3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC24HJ128GP502-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC24HJ128GP502-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input, active-low Reset to the device; 5V tolerant, must always be connected and also used for programming/debugging. |
| 2 | AN0/VREF+/CN2/RA0 | bidirectional | Analog input AN0, positive ADC voltage reference input VREF+, change notification CN2 and PORTA I/O RA0. |
| 3 | AN1/VREF-/CN3/RA1 | bidirectional | Analog input AN1, negative ADC voltage reference input VREF-, change notification CN3 and PORTA I/O RA1. |
| 4 | PGED1/AN2/C2IN-/RP0/CN4/RB0 | bidirectional | ICSP data I/O for channel 1, analog input AN2, comparator 2 negative input, remappable pin RP0, change notification CN4 and PORTB I/O RB0. |
| 5 | PGEC1/AN3/C2IN+/RP1/CN5/RB1 | bidirectional | ICSP clock for channel 1, analog input AN3, comparator 2 positive input, remappable pin RP1, change notification CN5 and PORTB I/O RB1. |
| 6 | AN4/C1IN-/RP2/CN6/RB2 | bidirectional | Analog input AN4, comparator 1 negative input, remappable pin RP2, change notification CN6 and PORTB I/O RB2. |
| 7 | AN5/C1IN+/RP3/CN7/RB3 | bidirectional | Analog input AN5, comparator 1 positive input, remappable pin RP3, change notification CN7 and PORTB I/O RB3. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins; must always be connected. |
| 9 | OSC1/CLKI/CN30/RA2 | bidirectional | Oscillator crystal input or external clock source input CLKI, change notification CN30 and PORTA I/O RA2. |
| 10 | OSC2/CLKO/CN29/PMA0/RA3 | bidirectional | Oscillator crystal output or CLKO in RC and EC modes, change notification CN29, PMP address bit 0 and PORTA I/O RA3. |
| 11 | SOSCI/RP4/CN1/PMBE/RB4 | bidirectional | 32.768 kHz secondary oscillator crystal input, remappable pin RP4, change notification CN1, PMP byte enable strobe and PORTB I/O RB4. |
| 12 | SOSCO/T1CK/CN0/PMA1/RA4 | bidirectional | 32.768 kHz secondary oscillator crystal output, Timer1 external clock input T1CK, change notification CN0, PMP address bit 1 and PORTA I/O RA4. |
| 13 | VDD | power_in | Positive supply for peripheral logic and I/O pins (3.0V to 3.6V operating); must always be connected. |
| 14 | PGED3/ASDA1/RP5/CN27/PMD7/RB5 | bidirectional | ICSP data I/O for channel 3, alternate I2C1 data ASDA1, remappable pin RP5, change notification CN27, PMP data bit 7 and PORTB I/O RB5; 5V tolerant. |
| 15 | PGEC3/ASCL1/RP6/CN24/PMD6/RB6 | bidirectional | ICSP clock for channel 3, alternate I2C1 clock ASCL1, remappable pin RP6, change notification CN24, PMP data bit 6 and PORTB I/O RB6; 5V tolerant. |
| 16 | INT0/RP7/CN23/PMD5/RB7 | bidirectional | External interrupt 0, remappable pin RP7, change notification CN23, PMP data bit 5 and PORTB I/O RB7; 5V tolerant. |
| 17 | TCK/SCL1/RP8/CN22/PMD4/RB8 | bidirectional | JTAG test clock input, I2C1 clock SCL1, remappable pin RP8, change notification CN22, PMP data bit 4 and PORTB I/O RB8; 5V tolerant. |
| 18 | TDO/SDA1/RP9/CN21/PMD3/RB9 | bidirectional | JTAG test data output, I2C1 data SDA1, remappable pin RP9, change notification CN21, PMP data bit 3 and PORTB I/O RB9; 5V tolerant. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins; must always be connected. |
| 20 | VCAP | passive | CPU logic filter capacitor connection; requires a low-ESR (<5 Ohm) 4.7 uF to 10 uF capacitor to ground and must not be connected to VDD. |
| 21 | PGED2/TDI/RP10/CN16/PMD2/RB10 | bidirectional | ICSP data I/O for channel 2, JTAG test data input, remappable pin RP10, change notification CN16, PMP data bit 2 and PORTB I/O RB10; 5V tolerant. |
| 22 | PGEC2/TMS/RP11/CN15/PMD1/RB11 | bidirectional | ICSP clock for channel 2, JTAG test mode select, remappable pin RP11, change notification CN15, PMP data bit 1 and PORTB I/O RB11; 5V tolerant. |
| 23 | AN12/RP12/CN14/PMD0/RB12 | bidirectional | Analog input AN12, remappable pin RP12, change notification CN14, PMP data bit 0 and PORTB I/O RB12. |
| 24 | AN11/RP13/CN13/PMRD/RB13 | bidirectional | Analog input AN11, remappable pin RP13, change notification CN13, PMP read strobe and PORTB I/O RB13. |
| 25 | AN10/RTCC/RP14/CN12/PMWR/RB14 | bidirectional | Analog input AN10, real-time clock alarm output RTCC, remappable pin RP14, change notification CN12, PMP write strobe and PORTB I/O RB14. |
| 26 | AN9/RP15/CN11/PMCS1/RB15 | bidirectional | Analog input AN9, remappable pin RP15, change notification CN11, PMP chip select 1 strobe and PORTB I/O RB15. |
| 27 | AVSS | power_in | Ground reference for analog modules; must always be connected regardless of ADC use. |
| 28 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, regardless of ADC use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD range | VDD | 3 | 3.6 | V | Temp -40°C to +85°C (Table 28-1) | 296 | |
| Max MIPS | 40 | MIPS | VDD 3.0-3.6V, -40°C to +85°C (Table 28-1) | 296 | |||
| Operating Junction Temperature Range (Industrial) | TJ | -40 | 125 | °C | Industrial temperature devices (Table 28-2) | 296 | |
| Operating Ambient Temperature Range (Industrial) | TA | -40 | 85 | °C | Industrial temperature devices (Table 28-2) | 296 | |
| Package Thermal Resistance, 28-pin SOIC | θJA | 50 | °C/W | Note 1: junction to ambient, from package simulations (Table 28-3) | 296 |
CAD (KiCad official)
- Symbol:
PIC24HJ128GP502-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic24hj128gp502-i-so-etched.step/pic24hj128gp502-i-so-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24hj128gp502-i-so.step/pic24hj128gp502-i-so.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (390 pp, sha256
9df311052904542e, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).