main
Ray
Publish 0.1.0
a2bed18
PIC24FJ64GA002-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC24FJ64GA002-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset. |
| 2 | AN0/VREF+/CN2/RA0 | bidirectional | PORTA digital I/O (ST) shared with A/D analog input AN0, A/D and comparator high reference VREF+, and interrupt-on-change CN2. |
| 3 | AN1/VREF-/CN3/RA1 | bidirectional | PORTA digital I/O (ST) shared with A/D analog input AN1, A/D and comparator low reference VREF-, and interrupt-on-change CN3. |
| 4 | RB0/RP0/AN2/C2IN-/PGED1/CN4 | bidirectional | PORTB I/O with remappable RP0, analog input AN2, Comparator 2 negative input, ICSP/debug data PGED1 and CN4. |
| 5 | RB1/RP1/AN3/C2IN+/PGEC1/CN5 | bidirectional | PORTB I/O with remappable RP1, analog input AN3, Comparator 2 positive input, ICSP/debug clock PGEC1 and CN5. |
| 6 | RB2/RP2/AN4/C1IN-/SDA2/CN6 | bidirectional | PORTB I/O with remappable RP2, analog input AN4, Comparator 1 negative input, I2C2 data SDA2 and CN6. |
| 7 | RB3/RP3/AN5/C1IN+/SCL2/CN7 | bidirectional | PORTB I/O with remappable RP3, analog input AN5, Comparator 1 positive input, I2C2 clock SCL2 and CN7. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSCI/CLKI/CN30/RA2 | bidirectional | PORTA I/O shared with main oscillator input OSCI, main clock input CLKI and CN30. |
| 10 | OSCO/CLKO/CN29/PMA0/RA3 | bidirectional | PORTA I/O shared with main oscillator output OSCO, system clock output CLKO, Parallel Master Port address bit PMA0 and CN29. |
| 11 | SOSCI/RP4/PMBE/CN1/RB4 | bidirectional | PORTB I/O with remappable RP4, secondary oscillator/Timer1 clock input SOSCI, PMP byte enable strobe PMBE and CN1. |
| 12 | RA4/SOSCO/T1CK/PMA1/CN0 | bidirectional | PORTA I/O shared with secondary oscillator output SOSCO, Timer1 clock T1CK, PMP address bit PMA1 and CN0. |
| 13 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 14 | RB5/RP5/PMD7/ASDA1/PGEC3/CN27 | bidirectional | PORTB I/O with remappable RP5, PMP data bit PMD7, alternate I2C1 data ASDA1, ICSP/debug clock PGEC3 and CN27. |
| 15 | RB6/RP6/PMD6/ASCL1/PGED3/CN24 | bidirectional | PORTB I/O with remappable RP6, PMP data bit PMD6, alternate I2C1 clock ASCL1, ICSP/debug data PGED3 and CN24. |
| 16 | RB7/RP7/INT0/PMD5/CN23 | bidirectional | PORTB I/O with remappable RP7, external interrupt input INT0, PMP data bit PMD5 and CN23. |
| 17 | RB8/RP8/SCL1/PMD4/TCK/CN22 | bidirectional | PORTB I/O with remappable RP8, I2C1 clock SCL1, PMP data bit PMD4, JTAG test clock input TCK and CN22. |
| 18 | RB9/RP9/SDA1/PMD3/TDO/CN21 | bidirectional | PORTB I/O with remappable RP9, I2C1 data SDA1, PMP data bit PMD3, JTAG test data output TDO and CN21. |
| 19 | DISVREG | input | Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it. |
| 20 | VDDCAP/VDDCORE | power_in | External filter capacitor connection when regulator is enabled (10 µF, low ESR to ground, not to VDD), or core logic supply when regulator is disabled. |
| 21 | RB10/RP10/PMD2/PGED2/TDI/CN16 | bidirectional | PORTB I/O with remappable RP10, PMP data bit PMD2, ICSP/debug data PGED2, JTAG test data input TDI and CN16. |
| 22 | RB11/RP11/PMD1/PGEC2/TMS/CN15 | bidirectional | PORTB I/O with remappable RP11, PMP data bit PMD1, ICSP/debug clock PGEC2, JTAG test mode select TMS and CN15. |
| 23 | RB12/RP12/AN12/PMD0/CN14 | bidirectional | PORTB I/O with remappable RP12, analog input AN12, PMP data bit PMD0 and CN14. |
| 24 | RB13/RP13/AN11/PMRD/CN13 | bidirectional | PORTB I/O with remappable RP13, analog input AN11, PMP read strobe PMRD and CN13. |
