3/C1IN4-/C4IN2-/RPB1/CTED1/PMA6/RB1 | bidirectional | Digital I/O RB1 with ICSP clock channel 3 (PGC3), op amp 1 output, VREF+ input, AN3, comparator inputs, RPB1, CTMU edge input 1 and PMP address bit 6. |
| 17 | PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 | bidirectional | Digital I/O RB2 with ICSP clock channel 1 (PGC1), op amp 1 positive input, AN4, comparator inputs and remappable RPB2. |
| 18 | PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 | bidirectional | Digital I/O RB3 with ICSP data channel 1 (PGD1), op amp 1 negative input, AN5, CTMU capacitor input, comparator 1 negative input, RTCC output and RPB3. |
| 19 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, even if the ADC is not used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must be connected at all times, even if the ADC is not used. |
| 21 | OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 | bidirectional | Digital I/O RC0 with op amp 3 output, analog input AN6, CVD6, comparator 3/4 inputs and remappable RPC0. |
| 22 | OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/PMA7/RC1 | bidirectional | Digital I/O RC1 with op amp 3 negative input, AN7, CVD7, comparator 3/4 negative inputs, RPC1 and PMP address bit 7. |
| 23 | OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/FLT3/PMA13/RC2 | bidirectional | Digital I/O RC2 with op amp 3 positive input, AN8, CVD8, comparator 3 inputs, RPC2, PWM fault input FLT3 and PMP address bit 13. |
| 24 | AN11/CVD11/C1IN2-/FLT4/PMA12/RC11 | bidirectional | Digital I/O RC11 with analog input AN11, CVD11, comparator 1 negative input, PWM fault input FLT4 and PMP address bit 12. |
| 25 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 27 | AN12/CVD12/C2IN2-/C5IN2-/SDA4/FLT5/PMA11/RE12 | bidirectional | Digital I/O RE12 with analog input AN12, CVD12, comparator 2/5 negative inputs, I2C4 data SDA4, fault input FLT5 and PMP address bit 11. |
| 28 | AN13/CVD13/C3IN2-/FLT6/SCL4/PMA10/RE13 | bidirectional | Digital I/O RE13 with analog input AN13, CVD13, comparator 3 negative input, fault input FLT6, I2C4 clock SCL4 and PMP address bit 10. |
| 29 | AN14/CVD14/RPE14/FLT7/PMA1/RE14 | bidirectional | Digital I/O RE14 with analog input AN14, CVD14, remappable RPE14, fault input FLT7 and PMP address bit 1. |
| 30 | AN15/CVD15/RPE15/FLT8/PMA0/RE15 | bidirectional | Digital I/O RE15 with analog input AN15, CVD15, remappable RPE15, fault input FLT8 and PMP address bit 0. |
| 31 | TDI/DAC3/AN26/CVD26/RPA8/SDA2/PMA9/RA8 | bidirectional | Digital I/O RA8 with JTAG test data input, 12-bit CDAC3 output, AN26, CVD26, RPA8, I2C2 data SDA2 and PMP address bit 9. |
| 32 | FLT15/RPB4/SCL2/PMA8/RB4 | bidirectional | Digital I/O RB4 with fault input FLT15, remappable RPB4, I2C2 clock SCL2 and PMP address bit 8. |
| 33 | OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/RA4 | bidirectional | Digital I/O RA4 with op amp 5 positive input, 12-bit CDAC1 output, AN24, CVD24, comparator 5 inputs and remappable RPA4. |
| 34 | VBUS | power_in | USB1 bus power monitor analog input; tie to VSS if USB1 is not used. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; must be connected to VDD. |
| 36 | D- | bidirectional | USB1 D- data line; tie through 10k to VSS if USB1 is not used. |
| 37 | D+ | bidirectional | USB1 D+ data line; tie through 10k to VSS if USB1 is not used. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 39 | OSCI/CLKI/AN49/CVD49/RPC12/RC12 | bidirectional | Primary oscillator crystal input or external clock input CLKI, shared with analog input AN49, CVD49, RPC12 and digital I/O RC12. |
| 40 | OSCO/CLKO/RPC15/RC15 | bidirectional | Primary oscillator crystal output or CLKO in FRC and EC modes, shared with RPC15 and digital I/O RC15. |
| 41 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 42 | RD8 | bidirectional | Digital I/O RD8; also listed as the low-power peripheral logic supply pin that must be bypassed with a 1 uF ceramic capacitor. |
| 43 | PGD2/RPB5/SDA3/USBID1/RB5 | bidirectional | Digital I/O RB5 with ICSP data channel 2 (PGD2), remappable RPB5, I2C3 data SDA3 and USB1 OTG ID detect. |
| 44 | PGC2/RPB6/SCL3/SCK2/PMA15/RB6 | bidirectional | Digital I/O RB6 with ICSP clock channel 2 (PGC2), remappable RPB6, I2C3 clock SCL3, SPI2 clock SCK2 and PMP address bit 15. |
| 45 | DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 | bidirectional | Digital I/O RC10 with 12-bit CDAC2 output, AN48, CVD48, remappable RPC10, PMP address bit 14 and chip select. |
| 46 | OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 | bidirectional | Digital I/O RB7 with op amp 5 output, AN25, CVD25, comparator 5 input, RPB7, SPI1 clock SCK1 and external interrupt INT0. |
