main
Ray pic24fj64gb002-i-ss: renamed from pic24fj64gb002-i, the part it was built from (PIC24FJ64GB002-I/SS); family listed e08294c

PIC24FJ64GB002-I/SS

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC24FJ64GB002-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Master Clear (device Reset) input; the line is brought low to cause a Reset.
2 RA0 bidirectional PORTA digital I/O with Schmitt Trigger input buffer; shared with AN0, VREF+, C3INC, CTED1, PGED3, VBUSVLD, RP5, ASDA1 and PMD7.
3 RA1 bidirectional PORTA digital I/O with Schmitt Trigger input buffer; shared with AN1, VREF-, C3IND, CTED2, PGEC3, SESSVLD, RP6, ASCL1 and PMD6.
4 RB0 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN2, C2INB, DPH, PGED1, RP0 and PMD0.
5 RB1 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN3, C2INA, DMH, PGEC1, RP1 and PMD1.
6 RB2 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN4, C1INB, DPLN, SDA2, RP2 and PMD2.
7 RB3 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN5, C1INA, DMLN, PMWR, SCL2, RTCC and RP3.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSCI/CLKI/RA2 bidirectional Main oscillator input (ANA) and main clock input; also PORTA digital I/O (RA2), shared with C1IND, CN30, PMCS1 and RP-independent function list per Table 1-2.
10 OSCO/CLKO/RA3 bidirectional Main oscillator output and system clock output (FOSC/2) in applicable oscillator modes; also PORTA digital I/O (RA3), shared with PMA0 and CN29.
11 RB4 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with SOSCI (secondary oscillator/Timer1 clock input), C2IND, CN1, PMBE and RP4.
12 RA4 bidirectional PORTA digital I/O with Schmitt Trigger input buffer; shared with SOSCO (secondary oscillator output), T1CK, C2INC, CN0 and PMA1.
13 VDD power_in Positive supply for peripheral digital logic and I/O pins.
14 RB5 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with TMS (JTAG mode select), USBID (USB OTG ID, OTG mode only) and CN27.
15 VBUS power_in USB voltage in Host mode (5V).
16 RB7 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with INT0 (external interrupt input), TDI, PMD5, CN23 and RP7.
17 RB8 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with SCL1, TCK, USBOEN, PMD4, CN22 and RP8.
18 RB9 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with SDA1, TDO, RCV (USB receive input), PMD3, CN21 and RP9.
19 DISVREG input Voltage regulator disable input (Schmitt Trigger); tie to ground to enable the regulator or to VDD to disable it.
20 VCAP/VDDCORE power_in External filter capacitor connection when the regulator is enabled (low-ESR, under 5 ohms, with 10 uF capacitor to ground) or core logic supply at VDDCORE level when the regulator is disabled.
21 RB10 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with D+ (USB differential plus), VPIO, PGED2, CN16 and RP10.
22 RB11 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with D- (USB differential minus), VMIO, PGEC2, CN15 and RP11.
23 VUSB power_in USB voltage (3.3V) supply.
24 RB13 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN11, C1INC, REFO (reference clock output), PMRD, SESSEND, CN13 and RP13.
25 RB14 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN10, C3INB, CVREF (comparator voltage reference output), VBUSON, VCPCON, CN12 and RP14.
26 RB15 bidirectional PORTB digital I/O with Schmitt Trigger input buffer; shared with AN9, C3INA, VBUSCHG, VBUSST, CN11 and RP15.
27 VSS power_in Ground reference for logic and I/O pins.
28 VDD power_in Positive supply for peripheral digital logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating voltage range 2 3.6 V Standard Operating Conditions (unless otherwise stated) 323
Operating ambient temperature range (Industrial) TA -40 85 °C Industrial 323
Operating junction temperature range TJ -40 140 °C 307
VDDCORE excess over VDD during power-up 0.3 V Regulator not used; while powering up 288
On-chip regulator start-up time (TPM) TPM 10 s 323
Sleep wake-up time 190 s Sleep wake-up with PMSLP = 0 and WUTSEL<1:0> = 11 323

CAD (KiCad official)

  • Symbol: PIC24FJ64GB002-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic24fj64gb002-i-etched.step / pic24fj64gb002-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj64gb002-i.step / pic24fj64gb002-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (352 pp, sha256 11e8e089659c749e, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC24FJ64GB002-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC24FJ64GB002-I/ML