| 25 | RB14/RP14/AN10/CVREF/PMWR/RTCC/CN12 | bidirectional | PORTB I/O with remappable RP14, analog input AN10, comparator voltage reference output CVREF, PMP write strobe PMWR, RTCC alarm output and CN12. |
| 26 | RB15/RP15/AN9/PMCS1/CN11 | bidirectional | PORTB I/O with remappable RP15, analog input AN9, PMP chip select 1 strobe PMCS1 and CN11. |
| 27 | VSS | power_in | Ground reference for logic and I/O pins. |
| 28 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 135 | °C | 231 | |||
| Storage temperature | -65 | 150 | °C | 231 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 231 | ||
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | -0.3 | V | Maximum printed as VDD + 0.3V | 231 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 231 | |||
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | 3 | V | 231 | ||
| Operating junction temperature range | TJ | -40 | 140 | °C | 233 | ||
| Operating ambient temperature range (industrial) | TA | -40 | 85 | °C | Industrial | 234 | |
| Supply voltage VDD, regulator enabled | VDD | 3.6 | V | Regulator enabled | 234 | ||
| Supply voltage VDD, regulator disabled | VDD | 3.6 | V | Regulator disabled | 234 | ||
| Core supply voltage VDDCORE, regulator disabled | VDDCORE | 2 | 2.75 | V | Regulator disabled | 234 | |
| Standard operating voltage | VDD | 2 | 3.6 | V | Standard Operating Conditions: 2.0V to 3.6V | 234 | |
| RAM data retention voltage | VDR | 1.5 | V | 234 | |||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s | 234 | ||
| Brown-out Reset voltage | VBOR | 1.8 | 2.1 | 2.2 | V | 234 | |
| Operating current IDD, 2.0V, 1 MIPS | IDD | 0.65 | 0.85 | mA | 2.0V, 1 MIPS, +85°C | 235 | |
| Operating current IDD, 3.3V, 1 MIPS | IDD | 1.2 | 1.6 | mA | 3.3V, 1 MIPS, +85°C | 235 | |
| Operating current IDD, 3.3V, 4 MIPS | IDD | 4.1 | 5.4 | mA | 3.3V, 4 MIPS, +85°C | 235 | |
| Operating current IDD, 3.3V, 16 MIPS | IDD | 15 | 20 | mA | 3.3V, 16 MIPS, +85°C | 235 | |
| Operating current IDD, 3.3V, LPRC (31 kHz) | IDD | 95 | 124 | A | 3.3V, LPRC (31 kHz), +85°C | 235 | |
| Idle current IIDLE, 3.3V, 4 MIPS | IIDLE | 0.82 | 1.1 | mA | 3.3V, 4 MIPS, +85°C | 236 | |
| Idle current IIDLE, 3.3V, LPRC (31 kHz) | IIDLE | 70 | 91 | A | 3.3V, LPRC (31 kHz), +85°C | 237 | |
| Power-down current IPD, 2.5V | IPD | 4.2 | 25 | A | 2.5V, +85°C | 238 | |
| Power-down current IPD, 3.3V | IPD | 9 | 30 | A | 3.3V, +85°C | 238 | |
| Watchdog Timer current IWDT, 3.3V | IWDT | 2.8 | 5 | A | 3.3V, +85°C | 238 | |
| Input low voltage I/O pins | VIL | 0.2 | VDD | I/O pins | 240 | ||
| Input low voltage I/O pins with I2C buffer | VIL | 0.3 | VDD | SMBus disabled | 240 | ||
| Input high voltage I/O pins with analog functions | VIH | 0.8 | VDD | I/O pins with analog functions | 240 | ||
| Input high voltage MCLR | VIH | 0.8 | VDD | MCLR | 240 | ||
| CNxx pull-up current | ICNPU | 50 | 250 | 400 | A | AVDD = 3.3V, VPIN = VSS | 240 |
| Maximum load current for digital high detection with internal pull-up | IPU | 30 | A | VDD = 2.0V | 241 | ||
| Maximum load current for digital high detection with internal pull-up | IPU | 100 | A | VDD = 3.3V | 241 | ||
| Input leakage current I/O ports | IIL | 1 | A | AVSS ≤ VPIN ≤ VDD, pin at high-impedance | 241 | ||
| Input low injection current | IICL | 0 | -5 | mA | Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS | 241 | |
| Input high injection current | IICH | 0 | 5 | mA | Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS, and all 5V tolerant pins | 241 | |
| Total input injection current | IICT | -20 | 20 | mA | Absolute instantaneous sum of all ± input injection currents from all I/O pins | 241 | |
