Generated by kicad-footprint-generator · KiCad file format 20260206
PIC24FJ64GA002T-I/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC24FJ64GA002T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGED1/AN2/C2IN-/RP0/CN4/RB0 | bidirectional | PORTB digital I/O RB0 with ICSP/debug data (PGED1), A/D input AN2, Comparator 2 negative input, remappable pin RP0 and change notification CN4. |
| 2 | PGEC1/AN3/C2IN+/RP1/CN5/RB1 | bidirectional | PORTB digital I/O RB1 with ICSP/debug clock (PGEC1), A/D input AN3, Comparator 2 positive input, remappable pin RP1 and change notification CN5. |
| 3 | AN4/C1IN-/RP2/SDA2/CN6/RB2 | bidirectional | PORTB digital I/O RB2 with A/D input AN4, Comparator 1 negative input, remappable pin RP2, I2C2 data (SDA2) and change notification CN6. |
| 4 | AN5/C1IN+/RP3/SCL2/CN7/RB3 | bidirectional | PORTB digital I/O RB3 with A/D input AN5, Comparator 1 positive input, remappable pin RP3, I2C2 clock (SCL2) and change notification CN7. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | OSCI/CLKI/CN30/RA2 | bidirectional | Main oscillator input / main clock input connection, also PORTA digital I/O RA2 and change notification CN30. |
| 7 | OSCO/CLKO/CN29/RA3 | bidirectional | Main oscillator output / system clock output, also PORTA digital I/O RA3, PMP address bit PMA0 and change notification CN29. |
| 8 | SOSCI/RP4/PMBE/CN1/RB4 | bidirectional | Secondary oscillator/Timer1 clock input, also PORTB I/O RB4, remappable pin RP4, PMP byte enable strobe (PMBE) and change notification CN1. |
| 9 | SOSCO/T1CK/CN0/RA4 | bidirectional | Secondary oscillator/Timer1 clock output, also Timer1 clock input T1CK, PORTA I/O RA4, PMP address bit PMA1 and change notification CN0. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 11 | PGED3/ASDA1/RP5/PMD7/CN27/RB5 | bidirectional | PORTB digital I/O RB5 with alternate ICSP/debug data (PGED3), alternate I2C1 data (ASDA1), remappable pin RP5, PMP data bit PMD7 and change notification CN27. |
| 12 | PGEC3/ASCL1/RP6/PMD6/CN24/RB6 | bidirectional | PORTB digital I/O RB6 with alternate ICSP/debug clock (PGEC3), alternate I2C1 clock (ASCL1), remappable pin RP6, PMP data bit PMD6 and change notification CN24. |
| 13 | INT0/RP7/PMD5/CN23/RB7 | bidirectional | PORTB digital I/O RB7 with external interrupt input INT0, remappable pin RP7, PMP data bit PMD5 and change notification CN23. |
| 14 | TCK/SCL1/RP8/PMD4/CN22/RB8 | bidirectional | PORTB digital I/O RB8 with JTAG test clock input (TCK), I2C1 clock (SCL1), remappable pin RP8, PMP data bit PMD4 and change notification CN22. |
| 15 | TDO/SDA1/RP9/PMD3/CN21/RB9 | bidirectional | PORTB digital I/O RB9 with JTAG test data output (TDO), I2C1 data (SDA1), remappable pin RP9, PMP data bit PMD3 and change notification CN21. |
| 16 | DISVREG | input | Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it. |
| 17 | VDDCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (10 µF, low ESR, not tied to VDD), or core logic supply when the regulator is disabled. |
| 18 | TDI/PGED2/RP10/PMD2/CN16/RB10 | bidirectional | PORTB digital I/O RB10 with JTAG test data input (TDI), ICSP/debug data (PGED2), remappable pin RP10, PMP data bit PMD2 and change notification CN16. |
| 19 | TMS/PGEC2/RP11/PMD1/CN15/RB11 | bidirectional | PORTB digital I/O RB11 with JTAG test mode select (TMS), ICSP/debug clock (PGEC2), remappable pin RP11, PMP data bit PMD1 and change notification CN15. |
