Generated by kicad-footprint-generator · KiCad file format 20260206
PIC24FJ64GA004-I/PT
Microchip Tech · MICROCHIP · TQFP-44(10x10)
PIC24FJ64GA004-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RB9 | bidirectional | PORTB digital I/O RB9, shared with RP9 remappable pin, CN21 change notification, PMD3 and SDA1 (I2C1 data); Schmitt Trigger input and tolerates 5.5V input levels. |
| 2 | RC6 | bidirectional | PORTC digital I/O RC6, shared with RP22 remappable pin, CN18 change notification and PMA1 (Parallel Master Port address bit 1). |
| 3 | RC7 | bidirectional | PORTC digital I/O RC7, shared with RP23 remappable pin, CN17 change notification and PMA0 (Parallel Master Port address bit 0). |
| 4 | RC8 | bidirectional | PORTC digital I/O RC8, shared with RP24 remappable pin, CN20 change notification and PMA5 (PMP address output). |
| 5 | RC9 | bidirectional | PORTC digital I/O RC9, shared with RP25 remappable pin, CN19 change notification and PMA6 (PMP address output). |
| 6 | DISVREG | input | Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it, and always connect directly to one of them. |
| 7 | VDDCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (10 µF low-ESR, not connected to VDD) or core logic supply (VDDCORE level) when the regulator is disabled. |
| 8 | RB10 | bidirectional | PORTB digital I/O RB10, shared with RP10 remappable pin, PGED2 (ICSP data), PMD2 and CN16; tolerates 5.5V input levels. |
| 9 | RB11 | bidirectional | PORTB digital I/O RB11, shared with RP11 remappable pin, PGEC2 (ICSP clock), PMD1 and CN15; tolerates 5.5V input levels. |
| 10 | RB12 | bidirectional | PORTB digital I/O RB12, shared with AN12 analog input, RP12 remappable pin, PMD0 and CN14; as an analog-capable pin it tolerates only VDD input levels. |
| 11 | RB13 | bidirectional | PORTB digital I/O RB13, shared with AN11 analog input, RP13 remappable pin, PMRD (PMP read strobe) and CN13; tolerates only VDD input levels. |
| 12 | RA10 | bidirectional | PORTA digital I/O RA10, shared with PMA10 (PMP address output) and TMS (JTAG test mode select input); tolerates 5.5V input levels. |
| 13 | RA7 | bidirectional | PORTA digital I/O RA7, shared with PMA7 (PMP address output) and TCK (JTAG test clock input); tolerates 5.5V input levels. |
| 14 | RB14 | bidirectional | PORTB digital I/O RB14, shared with AN10 analog input, CVREF comparator reference output, RP14 remappable pin, PMWR (PMP write strobe), RTCC alarm output and CN12; tolerates only VDD input levels. |
| 15 | RB15 | bidirectional | PORTB digital I/O RB15, shared with AN9 analog input, RP15 remappable pin, PMCS1 (PMP chip select 1/address bit 14) and CN11; tolerates only VDD input levels. |
| 16 | AVSS | power_in | Ground reference for analog modules; must always be connected, whether or not analog features are used. |
| 17 | AVDD | power_in | Positive supply for analog modules; must always be connected, whether or not analog features are used. |
| 18 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset and also used for programming and debugging. |
| 19 | RA0 | bidirectional | PORTA digital I/O RA0, shared with AN0 analog input, VREF+ (A/D and comparator high reference input) and CN2; tolerates only VDD input levels. |
| 20 | RA1 | bidirectional | PORTA digital I/O RA1, shared with AN1 analog input, VREF- (A/D and comparator low reference input) and CN3; tolerates only VDD input levels. |
| 21 | RB0 | bidirectional | PORTB digital I/O RB0, shared with AN2 analog input, C2IN- (comparator 2 negative input), PGED1 (ICSP data), RP0 remappable pin and CN4; tolerates only VDD input levels. |
| 22 | RB1 | bidirectional | PORTB digital I/O RB1, shared with AN3 analog input, C2IN+ (comparator 2 positive input), PGEC1 (ICSP clock), RP1 remappable pin and CN5; tolerates only VDD input levels. |
| 23 | RB2 | bidirectional | PORTB digital I/O RB2, shared with AN4 analog input, C1IN- (comparator 1 negative input), SDA2 (I2C2 data), RP2 remappable pin and CN6; tolerates only VDD input levels. |