| Output low voltage all I/O pins | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 242 | ||
| Output high voltage all I/O pins | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 242 | ||
| Output high voltage all I/O pins | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 242 | ||
| Program Flash cell endurance | EP | 10000 | E/W | -40C to +125C | 242 | ||
| VDD for read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 242 | ||
| VDDCORE for self-timed write | VPEW | 2.25 | 2.75 | V | 242 | ||
| Characteristic retention | TRETD | 20 | Year | Provided no other specifications are violated | 242 | ||
| External filter capacitor value | CEFC | 4.7 | 10 | F | Series resistance < 3 Ohm recommended; < 5 Ohm required | 243 | |
| Voltage regulator start-up time | TVREG | 10 | s | POR, BOR or when PMSLP = 1 | 243 | ||
| Power-up timer period | TPWRT | 64 | ms | DISVREG = VDD | 243 | ||
| Oscillator frequency HS | FOSC | 10 | 32 | MHz | HS, -40°C ≤ TA ≤ +85°C | 245 | |
| Oscillator frequency SOSC | FOSC | 31 | 33 | kHz | SOSC | 245 | |
| PLL output frequency range FSYS | FSYS | 8 | 32 | MHz | -40°C ≤ TA ≤ +85°C | 246 | |
| Instruction cycle time TCY | TCY | 62.5 | ns | 245 | |||
| Internal FRC accuracy @ 8 MHz | -2 | 2 | % | +25°C | 246 | ||
| LPRC accuracy @ 31 kHz | -15 | 15 | % | +25°C | 246 | ||
| A/D clock period TAD | TAD | 75 | ns | TCY = 75 ns, AD1CON3 in default state | 249 |
CAD (KiCad official)
- Symbol:
PIC24FJ64GA002-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic24fj64ga002-i-etched.step/pic24fj64ga002-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj64ga002-i.step/pic24fj64ga002-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (278 pp, sha256
67fd2ef41e1a2d3f, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC24FJ64GA002-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC24FJ64GA002-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset. |
| 2 | AN0/VREF+/CN2/RA0 | bidirectional | PORTA digital I/O (ST) shared with A/D analog input AN0, A/D and comparator high reference VREF+, and interrupt-on-change CN2. |
| 3 | AN1/VREF-/CN3/RA1 | bidirectional | PORTA digital I/O (ST) shared with A/D analog input AN1, A/D and comparator low reference VREF-, and interrupt-on-change CN3. |
| 4 | RB0/RP0/AN2/C2IN-/PGED1/CN4 | bidirectional | PORTB I/O with remappable RP0, analog input AN2, Comparator 2 negative input, ICSP/debug data PGED1 and CN4. |
| 5 | RB1/RP1/AN3/C2IN+/PGEC1/CN5 | bidirectional | PORTB I/O with remappable RP1, analog input AN3, Comparator 2 positive input, ICSP/debug clock PGEC1 and CN5. |
| 6 | RB2/RP2/AN4/C1IN-/SDA2/CN6 | bidirectional | PORTB I/O with remappable RP2, analog input AN4, Comparator 1 negative input, I2C2 data SDA2 and CN6. |
| 7 | RB3/RP3/AN5/C1IN+/SCL2/CN7 | bidirectional | PORTB I/O with remappable RP3, analog input AN5, Comparator 1 positive input, I2C2 clock SCL2 and CN7. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSCI/CLKI/CN30/RA2 | bidirectional | PORTA I/O shared with main oscillator input OSCI, main clock input CLKI and CN30. |
| 10 | OSCO/CLKO/CN29/PMA0/RA3 | bidirectional | PORTA I/O shared with main oscillator output OSCO, system clock output CLKO, Parallel Master Port address bit PMA0 and CN29. |
| 11 | SOSCI/RP4/PMBE/CN1/RB4 | bidirectional | PORTB I/O with remappable RP4, secondary oscillator/Timer1 clock input SOSCI, PMP byte enable strobe PMBE and CN1. |
| 12 | RA4/SOSCO/T1CK/PMA1/CN0 | bidirectional | PORTA I/O shared with secondary oscillator output SOSCO, Timer1 clock T1CK, PMP address bit PMA1 and CN0. |