| 20 | AN12/RP12/PMD0/CN14/RB12 | bidirectional | PORTB digital I/O RB12 with A/D input AN12, remappable pin RP12, PMP data bit PMD0 and change notification CN14. |
| 21 | AN11/RP13/PMRD/CN13/RB13 | bidirectional | PORTB digital I/O RB13 with A/D input AN11, remappable pin RP13, PMP read strobe (PMRD) and change notification CN13. |
| 22 | AN10/CVREF/RP14/PMWR/RTCC/CN12/RB14 | bidirectional | PORTB digital I/O RB14 with A/D input AN10, comparator voltage reference output (CVREF), remappable pin RP14, PMP write strobe (PMWR), RTCC alarm output and change notification CN12. |
| 23 | AN9/RP15/PMCS1/CN11/RB15 | bidirectional | PORTB digital I/O RB15 with A/D input AN9, remappable pin RP15, PMP chip select 1 strobe (PMCS1) and change notification CN11. |
| 24 | VSS | power_in | Ground reference for logic and I/O pins. |
| 25 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 26 | MCLR | input | Master Clear (device Reset) input, Schmitt Trigger; brought low to cause a Reset. |
| 27 | AN0/VREF+/CN2/RA0 | bidirectional | PORTA digital I/O RA0 with A/D input AN0, A/D and comparator high reference voltage input (VREF+) and change notification CN2. |
| 28 | AN1/VREF-/CN3/RA1 | bidirectional | PORTA digital I/O RA1 with A/D input AN1, A/D and comparator low reference voltage input (VREF-) and change notification CN3. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 135 | °C | 231 | |||
| Storage temperature | -65 | 150 | °C | 231 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 231 | ||
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | -0.3 | V | Printed maximum is VDD + 0.3V | 231 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 231 | |||
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | 3 | V | 231 | ||
| Operating Junction Temperature Range | TJ | -40 | 140 | °C | 233 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 233 | ||
| Package Thermal Resistance, 6x6x0.9 mm QFN (junction to ambient) | θJA | 33.7 | °C/W | Note 1: junction to ambient, package simulation | 233 | ||
| Supply Voltage (regulator enabled) | VDD | 3.6 | V | Regulator enabled | 234 | ||
| Supply Voltage (regulator disabled) | VDD | 3.6 | V | Regulator disabled | 234 | ||
| Supply Voltage VDDCORE | VDDCORE | 2 | 2.75 | V | Regulator disabled | 234 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 234 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 234 | ||
| Brown-out Reset Voltage | VBOR | 1.8 | 2.1 | 2.2 | V | 234 | |
| Operating Current (IDD) 2.0V 1 MIPS -40°C | IDD | 0.65 | 0.85 | mA | PMD bits set; 2.0V; 1 MIPS; -40°C | 235 | |
| Operating Current (IDD) 2.0V 1 MIPS +85°C | IDD | 0.65 | 0.85 | mA | PMD bits set; 2.0V; 1 MIPS; +85°C | 235 | |
| Operating Current (IDD) 3.3V 1 MIPS -40°C | IDD | 1.2 | 1.6 | mA | PMD bits set; 3.3V; 1 MIPS; -40°C | 235 | |
| Operating Current (IDD) 3.3V 1 MIPS +85°C | IDD | 1.2 | 1.6 | mA | PMD bits set; 3.3V; 1 MIPS; +85°C | 235 | |
| Operating Current (IDD) 2.5V 16 MIPS -40°C | IDD | 13.5 | 17.6 | mA | PMD bits set; 2.5V; 16 MIPS; -40°C | 235 | |
| Operating Current (IDD) 2.5V 16 MIPS +85°C | IDD | 13.5 | 17.6 | mA | PMD bits set; 2.5V; 16 MIPS; +85°C | 235 | |
| Operating Current (IDD) 3.3V 16 MIPS -40°C | IDD | 15 | 20 | mA | PMD bits set; 3.3V; 16 MIPS; -40°C | 235 | |
| Idle Current (IIDLE) 2.0V 1 MIPS -40°C | IIDLE | 150 | 200 | µA | Core off, clock on base current; PMD bits set; 2.0V; 1 MIPS; -40°C | 236 | |
