Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MK0512MCF064-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MK0512MCF064-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TCK/RPA7/PWM10H/PWM4L/PMD5/RA7 | bidirectional | JTAG test clock input shared with remappable RPA7, PWM10H/PWM4L, PMP data bit 5 and PORTA RA7. |
| 2 | RPB14/PWM1H/VBUSON1/PMD6/RB14 | bidirectional | PORTB RB14 with remappable RPB14, PWM1H output, USB1 VBUS power control output and PMP data bit 6. |
| 3 | RPB15/PWM7H/PWM1L/PMD7/RB15 | bidirectional | PORTB RB15 with remappable RPB15, PWM7H/PWM1L outputs and PMP data bit 7. |
| 4 | AN19/CVD19/RPG6/PMA5/RG6 | bidirectional | Analog input AN19 and capacitive touch CVD19 shared with RPG6, PMP address 5 and PORTG RG6. |
| 5 | AN18/CVD18/RPG7/PMA4/RG7 | bidirectional | Analog input AN18 and CVD18 shared with RPG7, PMP address 4 and RG7; recommended for I2C SCL. |
| 6 | AN17/CVD17/RPG8/PMA3/RG8 | bidirectional | Analog input AN17 and CVD17 shared with RPG8, PMP address 3 and RG8; recommended for I2C SDA. |
| 7 | MCLR | input | Master Clear active-low Reset input, also used for device programming and debugging. |
| 8 | AN16/CVD16/RPG9/PMA2/RG9 | bidirectional | Analog input AN16 and CVD16 shared with RPG9, PMP address 2 and PORTG RG9. |
| 9 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 11 | AN10/CVD10/RPA12/RA12 | bidirectional | Analog input AN10 and CVD10 shared with RPA12 and PORTA RA12. |
| 12 | AN9/CVD9/RPA11/USBOEN1/RA11 | bidirectional | Analog input AN9 and CVD9 shared with RPA11, USBOEN1 and PORTA RA11. |
| 13 | OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 | bidirectional | Op amp 2 output and analog input AN0 with comparator 2/4 negative inputs, RPA0 and RA0. |
| 14 | OA2IN+/AN1/C2IN1+/RPA1/RA1 | bidirectional | Op amp 2 positive input and analog input AN1 with comparator 2 positive input, RPA1 and RA1. |
| 15 | PGD3/VREF-/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 | bidirectional | ICSP data channel 3, ADC voltage reference low input, op amp 2 negative input, AN2, CTMU edge input 2 and RB0. |
| 16 | PGC3/OA1OUT/VREF+/AN3/C1IN4-/C4IN2-/RPB1/CTED1/PMA6/RB1 | bidirectional | ICSP clock channel 3, op amp 1 output, ADC voltage reference high input, AN3, CTMU edge input 1, PMP address 6 and RB1. |
| 17 | PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 | bidirectional | ICSP clock channel 1, op amp 1 positive input, AN4, comparator inputs, RPB2 and RB2. |
| 18 | PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 | bidirectional | ICSP data channel 1, op amp 1 negative input, AN5, CTMU capacitor input, RTCC output, RPB3 and RB3. |
| 19 | AVDD | power_in | Positive supply for analog modules; must be connected at all times even if ADC is unused. |
| 20 | AVSS | power_in | Ground reference for analog modules; must be connected at all times even if ADC is unused. |
| 21 | OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 | bidirectional | Op amp 3 output and analog input AN6/CVD6 with comparator 3/4 inputs, RPC0 and RC0. |
| 22 | OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/PMA7/RC1 | bidirectional | Op amp 3 negative input and analog input AN7/CVD7 with comparator inputs, RPC1, PMP address 7 and RC1. |
| 23 | OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/FLT3/PMA13/RC2 | bidirectional | Op amp 3 positive input and analog input AN8/CVD8 with comparator 3 inputs, RPC2, PWM fault FLT3, PMP address 13 and RC2. |
| 24 | AN11/CVD11/C1IN2-/FLT4/PMA12/RC11 | bidirectional | Analog input AN11/CVD11, comparator 1 negative input, PWM fault FLT4, PMP address 12 and RC11. |
| 25 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 27 | AN12/CVD12/C2IN2-/C5IN2-/FLT5/PMA11/RE12 | bidirectional | Analog input AN12/CVD12, comparator 2/5 negative inputs, FLT5, PMP address 11 and RE12; recommended for I2C SDA. |
| 28 | AN13/CVD13/C3IN2-/FLT6/PMA10/RE13 | bidirectional | Analog input AN13/CVD13, comparator 3 negative input, FLT6, PMP address 10 and RE13; recommended for I2C SCL. |
| 29 | AN14/CVD14/RPE14/FLT7/PMA1/RE14 | bidirectional | Analog input AN14/CVD14 shared with RPE14, PWM fault FLT7, PMP address 1 and RE14. |
| 30 | AN15/CVD15/RPE15/FLT8/PMA0/RE15 | bidirectional | Analog input AN15/CVD15 shared with RPE15, PWM fault FLT8, PMP address 0 and RE15. |
| 31 | TDI/DAC3/AN26/CVD26/RPA8/PMA9/RA8 | bidirectional | JTAG test data input, 12-bit CDAC3 output, AN26/CVD26, RPA8, PMP address 9 and RA8; recommended for I2C SDA. |
| 32 | FLT15/RPB4/PMA8/RB4 | bidirectional | Class B PWM fault input FLT15 shared with RPB4, PMP address 8 and RB4; recommended for I2C SCL. |