| 13 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 14 | RB5/RP5/PMD7/ASDA1/PGEC3/CN27 | bidirectional | PORTB I/O with remappable RP5, PMP data bit PMD7, alternate I2C1 data ASDA1, ICSP/debug clock PGEC3 and CN27. |
| 15 | RB6/RP6/PMD6/ASCL1/PGED3/CN24 | bidirectional | PORTB I/O with remappable RP6, PMP data bit PMD6, alternate I2C1 clock ASCL1, ICSP/debug data PGED3 and CN24. |
| 16 | RB7/RP7/INT0/PMD5/CN23 | bidirectional | PORTB I/O with remappable RP7, external interrupt input INT0, PMP data bit PMD5 and CN23. |
| 17 | RB8/RP8/SCL1/PMD4/TCK/CN22 | bidirectional | PORTB I/O with remappable RP8, I2C1 clock SCL1, PMP data bit PMD4, JTAG test clock input TCK and CN22. |
| 18 | RB9/RP9/SDA1/PMD3/TDO/CN21 | bidirectional | PORTB I/O with remappable RP9, I2C1 data SDA1, PMP data bit PMD3, JTAG test data output TDO and CN21. |
| 19 | DISVREG | input | Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it. |
| 20 | VDDCAP/VDDCORE | power_in | External filter capacitor connection when regulator is enabled (10 µF, low ESR to ground, not to VDD), or core logic supply when regulator is disabled. |
| 21 | RB10/RP10/PMD2/PGED2/TDI/CN16 | bidirectional | PORTB I/O with remappable RP10, PMP data bit PMD2, ICSP/debug data PGED2, JTAG test data input TDI and CN16. |
| 22 | RB11/RP11/PMD1/PGEC2/TMS/CN15 | bidirectional | PORTB I/O with remappable RP11, PMP data bit PMD1, ICSP/debug clock PGEC2, JTAG test mode select TMS and CN15. |
| 23 | RB12/RP12/AN12/PMD0/CN14 | bidirectional | PORTB I/O with remappable RP12, analog input AN12, PMP data bit PMD0 and CN14. |
| 24 | RB13/RP13/AN11/PMRD/CN13 | bidirectional | PORTB I/O with remappable RP13, analog input AN11, PMP read strobe PMRD and CN13. |
| 25 | RB14/RP14/AN10/CVREF/PMWR/RTCC/CN12 | bidirectional | PORTB I/O with remappable RP14, analog input AN10, comparator voltage reference output CVREF, PMP write strobe PMWR, RTCC alarm output and CN12. |
| 26 | RB15/RP15/AN9/PMCS1/CN11 | bidirectional | PORTB I/O with remappable RP15, analog input AN9, PMP chip select 1 strobe PMCS1 and CN11. |
| 27 | VSS | power_in | Ground reference for logic and I/O pins. |
| 28 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 135 | °C | | 231 |
| Storage temperature | | -65 | | 150 | °C | | 231 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 4 | V | | 231 |
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | | -0.3 | | | V | Maximum printed as VDD + 0.3V | 231 |
| Voltage on any digital only pin with respect to VSS | | -0.3 | | 6 | V | | 231 |
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | | 3 | V | | 231 |
| Operating junction temperature range | TJ | -40 | | 140 | °C | | 233 |
| Operating ambient temperature range (industrial) | TA | -40 | | 85 | °C | Industrial | 234 |
| Supply voltage VDD, regulator enabled | VDD | | | 3.6 | V | Regulator enabled | 234 |
| Supply voltage VDD, regulator disabled | VDD | | | 3.6 | V | Regulator disabled | 234 |
| Core supply voltage VDDCORE, regulator disabled | VDDCORE | 2 | | 2.75 | V | Regulator disabled | 234 |
| Standard operating voltage | VDD | 2 | | 3.6 | V | Standard Operating Conditions: 2.0V to 3.6V | 234 |
| RAM data retention voltage | VDR | 1.5 | | | V | | 234 |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | 0-3.3V in 0.1s | 234 |
| Brown-out Reset voltage | VBOR | 1.8 | 2.1 | 2.2 | V | | 234 |
| Operating current IDD, 2.0V, 1 MIPS | IDD | | 0.65 | 0.85 | mA | 2.0V, 1 MIPS, +85°C | 235 |
| Operating current IDD, 3.3V, 1 MIPS | IDD | | 1.2 | 1.6 | mA | 3.3V, 1 MIPS, +85°C | 235 |
| Operating current IDD, 3.3V, 4 MIPS | IDD | | 4.1 | 5.4 | mA | 3.3V, 4 MIPS, +85°C | 235 |
