main
Ray
Publish 0.1.0
5808e71
PIC24FJ256GB106-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-64-EP(9x9)
PIC24FJ256GB106-I from Microchip Tech, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5/PMD5/CN63 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD5 and change-notification input CN63. |
| 2 | RE6/PMD6/CN64/SCL3 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD6, change-notification input CN64 and I2C3 serial clock SCL3. |
| 3 | RE7/PMD7/CN65/SDA3 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD7, change-notification input CN65 and I2C3 serial data SDA3. |
| 4 | RG6/PMA5/C1IND/CN8/RP21 | bidirectional | PORTG digital I/O; also Comparator 1 input D (analog, so the input is limited to VDD per Section 10.2.2), PMP address PMA5, change-notification CN8 and remappable pin RP21. |
| 5 | RG7/PMA4/C1INC/CN9/RP26 | bidirectional | PORTG digital I/O; also Comparator 1 input C (analog, limited to VDD per Section 10.2.2), PMP address PMA4, change-notification CN9 and remappable pin RP26. |
| 6 | RG8/PMA3/C2IND/CN10/RP19 | bidirectional | PORTG digital I/O; also Comparator 2 input D (analog, limited to VDD per Section 10.2.2), PMP address PMA3, change-notification CN10 and remappable pin RP19. |
| 7 | MCLR | input | Master Clear (device Reset) input; brought low to cause a Reset, with VIH minimum of 0.8 VDD (DI25). |
| 8 | RG9/PMA2/C2INC/CN11/RP27 | bidirectional | PORTG digital I/O; also Comparator 2 input C (analog, limited to VDD per Section 10.2.2), PMP address PMA2, change-notification CN11 and remappable pin RP27. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 11 | RB5/AN5/C1INA/CN7/PGEC3/RP18/VBUSON | bidirectional | PORTB digital I/O; analog input AN5 limits input to VDD per Section 10.2.2; also ICSP clock PGEC3, USB OTG external charge pump control VBUSON and remappable pin RP18. |
| 12 | RB4/AN4/C1INB/CN6/PGED3/RP28/USBOEN | bidirectional | PORTB digital I/O; analog input AN4 limits input to VDD per Section 10.2.2; also ICSP data PGED3, USB output enable USBOEN for external transceiver and remappable pin RP28. |
| 13 | RB3/AN3/C2INA/CN5/VPIO | bidirectional | PORTB digital I/O; analog input AN3 limits input to VDD per Section 10.2.2; also USB Differential Plus input/output for external transceiver (VPIO). |
| 14 | RB2/AN2/C2INB/CN4/RP13/VMIO | bidirectional | PORTB digital I/O; analog input AN2 limits input to VDD per Section 10.2.2; also USB Differential Minus input/output for external transceiver (VMIO) and remappable pin RP13. |
| 15 | RB1/AN1/CN3/PGEC1/RP1/VREF- | bidirectional | PORTB digital I/O; analog input AN1 limits input to VDD per Section 10.2.2; also ICSP clock PGEC1, A/D and comparator low reference voltage input VREF- and remappable pin RP1. |
| 16 | RB0/AN0/CN2/PGED1/PMA6/RP0/VREF+ | bidirectional | PORTB digital I/O; analog input AN0 limits input to VDD per Section 10.2.2; also ICSP data PGED1, A/D and comparator high reference voltage input VREF+ and remappable pin RP0. |
| 17 | RB6/AN6/CN24/PGEC2/RP6 | bidirectional | PORTB digital I/O; analog input AN6 limits input to VDD per Section 10.2.2; also ICSP clock PGEC2 and remappable pin RP6. |
| 18 | RB7/AN7/CN25/PGED2/RP7/RCV | bidirectional | PORTB digital I/O; analog input AN7 limits input to VDD per Section 10.2.2; also ICSP data PGED2, USB receive input RCV (external transceiver) and remappable pin RP7. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether analog features are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether analog features are used. |
| 21 | RB8/AN8/CN26/RP8 | bidirectional | PORTB digital I/O; analog input AN8 limits input to VDD per Section 10.2.2; also change-notification CN26 and remappable pin RP8. |