| 47 | SOSCI/RPC13/RC13 | input | 32.768 kHz secondary oscillator crystal input, with RPC13/RC13 restricted to input functions only. |
| 48 | SOSCO/T1CK/RPB8/RB8 | bidirectional | 32.768 kHz secondary oscillator crystal output, with Timer1 clock input T1CK and RPB8/RB8 restricted to input functions only. |
| 49 | TMS/OA5IN-/AN27/CVD27/LVDIN/C5IN1-/RPB9/RB9 | bidirectional | Digital I/O RB9 with JTAG test mode select, op amp 5 negative input, AN27, CVD27, LVDIN, comparator 5 negative input and RPB9. |
| 50 | TRCLK/RPC6/PWM6H/RC6 | bidirectional | Digital I/O RC6 with trace clock output, remappable RPC6 and MCPWM6 high-side output. |
| 51 | TRD0/RPC7/PWM12H/PWM6L/RC7 | bidirectional | Digital I/O RC7 with trace data bit 0, remappable RPC7 and PWM12H/PWM6L outputs. |
| 52 | TRD1/RPC8/PWM5H/PMWR/RC8 | bidirectional | Digital I/O RC8 with trace data bit 1, remappable RPC8, MCPWM5 high-side output and PMP write strobe. |
| 53 | TRD2/RPD5/PWM12H/PMRD/RD5 | bidirectional | Digital I/O RD5 with trace data bit 2, remappable RPD5, PWM12H and PMP read strobe. |
| 54 | TRD3/RPD6/PWM12L/RD6 | bidirectional | Digital I/O RD6 with trace data bit 3, remappable RPD6 and MCPWM12 low-side output. |
| 55 | RPC9/PWM11H/PWM5L/RC9 | bidirectional | Digital I/O RC9 with remappable RPC9 and PWM11H/PWM5L outputs. |
| 56 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 58 | RPF0/PWM11H/RF0 | bidirectional | Digital I/O RF0 with remappable RPF0 and MCPWM11 high-side output. |
| 59 | RPF1/PWM11L/RF1 | bidirectional | Digital I/O RF1 with remappable RPF1 and MCPWM11 low-side output. |
| 60 | RPB10/PWM3H/PMD0/RB10 | bidirectional | Digital I/O RB10 with remappable RPB10, MCPWM3 high-side output and PMP data bit 0. |
| 61 | RPB11/PWM9H/PWM3L/PMD1/RB11 | bidirectional | Digital I/O RB11 with remappable RPB11, PWM9H/PWM3L outputs and PMP data bit 1. |
| 62 | RPB12/PWM2H/PMD2/RB12 | bidirectional | Digital I/O RB12 with remappable RPB12, MCPWM2 high-side output and PMP data bit 2. |
| 63 | RPB13/PWM8H/PWM2L/CTPLS/PMD3/RB13 | bidirectional | Digital I/O RB13 with remappable RPB13, PWM8H/PWM2L outputs, CTMU pulse output and PMP data bit 3. |
| 64 | TDO/PWM4H/PMD4/RA10 | bidirectional | Digital I/O RA10 with JTAG test data output, MCPWM4 high-side output and PMP data bit 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage operating range (VDD) | | 2.3 | | 3.6 | V | | 1 |
| Operating temperature range at 120 MHz | | -40 | | 85 | ºC | DC to 120 MHz | 1 |
| Operating temperature range at 80 MHz | | -40 | | 125 | ºC | DC to 80 MHz | 1 |
| Maximum operating frequency | | | | 120 | MHz | -40ºC to +85ºC | 1 |
| Maximum operating frequency | | | | 80 | MHz | -40ºC to +125ºC | 1 |
| 8 MHz internal FRC oscillator tolerance | | -4 | | 4 | % | -40ºC to +85ºC | 1 |
| Internal temperature sensor accuracy | | -2 | | 2 | ºC | | 1 |
| 5V-tolerant I/O pin source/sink current | | | | 22 | mA | | 1 |
| ADC aggregate sampling rate, 12-bit mode | | | | 25.45 | Msps | Sum of all individual ADC modules, 12-bit mode | 1 |
| ADC aggregate sampling rate, 8-bit mode | | | | 33.79 | Msps | Sum of all individual ADC modules, 8-bit mode | 1 |
| UART maximum data rate | | | | 25 | Mbps | | 1 |
| I2C maximum baud rate | | | | 1 | Mbaud | | 1 |
| SPI/I2S SCKx, SDOx, SDIx maximum pin speed | | | | 50 | MHz | | 42 |
| REFCLKx maximum pin speed | | | | 50 | MHz | | 42 |
| 5V-tolerant pin voltage (remote/unpowered case) | | | | 3.2 | V | VDD < 2.3V, relative to VSS | 41 |
| PBCLK6 maximum clock rate to low-power domain peripherals | PBCLK6 | | | 30 | MHz | Must be configured by user before peripheral access | 168 |
| Op amp maximum load capacitance | CLOAD | | | 32 | pF | High-performance mode, 10 MHz to 100 MHz (CMXCON<OPLPWR> = 0) | 538 |
| ICSP/JTAG series resistor (ESD protection) | | | | 100 | Ohm | ICSP PGECx/PGEDx and JTAG pins; not to exceed | 37 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | | CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) | 251 |
## CAD (KiCad official)
- Symbol: `PIC32MK0512MCM064-E`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic32mk0512mcm064-e-pt-etched.step` / `pic32mk0512mcm064-e-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic32mk0512mcm064-e-pt.step` / `pic32mk0512mcm064-e-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU32/ProductDocuments/DataSheets/PIC32MK-GPK-MCM-with-CAN-FD-Family-DataSheet-DS60001519E.pdf) (783 pp, sha256 `48a2bf8c128b23ed`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic32mk0512mcm064-e-pt-datasheet.pdf)