| Idle Current (IIDLE) 2.0V 1 MIPS +85°C | IIDLE | 150 | 200 | µA | Core off, clock on base current; PMD bits set; 2.0V; 1 MIPS; +85°C | 236 | |
| Power-Down Current (IPD) 2.0V -40°C | IPD | 0.1 | 1 | µA | PMD bits set, PMSLP bit 0; 2.0V; -40°C | 238 | |
| Power-Down Current (IPD) 2.0V +85°C | IPD | 3.7 | 12 | µA | PMD bits set, PMSLP bit 0; 2.0V; +85°C | 238 | |
| Power-Down Current (IPD) 3.3V +85°C | IPD | 9 | 30 | µA | PMD bits set, PMSLP bit 0; 3.3V; +85°C | 238 | |
| Watchdog Timer Current (IWDT) 2.0V -40°C | IWDT | 1.75 | 3 | µA | 2.0V; -40°C | 238 | |
| Watchdog Timer Current (IWDT) 2.0V +85°C | IWDT | 1.75 | 3 | µA | 2.0V; +85°C | 238 | |
| Change Notification pull-up current | ICNPU | 50 | 250 | 400 | µA | AVDD = 3.3V, VPIN = VSS | 240 |
| Maximum Load Current for Digital High Detection with Internal Pull-up 2.0V | IPU | 30 | µA | VDD = 2.0V | 241 | ||
| Maximum Load Current for Digital High Detection with Internal Pull-up 3.3V | IPU | 100 | µA | VDD = 3.3V | 241 | ||
| Input Leakage Current I/O Ports | IIL | 1 | µA | AVSS <= VPIN <= VDD, Pin at high-impedance | 241 | ||
| Total Input Injection Current | IICT | -20 | 20 | mA | Absolute instantaneous sum of all ± input injection currents from all I/O pins | 241 | |
| Output Low Voltage All I/O Pins 3.6V | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 242 | ||
| Output Low Voltage All I/O Pins 2.0V | VOL | 0.4 | V | IOL = 5.0 mA, VDD = 2.0V | 242 | ||
| Output High Voltage All I/O Pins 3.6V | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 242 | ||
| Output High Voltage All I/O Pins 2.0V | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 242 | ||
| Cell Endurance | EP | 10000 | E/W | -40C to +125C | 242 | ||
| VDD for Read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 242 | ||
| VDDCORE for Self-Timed Write | VPEW | 2.25 | 2.75 | V | 242 | ||
| Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 242 | ||
| Input Offset Voltage | VIOFF | 10 | 30 | mV | 243 | ||
| Common-Mode Rejection Ratio | CMRR | 55 | dB | 243 | |||
| Comparator Response Time | TRESP | 150 | 400 | ns | 243 | ||
| Comparator Mode Change to Output Valid | TMC2OV | 10 | µs | 243 | |||
| External Filter Capacitor Value | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 243 | |
| Internal FRC @ 8 MHz accuracy +25°C | F20 | -2 | 2 | % | +25°C | 246 | |
| LPRC @ 31 kHz accuracy +25°C | F21 | -15 | 15 | % | +25°C | 246 | |
| Instruction Cycle Time | TCY | 62.5 | ns | 245 | |||
| External Clock In (OSCI) Rise or Fall Time | TosR,TosF | 20 | ns | EC | 245 | ||
| Internal voltage reference input current | IVREF | 1.25 | mA | Measured during conversion, 3.3V, +25°C | 248 | ||
| Integral Nonlinearity | INL | -2 | 1 | 2 | LSb | VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3V | 248 |
| A/D Throughput Rate | FCNV | 500 | ksps | AVDD >= 2.7V | 249 |
CAD (KiCad official)
- Symbol:
PIC24FJ64GA002T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic24fj64ga002t-i-etched.step/pic24fj64ga002t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj64ga002t-i.step/pic24fj64ga002t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (278 pp, sha256
67fd2ef41e1a2d3f, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC24FJ64GA002T-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC24FJ64GA002T-I/SO
- PIC24FJ64GA002T-I/SS