| 22 | RB9/AN9/CN27/PMA7/RP9 | bidirectional | PORTB digital I/O; analog input AN9 limits input to VDD per Section 10.2.2; also PMP address PMA7, change-notification CN27 and remappable pin RP9. |
| 23 | RB10/AN10/CN28/CVREF/PMA13/TMS | bidirectional | PORTB digital I/O; analog input AN10 limits input to VDD per Section 10.2.2; also comparator voltage reference output CVREF, PMP address PMA13 and JTAG Test Mode Select input TMS. |
| 24 | RB11/AN11/CN29/PMA12/TDO | bidirectional | PORTB digital I/O; analog input AN11 limits input to VDD per Section 10.2.2; also PMP address PMA12 and JTAG Test Data Output TDO. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 27 | RB12/AN12/CN30/CTED2/PMA11/TCK | bidirectional | PORTB digital I/O; analog input AN12 limits input to VDD per Section 10.2.2; also CTMU external edge input CTED2, PMP address PMA11 and JTAG Test Clock TCK. |
| 28 | RB13/AN13/CN31/CTED1/PMA10/TDI | bidirectional | PORTB digital I/O; analog input AN13 limits input to VDD per Section 10.2.2; also CTMU external edge input CTED1, PMP address PMA10 and JTAG Test Data Input TDI. |
| 29 | RB14/AN14/CN32/CTPLS/PMA1/RP14 | bidirectional | PORTB digital I/O; analog input AN14 limits input to VDD per Section 10.2.2; also CTMU pulse output CTPLS, PMP address PMA1 and remappable pin RP14. |
| 30 | RB15/AN15/CN12/PMA0/REFO/RP29 | bidirectional | PORTB digital I/O; analog input AN15 limits input to VDD per Section 10.2.2; also reference clock output REFO, PMP address PMA0 and remappable pin RP29. |
| 31 | RF4/CN17/PMA9/RP10/SDA2 | bidirectional | PORTF digital I/O Schmitt Trigger; also I2C2 data SDA2, PMP address PMA9, change-notification CN17 and remappable pin RP10. |
| 32 | RF5/CN18/PMA8/RP17/SCL2 | bidirectional | PORTF digital I/O Schmitt Trigger; also I2C2 clock SCL2, PMP address PMA8, change-notification CN18 and remappable pin RP17. |
| 33 | RF3/CN71/RP16/USBID | bidirectional | PORTF digital I/O Schmitt Trigger; also USB OTG ID input (OTG mode only, USBID), change-notification CN71 and remappable pin RP16. |
| 34 | VBUS | power_in | USB Voltage, Host mode (5V). |
| 35 | VUSB | power_in | USB Voltage (3.3V). |
| 36 | D-/RG3 | bidirectional | USB Differential Minus line (internal transceiver); the same pin is also the input-only PORTG pin RG3 (Schmitt Trigger). |
| 37 | D+/RG2 | bidirectional | USB Differential Plus line (internal transceiver); the same pin is also the input-only PORTG pin RG2 (Schmitt Trigger). |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 39 | OSCI/CLKI/RC12/CN23 | input | Main Oscillator input connection (analog level input); also external clock input CLKI, PORTC digital I/O RC12 and change-notification CN23. |
| 40 | OSCO/CLKO/RC15/CN22 | output | Main Oscillator output connection; also System Clock Output CLKO, or PORTC digital I/O RC15 when CLKO is not selected, and change-notification CN22. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/DMLN/RTCC/RP2/CN53 | bidirectional | PORTD digital I/O Schmitt Trigger; also D- external pull-down control output DMLN, Real-Time Clock alarm/seconds output RTCC, remappable pin RP2 and change-notification CN53. |
| 43 | RD9/DPLN/SDA1/RP4/CN54 | bidirectional | PORTD digital I/O Schmitt Trigger; also D+ external pull-down control output DPLN, I2C1 data SDA1, remappable pin RP4 and change-notification CN54. |
| 44 | RD10/PMCS2/SCL1/RP3/CN55 | bidirectional | PORTD digital I/O Schmitt Trigger; also PMP chip select 2 strobe/address bit 14 (PMCS2), I2C1 clock SCL1, remappable pin RP3 and change-notification CN55. |