| Operating current IDD, 3.3V, 16 MIPS | IDD | | 15 | 20 | mA | 3.3V, 16 MIPS, +85°C | 235 |
| Operating current IDD, 3.3V, LPRC (31 kHz) | IDD | | 95 | 124 | A | 3.3V, LPRC (31 kHz), +85°C | 235 |
| Idle current IIDLE, 3.3V, 4 MIPS | IIDLE | | 0.82 | 1.1 | mA | 3.3V, 4 MIPS, +85°C | 236 |
| Idle current IIDLE, 3.3V, LPRC (31 kHz) | IIDLE | | 70 | 91 | A | 3.3V, LPRC (31 kHz), +85°C | 237 |
| Power-down current IPD, 2.5V | IPD | | 4.2 | 25 | A | 2.5V, +85°C | 238 |
| Power-down current IPD, 3.3V | IPD | | 9 | 30 | A | 3.3V, +85°C | 238 |
| Watchdog Timer current IWDT, 3.3V | IWDT | | 2.8 | 5 | A | 3.3V, +85°C | 238 |
| Input low voltage I/O pins | VIL | | | 0.2 | VDD | I/O pins | 240 |
| Input low voltage I/O pins with I2C buffer | VIL | | | 0.3 | VDD | SMBus disabled | 240 |
| Input high voltage I/O pins with analog functions | VIH | 0.8 | | | VDD | I/O pins with analog functions | 240 |
| Input high voltage MCLR | VIH | 0.8 | | | VDD | MCLR | 240 |
| CNxx pull-up current | ICNPU | 50 | 250 | 400 | A | AVDD = 3.3V, VPIN = VSS | 240 |
| Maximum load current for digital high detection with internal pull-up | IPU | | | 30 | A | VDD = 2.0V | 241 |
| Maximum load current for digital high detection with internal pull-up | IPU | | | 100 | A | VDD = 3.3V | 241 |
| Input leakage current I/O ports | IIL | | | 1 | A | AVSS ≤ VPIN ≤ VDD, pin at high-impedance | 241 |
| Input low injection current | IICL | 0 | | -5 | mA | Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS | 241 |
| Input high injection current | IICH | 0 | | 5 | mA | Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS, and all 5V tolerant pins | 241 |
| Total input injection current | IICT | -20 | | 20 | mA | Absolute instantaneous sum of all ± input injection currents from all I/O pins | 241 |
| Output low voltage all I/O pins | VOL | | | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 242 |
| Output high voltage all I/O pins | VOH | 3 | | | V | IOH = -3.0 mA, VDD = 3.6V | 242 |
| Output high voltage all I/O pins | VOH | 1.65 | | | V | IOH = -1.0 mA, VDD = 2.0V | 242 |
| Program Flash cell endurance | EP | 10000 | | | E/W | -40C to +125C | 242 |
| VDD for read | VPR | | | 3.6 | V | VMIN = Minimum operating voltage | 242 |
| VDDCORE for self-timed write | VPEW | 2.25 | | 2.75 | V | | 242 |
| Characteristic retention | TRETD | 20 | | | Year | Provided no other specifications are violated | 242 |
| External filter capacitor value | CEFC | 4.7 | 10 | | F | Series resistance < 3 Ohm recommended; < 5 Ohm required | 243 |
| Voltage regulator start-up time | TVREG | | 10 | | s | POR, BOR or when PMSLP = 1 | 243 |
| Power-up timer period | TPWRT | | 64 | | ms | DISVREG = VDD | 243 |
| Oscillator frequency HS | FOSC | 10 | | 32 | MHz | HS, -40°C ≤ TA ≤ +85°C | 245 |
| Oscillator frequency SOSC | FOSC | 31 | | 33 | kHz | SOSC | 245 |
| PLL output frequency range FSYS | FSYS | 8 | | 32 | MHz | -40°C ≤ TA ≤ +85°C | 246 |
| Instruction cycle time TCY | TCY | 62.5 | | | ns | | 245 |
| Internal FRC accuracy @ 8 MHz | | -2 | | 2 | % | +25°C | 246 |
| LPRC accuracy @ 31 kHz | | -15 | | 15 | % | +25°C | 246 |
| A/D clock period TAD | TAD | 75 | | | ns | TCY = 75 ns, AD1CON3 in default state | 249 |
## CAD (KiCad official)
- Symbol: `PIC24FJ64GA002-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic24fj64ga002-i-etched.step` / `pic24fj64ga002-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic24fj64ga002-i.step` / `pic24fj64ga002-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39881e.pdf) (278 pp, sha256 `67fd2ef41e1a2d3f`, retrieved 2026-11-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic24fj64ga002-i-datasheet.pdf)