| 33 | OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/T1CK/RA4 | bidirectional | Op amp 5 positive input, 12-bit CDAC1 output, AN24/CVD24, comparator 5 inputs, RPA4, Timer1 clock input and RA4. |
| 34 | VBUS | power_in | USB1 bus power monitor analog input; tie to VSS if USB1 is not used. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; must be connected to VDD whether or not USB is used. |
| 36 | D- | bidirectional | USB1 D- data line; connect through 10K to VSS if USB1 is not used. |
| 37 | D+ | bidirectional | USB1 D+ data line; connect through 10K to VSS if USB1 is not used. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 39 | OSCI/CLKI/AN49/CVD49/RPC12/RC12 | bidirectional | Primary oscillator crystal/external clock input shared with AN49/CVD49, RPC12 and RC12. |
| 40 | OSCO/CLKO/RPC15/RC15 | bidirectional | Primary oscillator crystal output or CLKO shared with RPC15 and RC15. |
| 41 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 42 | RD8 | bidirectional | PORTD general purpose I/O RD8 on motor control devices. |
| 43 | PGD2/RPB5/USBID1/RB5 | bidirectional | ICSP data channel 2 shared with RPB5, USB1 OTG ID detect and RB5; recommended for I2C SDA. |
| 44 | PGC2/RPB6/SCK2/PMA15/RB6 | bidirectional | ICSP clock channel 2 shared with RPB6, SPI2 clock, PMP address 15 and RB6; recommended for I2C SCL. |
| 45 | DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 | bidirectional | 12-bit CDAC2 output, AN48/CVD48, RPC10, PMP address 14/chip select and RC10. |
| 46 | OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 | bidirectional | Op amp 5 output, AN25/CVD25, comparator 5 input, RPB7, SPI1 clock, INT0 and RB7. |
| 47 | SOSCI/RPC13/RC13 | input | 32.768 kHz secondary oscillator input shared with RPC13/RC13; restricted to input functions only and slower than standard inputs. |
| 48 | SOSCO/RPB8/RB8 | bidirectional | 32.768 kHz secondary oscillator output shared with RPB8/RB8; restricted to input functions only and slower than standard inputs. |
| 49 | TMS/OA5IN-/AN27/CVD27/C5IN1-/RPB9/RB9 | bidirectional | JTAG test mode select, op amp 5 negative input, AN27/CVD27, comparator 5 input, RPB9 and RB9. |
| 50 | TRCLK/RPC6/PWM6H/RC6 | bidirectional | Trace clock output shared with RPC6, PWM6H and RC6. |
| 51 | TRD0/RPC7/PWM12H/PWM6L/RC7 | bidirectional | Trace data bit 0 shared with RPC7, PWM12H/PWM6L and RC7. |
| 52 | TRD1/RPC8/PWM5H/PMWR/RC8 | bidirectional | Trace data bit 1 shared with RPC8, PWM5H, PMP write strobe and RC8. |
| 53 | TRD2/RPD5/PWM12H/PMRD/RD5 | bidirectional | Trace data bit 2 shared with RPD5, PWM12H, PMP read strobe and RD5. |
| 54 | TRD3/RPD6/PWM12L/RD6 | bidirectional | Trace data bit 3 shared with RPD6, PWM12L and RD6. |
| 55 | RPC9/PWM11H/PWM5L/RC9 | bidirectional | PORTC RC9 with remappable RPC9 and PWM11H/PWM5L outputs. |
| 56 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 58 | RPF0/PWM11H/RF0 | bidirectional | PORTF RF0 with remappable RPF0 and PWM11H output. |
| 59 | RPF1/PWM11L/RF1 | bidirectional | PORTF RF1 with remappable RPF1 and PWM11L output. |
| 60 | RPB10/PWM3H/PMD0/RB10 | bidirectional | PORTB RB10 with remappable RPB10, PWM3H output and PMP data bit 0. |
| 61 | RPB11/PWM9H/PWM3L/PMD1/RB11 | bidirectional | PORTB RB11 with remappable RPB11, PWM9H/PWM3L outputs and PMP data bit 1. |
| 62 | RPB12/PWM2H/PMD2/RB12 | bidirectional | PORTB RB12 with remappable RPB12, PWM2H output and PMP data bit 2. |
| 63 | RPB13/PWM8H/PWM2L/CTPLS/PMD3/RB13 | bidirectional | PORTB RB13 with remappable RPB13, PWM8H/PWM2L outputs, CTMU pulse output and PMP data bit 3. |
| 64 | TDO/PWM4H/PMD4/RA10 | bidirectional | JTAG test data output shared with PWM4H, PMP data bit 4 and RA10. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage operating range | 2.2 | 3.6 | V | Operating Conditions as printed on page 1 | 1 | ||
| Operating temperature, DC to 120 MHz | -40 | 85 | ºC | DC to 120 MHz | 1 | ||
| Operating temperature, DC to 80 MHz | -40 | 125 | ºC | DC to 80 MHz | 1 | ||
| 8 MHz internal FRC oscillator frequency tolerance | -5 | 5 | % | 8 MHz internal FRC oscillator, 0ºC to +70ºC | 1 | ||
| 5V-tolerant pin voltage with VDD below 2.3V | 3.2 | V | 5V tolerant pins, VDD < 2.3V, relative to VSS | 43 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) | 245 |
CAD (KiCad official)
- Symbol:
PIC32MK0512MCF064-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mk0512mcf064-i-etched.step/pic32mk0512mcf064-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mk0512mcf064-i.step/pic32mk0512mcf064-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (724 pp, sha256
8d20d53d4123e666, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).