| 45 | RD11/PMCS1/RP12/CN56 | bidirectional | PORTD digital I/O Schmitt Trigger; also PMP chip select 1 strobe/address bit 15 (PMCS1), remappable pin RP12 and change-notification CN56. |
| 46 | RD0/DMH/INT0/RP11/CN49 | bidirectional | PORTD digital I/O Schmitt Trigger; also D- external pull-up control output DMH, external interrupt input INT0, remappable pin RP11 and change-notification CN49. |
| 47 | RC13/CN1/C3IND/SOSCI | bidirectional | PORTC digital I/O Schmitt Trigger; also Secondary Oscillator/Timer1 clock input SOSCI (analog), Comparator 3 input D (VDD limit) and change-notification CN1. |
| 48 | RC14/CN0/C3INC/RPI37/SOSCO/T1CK | bidirectional | PORTC digital I/O Schmitt Trigger; also Secondary Oscillator/Timer1 clock output SOSCO, Timer1 clock input T1CK, Comparator 3 input C (VDD limit), remappable input-only RPI37 and change-notification CN0. |
| 49 | RD1/VCPCON/RP24/CN50 | bidirectional | PORTD digital I/O Schmitt Trigger; also USB OTG VBUS PWM/charge pump output VCPCON, remappable pin RP24 and change-notification CN50. |
| 50 | RD2/DPH/RP23/CN51 | bidirectional | PORTD digital I/O Schmitt Trigger; also D+ external pull-up control output DPH, remappable pin RP23 and change-notification CN51. |
| 51 | RD3/PMBE/RP22/CN52 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port byte enable strobe PMBE, remappable pin RP22 and change-notification CN52. |
| 52 | RD4/PMWR/RP25/CN13 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port write strobe PMWR, remappable pin RP25 and change-notification CN13. |
| 53 | RD5/PMRD/RP20/CN14 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port read strobe PMRD, remappable pin RP20 and change-notification CN14. |
| 54 | RD6/C3INB/CN15 | bidirectional | PORTD digital I/O Schmitt Trigger; also Comparator 3 input B (analog, limited to VDD per Section 10.2.2) and change-notification CN15. |
| 55 | RD7/C3INA/CN16 | bidirectional | PORTD digital I/O Schmitt Trigger; also Comparator 3 input A (analog, limited to VDD per Section 10.2.2) and change-notification CN16. |
| 56 | VCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (low-ESR, <5 Ω required); VDDCORE supply input when the regulator is disabled, and must not be connected to VDD when the regulator is enabled. |
| 57 | ENVREG | input | Voltage Regulator Enable; tie to VDD to enable the regulator or to ground to disable it. |
| 58 | RF0/VBUSST/VCMPST1/CN68 | bidirectional | PORTF digital I/O Schmitt Trigger; also USB OTG internal charge pump feedback VBUSST (analog), USB VBUS boost comparator input VCMPST1 and change-notification CN68. |
| 59 | RF1/VCMPST2/CN69 | bidirectional | PORTF digital I/O Schmitt Trigger; also USB VBUS boost generator comparator input 2 (VCMPST2) and change-notification CN69. |
| 60 | RE0/PMD0/CN58 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD0 and change-notification CN58. |
| 61 | RE1/PMD1/CN59 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD1 and change-notification CN59. |
| 62 | RE2/PMD2/CN60 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD2 and change-notification CN60. |
| 63 | RE3/PMD3/CN61 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD3 and change-notification CN61. |
| 64 | RE4/PMD4/CN62 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD4 and change-notification CN62. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-64-EP(9x9) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 100 | °C | 311 | |||
| Storage temperature | -65 | 150 | °C | 311 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 311 | |||
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | -0.3 | V | Maximum printed as (VDD + 0.3V) | 311 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 311 | |||