| 24 | RB3 | bidirectional | PORTB digital I/O RB3, shared with AN5 analog input, C1IN+ (comparator 1 positive input), SCL2 (I2C2 clock), RP3 remappable pin and CN7; tolerates only VDD input levels. |
| 25 | RC0 | bidirectional | PORTC digital I/O RC0, shared with AN6 analog input, RP16 remappable pin and CN8; tolerates only VDD input levels. |
| 26 | RC1 | bidirectional | PORTC digital I/O RC1, shared with AN7 analog input, RP17 remappable pin and CN9; tolerates only VDD input levels. |
| 27 | RC2 | bidirectional | PORTC digital I/O RC2, shared with AN8 analog input, RP18 remappable pin, CN10 and PMA2 (PMP address output); tolerates only VDD input levels. |
| 28 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (device operating range 2.0V to 3.6V). |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSCI | input | Main oscillator input connection, also CLKI main clock input, RA2 digital I/O and CN30 change notification. |
| 31 | OSCO | output | Main oscillator output connection, also CLKO system clock output (FOSC/2), RA3 digital I/O and CN29 change notification. |
| 32 | RA8 | bidirectional | PORTA digital I/O RA8, shared with PMA8 (PMP address output) and TDO (JTAG test data output); tolerates 5.5V input levels. |
| 33 | RB4 | bidirectional | PORTB digital I/O RB4, shared with SOSCI (secondary oscillator/Timer1 clock input), RP4 remappable pin and CN1. |
| 34 | RA4 | bidirectional | PORTA digital I/O RA4, shared with SOSCO (secondary oscillator/Timer1 clock output), T1CK (Timer1 clock input) and CN0. |
| 35 | RA9 | bidirectional | PORTA digital I/O RA9, shared with PMA9 (PMP address output) and TDI (JTAG test data input); tolerates 5.5V input levels. |
| 36 | RC3 | bidirectional | PORTC digital I/O RC3, shared with RP19 remappable pin, PMBE (PMP byte enable strobe) and CN28; tolerates 5.5V input levels. |
| 37 | RC4 | bidirectional | PORTC digital I/O RC4, shared with RP20 remappable pin, PMA4 (PMP address output) and CN25; tolerates 5.5V input levels. |
| 38 | RC5 | bidirectional | PORTC digital I/O RC5, shared with RP21 remappable pin, PMA3 (PMP address output) and CN26; tolerates 5.5V input levels. |
| 39 | VSS | power_in | Ground reference for logic and I/O pins. |
| 40 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (device operating range 2.0V to 3.6V). |
| 41 | RB5 | bidirectional | PORTB digital I/O RB5, shared with RP5 remappable pin, PGED3 (ICSP data), PMD7, ASDA1 (alternate I2C data) and CN27; tolerates 5.5V input levels. |
| 42 | RB6 | bidirectional | PORTB digital I/O RB6, shared with RP6 remappable pin, PGEC3 (ICSP clock), PMD6, ASCL1 (alternate I2C clock) and CN24; tolerates 5.5V input levels. |
| 43 | RB7 | bidirectional | PORTB digital I/O RB7, shared with RP7 remappable pin, INT0 external interrupt input, PMD5 and CN23; tolerates 5.5V input levels. |
| 44 | RB8 | bidirectional | PORTB digital I/O RB8, shared with RP8 remappable pin, SCL1 (I2C1 clock), PMD4 and CN22; tolerates 5.5V input levels. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 135 | °C | 231 | |||
| Storage temperature | -65 | 150 | °C | 231 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 231 | |||
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | -0.3 | V | max printed as VDD + 0.3V | 231 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 231 | |||
| Voltage on VDDCORE with respect to VSS | -0.3 | 3 | V | 231 | |||
| Operating Junction Temperature Range | TJ | -40 | 140 | °C | 233 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 233 | ||
| Package Thermal Resistance, 10x10x1 mm TQFP | JA | 39.3 | °C/W | Note 1: junction to ambient, Theta-JA from package simulation | 233 | ||
| Supply Voltage (regulator enabled) | VDD | 3.6 | V | Regulator enabled | 234 | ||
| Supply Voltage (regulator disabled) | VDD | 3.6 | V | Regulator disabled | 234 | ||