| Voltage on VDDCORE with respect to VSS | -0.3 | 3 | V | 311 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 312 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 312 | ||
| DC10 Supply Voltage (regulator enabled) | VDD | 2.2 | 3.6 | V | Regulator enabled | 313 | |
| DC10 Supply Voltage (regulator disabled) | VDD | 3.6 | V | Regulator disabled | 313 | ||
| DC10 Core supply voltage VDDCORE (regulator disabled) | VDDCORE | 2 | 2.75 | V | Regulator disabled | 313 | |
| DC12 RAM Data Retention Voltage | VDR | 1.5 | V | 313 | |||
| DC17 VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 313 | ||
| DC20b Operating Current (IDD) | IDD | 0.83 | 1.2 | mA | +85°C | 314 | |
| DC20f Operating Current (IDD) | IDD | 1.1 | 1.7 | mA | +85°C | 314 | |
| DC23b Operating Current (IDD) | IDD | 3.3 | 4.5 | mA | +85°C | 314 | |
| DC23f Operating Current (IDD) | IDD | 4.3 | 6 | mA | +85°C | 314 | |
| DC24b Operating Current (IDD) | IDD | 18.2 | 24 | mA | +85°C | 314 | |
| DC24f Operating Current (IDD) | IDD | 18.2 | 24 | mA | +85°C | 314 | |
| DC31b Operating Current (IDD) | IDD | 20 | 69 | µA | +85°C | 314 | |
| DC31f Operating Current (IDD) | IDD | 95 | 145 | µA | +85°C | 314 | |
| DC40b Idle Current (IIDLE) | IIDLE | 220 | 310 | µA | +85°C | 315 | |
| DC40f Idle Current (IIDLE) | IIDLE | 300 | 420 | µA | +85°C | 315 | |
| DC43b Idle Current (IIDLE) | IIDLE | 0.87 | 1.2 | mA | +85°C | 315 | |
| DC43f Idle Current (IIDLE) | IIDLE | 1.1 | 1.4 | mA | +85°C | 315 | |
| DC47b Idle Current (IIDLE) | IIDLE | 4.4 | 5.6 | mA | +85°C | 315 | |
| DC47e Idle Current (IIDLE) | IIDLE | 4.4 | 5.6 | mA | +85°C | 315 | |
| DC50b Idle Current (IIDLE) | IIDLE | 1.1 | 1.4 | mA | +85°C | 315 | |
| DC50f Idle Current (IIDLE) | IIDLE | 1.4 | 1.8 | mA | +85°C | 315 | |
| DC51b Idle Current (IIDLE) | IIDLE | 10 | 32 | µA | +85°C | 315 | |
| DC51f Idle Current (IIDLE) | IIDLE | 70 | 132 | µA | +85°C | 315 | |
| DC60b Base Power-Down Current (IPD) | IPD | 3.7 | 18 | µA | +85°C | 316 | |
| DC60e Base Power-Down Current (IPD) | IPD | 4.2 | 27 | µA | +85°C | 316 | |
| DC60h Base Power-Down Current (IPD) | IPD | 11 | 36 | µA | +85°C | 316 | |
| DC61b Watchdog Timer Current (IWDT, additional) | IWDT | 1.75 | 3 | µA | +85°C | 316 | |
| DC61e Watchdog Timer Current (IWDT, additional) | IWDT | 2.4 | 4 | µA | +85°C | 316 | |
| DC61b (duplicate label, 3.3V row) Watchdog Timer Current (IWDT, additional) | IWDT | 2.8 | 5 | µA | +85°C | 316 | |
| DC62b RTCC + Timer1 w/32 kHz crystal (additional) | 3 | 7 | µA | +85°C | 317 | ||
| DC62e RTCC + Timer1 w/32 kHz crystal (additional) | 3 | 7 | µA | +85°C | 317 | ||
| DC62h RTCC + Timer1 w/32 kHz crystal (additional) | 4 | 10 | µA | +85°C | 317 | ||
| External Filter Capacitor Value (CEFC) | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required. | 320 | |
| Band Gap Reference Start-up Time (TBG) | TBG | 1 | ms | 320 | |||
| Package Thermal Resistance, 9x9x0.9 mm QFN (junction to ambient) | JA | 28 | °C/W | Note 1: junction to ambient, achieved by package simulation | 312 |
CAD (KiCad official)
- Symbol:
PIC24FJ256GB106-I - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
pic24fj256gb106-i-etched.step/pic24fj256gb106-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj256gb106-i.step/pic24fj256gb106-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (352 pp, sha256
7d2ee89c95aba693, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC24FJ256GB106-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-64-EP(9x9)
PIC24FJ256GB106-I from Microchip Tech, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5/PMD5/CN63 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD5 and change-notification input CN63. |
| 2 | RE6/PMD6/CN64/SCL3 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD6, change-notification input CN64 and I2C3 serial clock SCL3. |
| 3 | RE7/PMD7/CN65/SDA3 | bidirectional | PORTE digital I/O; also parallel master port data bit PMD7, change-notification input CN65 and I2C3 serial data SDA3. |
| 4 | RG6/PMA5/C1IND/CN8/RP21 | bidirectional | PORTG digital I/O; also Comparator 1 input D (analog, so the input is limited to VDD per Section 10.2.2), PMP address PMA5, change-notification CN8 and remappable pin RP21. |
| 5 | RG7/PMA4/C1INC/CN9/RP26 | bidirectional | PORTG digital I/O; also Comparator 1 input C (analog, limited to VDD per Section 10.2.2), PMP address PMA4, change-notification CN9 and remappable pin RP26. |
| 6 | RG8/PMA3/C2IND/CN10/RP19 | bidirectional | PORTG digital I/O; also Comparator 2 input D (analog, limited to VDD per Section 10.2.2), PMP address PMA3, change-notification CN10 and remappable pin RP19. |
| 7 | MCLR | input | Master Clear (device Reset) input; brought low to cause a Reset, with VIH minimum of 0.8 VDD (DI25). |
| 8 | RG9/PMA2/C2INC/CN11/RP27 | bidirectional | PORTG digital I/O; also Comparator 2 input C (analog, limited to VDD per Section 10.2.2), PMP address PMA2, change-notification CN11 and remappable pin RP27. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 11 | RB5/AN5/C1INA/CN7/PGEC3/RP18/VBUSON | bidirectional | PORTB digital I/O; analog input AN5 limits input to VDD per Section 10.2.2; also ICSP clock PGEC3, USB OTG external charge pump control VBUSON and remappable pin RP18. |
| 12 | RB4/AN4/C1INB/CN6/PGED3/RP28/USBOEN | bidirectional | PORTB digital I/O; analog input AN4 limits input to VDD per Section 10.2.2; also ICSP data PGED3, USB output enable USBOEN for external transceiver and remappable pin RP28. |
| 13 | RB3/AN3/C2INA/CN5/VPIO | bidirectional | PORTB digital I/O; analog input AN3 limits input to VDD per Section 10.2.2; also USB Differential Plus input/output for external transceiver (VPIO). |
| 14 | RB2/AN2/C2INB/CN4/RP13/VMIO | bidirectional | PORTB digital I/O; analog input AN2 limits input to VDD per Section 10.2.2; also USB Differential Minus input/output for external transceiver (VMIO) and remappable pin RP13. |
| 15 | RB1/AN1/CN3/PGEC1/RP1/VREF- | bidirectional | PORTB digital I/O; analog input AN1 limits input to VDD per Section 10.2.2; also ICSP clock PGEC1, A/D and comparator low reference voltage input VREF- and remappable pin RP1. |
| 16 | RB0/AN0/CN2/PGED1/PMA6/RP0/VREF+ | bidirectional | PORTB digital I/O; analog input AN0 limits input to VDD per Section 10.2.2; also ICSP data PGED1, A/D and comparator high reference voltage input VREF+ and remappable pin RP0. |
| 17 | RB6/AN6/CN24/PGEC2/RP6 | bidirectional | PORTB digital I/O; analog input AN6 limits input to VDD per Section 10.2.2; also ICSP clock PGEC2 and remappable pin RP6. |
| 18 | RB7/AN7/CN25/PGED2/RP7/RCV | bidirectional | PORTB digital I/O; analog input AN7 limits input to VDD per Section 10.2.2; also ICSP data PGED2, USB receive input RCV (external transceiver) and remappable pin RP7. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether analog features are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether analog features are used. |
| 21 | RB8/AN8/CN26/RP8 | bidirectional | PORTB digital I/O; analog input AN8 limits input to VDD per Section 10.2.2; also change-notification CN26 and remappable pin RP8. |
| 22 | RB9/AN9/CN27/PMA7/RP9 | bidirectional | PORTB digital I/O; analog input AN9 limits input to VDD per Section 10.2.2; also PMP address PMA7, change-notification CN27 and remappable pin RP9. |