| Core supply voltage | VDDCORE | 2 | 2.75 | V | Regulator disabled | 234 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 234 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s | 234 | ||
| Brown-out Reset Voltage | VBOR | 1.8 | 2.1 | 2.2 | V | 234 | |
| Operating Current (IDD) | IDD | 0.65 | 0.85 | mA | PMD bits set; -40°C; 2.0V; 1 MIPS | 235 | |
| Operating Current (IDD) | IDD | 1.2 | 1.6 | mA | PMD bits set; -40°C; 3.3V; 1 MIPS | 235 | |
| Operating Current (IDD) | IDD | 13.5 | 17.6 | mA | PMD bits set; -40°C; 2.5V; 16 MIPS | 235 | |
| Operating Current (IDD) | IDD | 15 | 20 | mA | PMD bits set; +125°C; 3.3V; 16 MIPS | 235 | |
| Operating Current (IDD) LPRC (31 kHz) | IDD | 40 | 50 | µA | PMD bits set; +125°C; 2.0V | 235 | |
| Operating Current (IDD) LPRC (31 kHz) | IDD | 120 | 260 | µA | PMD bits set; +125°C; 3.3V | 235 | |
| Idle Current (IIDLE) Core Off, Clock On Base Current | IIDLE | 150 | 200 | µA | PMD bits set; -40°C; 2.0V; 1 MIPS | 236 | |
| Idle Current (IIDLE) Core Off, Clock On Base Current | IIDLE | 275 | 360 | µA | PMD bits set; +125°C; 3.3V; 1 MIPS | 236 | |
| Idle Current (IIDLE) Core Off, Clock On Base Current | IIDLE | 3.3 | 4.4 | mA | PMD bits set; +125°C; 2.5V; 16 MIPS | 236 | |
| Power-Down Current (IPD) Base | IPD | 0.1 | 1 | µA | PMD bits set, PMSLP bit 0; -40°C; 2.0V | 238 | |
| Power-Down Current (IPD) Base | IPD | 36 | 120 | µA | PMD bits set, PMSLP bit 0; +125°C; 3.3V | 238 | |
| Watchdog Timer Current IWDT (additional) | IWDT | 3.5 | 6 | µA | +125°C; 2.0V | 238 | |
| I/O Pins with SMBus Buffer input low voltage | VIL | 0.8 | V | SMBus enabled | 240 | ||
| I/O Pins with SMBus Buffer input high voltage, digital only | VIH | 2.1 | 5.5 | V | SMBus enabled; 2.5V <= VPIN <= VDD | 240 | |
| CNxx Pull-up Current | ICNPU | 50 | 250 | 400 | µA | AVDD = 3.3V, VPIN = VSS | 240 |
| Maximum Load Current for Digital High Detection with Internal Pull-up | IPU | 30 | µA | VDD = 2.0V | 241 | ||
| Maximum Load Current for Digital High Detection with Internal Pull-up | IPU | 100 | µA | VDD = 3.3V | 241 | ||
| Input Leakage Current I/O Ports | IIL | 1 | µA | AVSS <= VPIN <= VDD, pin at high-impedance | 241 | ||
| Input Leakage Current Analog Input Pins | IIL | 1 | µA | AVSS <= VPIN <= VDD, pin at high-impedance | 241 | ||
| Input Leakage Current MCLR | IIL | 1 | µA | AVSS <= VPIN <= VDD | 241 | ||
| Input Low Injection Current | IICL | 0 | -5 | mA | All pins except VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS | 241 | |
| Input High Injection Current | IICH | 0 | 5 | mA | All pins except VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS, and all 5V tolerant pins | 241 | |
| Total Input Injection Current (sum of all I/O and control pins) | IICT | -20 | 20 | mA | Absolute instantaneous sum of all input injection currents from all I/O pins | 241 | |
| All I/O Pins Output Low Voltage | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 242 | ||
| All I/O Pins Output High Voltage | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 242 | ||
| All I/O Pins Output High Voltage | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 242 | ||
| Cell Endurance | EP | 10000 | E/W | -40C to +125C | 242 | ||
| VDD for Read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 242 | ||
| VDDCORE for Self-Timed Write | VPEW | 2.25 | 2.75 | V | 242 | ||
| Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 242 | ||
| External Filter Capacitor Value | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 243 | |
| Self-Timed Write Cycle Time | TIW | 3 | ms | 242 | |||
| Regulator Output Voltage | VRGOUT | 2.5 | V | 243 |
CAD (KiCad official)
- Symbol:
PIC24FJ64GA004-I - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj64ga004-i-etched.step/pic24fj64ga004-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj64ga004-i.step/pic24fj64ga004-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (278 pp, sha256
67fd2ef41e1a2d3f, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC24FJ64GA004-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC24FJ64GA004-I/ML