| 23 | RB10/AN10/CN28/CVREF/PMA13/TMS | bidirectional | PORTB digital I/O; analog input AN10 limits input to VDD per Section 10.2.2; also comparator voltage reference output CVREF, PMP address PMA13 and JTAG Test Mode Select input TMS. |
| 24 | RB11/AN11/CN29/PMA12/TDO | bidirectional | PORTB digital I/O; analog input AN11 limits input to VDD per Section 10.2.2; also PMP address PMA12 and JTAG Test Data Output TDO. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 27 | RB12/AN12/CN30/CTED2/PMA11/TCK | bidirectional | PORTB digital I/O; analog input AN12 limits input to VDD per Section 10.2.2; also CTMU external edge input CTED2, PMP address PMA11 and JTAG Test Clock TCK. |
| 28 | RB13/AN13/CN31/CTED1/PMA10/TDI | bidirectional | PORTB digital I/O; analog input AN13 limits input to VDD per Section 10.2.2; also CTMU external edge input CTED1, PMP address PMA10 and JTAG Test Data Input TDI. |
| 29 | RB14/AN14/CN32/CTPLS/PMA1/RP14 | bidirectional | PORTB digital I/O; analog input AN14 limits input to VDD per Section 10.2.2; also CTMU pulse output CTPLS, PMP address PMA1 and remappable pin RP14. |
| 30 | RB15/AN15/CN12/PMA0/REFO/RP29 | bidirectional | PORTB digital I/O; analog input AN15 limits input to VDD per Section 10.2.2; also reference clock output REFO, PMP address PMA0 and remappable pin RP29. |
| 31 | RF4/CN17/PMA9/RP10/SDA2 | bidirectional | PORTF digital I/O Schmitt Trigger; also I2C2 data SDA2, PMP address PMA9, change-notification CN17 and remappable pin RP10. |
| 32 | RF5/CN18/PMA8/RP17/SCL2 | bidirectional | PORTF digital I/O Schmitt Trigger; also I2C2 clock SCL2, PMP address PMA8, change-notification CN18 and remappable pin RP17. |
| 33 | RF3/CN71/RP16/USBID | bidirectional | PORTF digital I/O Schmitt Trigger; also USB OTG ID input (OTG mode only, USBID), change-notification CN71 and remappable pin RP16. |
| 34 | VBUS | power_in | USB Voltage, Host mode (5V). |
| 35 | VUSB | power_in | USB Voltage (3.3V). |
| 36 | D-/RG3 | bidirectional | USB Differential Minus line (internal transceiver); the same pin is also the input-only PORTG pin RG3 (Schmitt Trigger). |
| 37 | D+/RG2 | bidirectional | USB Differential Plus line (internal transceiver); the same pin is also the input-only PORTG pin RG2 (Schmitt Trigger). |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; standard operating range 2.0V to 3.6V (Table 29-7). |
| 39 | OSCI/CLKI/RC12/CN23 | input | Main Oscillator input connection (analog level input); also external clock input CLKI, PORTC digital I/O RC12 and change-notification CN23. |
| 40 | OSCO/CLKO/RC15/CN22 | output | Main Oscillator output connection; also System Clock Output CLKO, or PORTC digital I/O RC15 when CLKO is not selected, and change-notification CN22. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/DMLN/RTCC/RP2/CN53 | bidirectional | PORTD digital I/O Schmitt Trigger; also D- external pull-down control output DMLN, Real-Time Clock alarm/seconds output RTCC, remappable pin RP2 and change-notification CN53. |
| 43 | RD9/DPLN/SDA1/RP4/CN54 | bidirectional | PORTD digital I/O Schmitt Trigger; also D+ external pull-down control output DPLN, I2C1 data SDA1, remappable pin RP4 and change-notification CN54. |
| 44 | RD10/PMCS2/SCL1/RP3/CN55 | bidirectional | PORTD digital I/O Schmitt Trigger; also PMP chip select 2 strobe/address bit 14 (PMCS2), I2C1 clock SCL1, remappable pin RP3 and change-notification CN55. |
| 45 | RD11/PMCS1/RP12/CN56 | bidirectional | PORTD digital I/O Schmitt Trigger; also PMP chip select 1 strobe/address bit 15 (PMCS1), remappable pin RP12 and change-notification CN56. |
| 46 | RD0/DMH/INT0/RP11/CN49 | bidirectional | PORTD digital I/O Schmitt Trigger; also D- external pull-up control output DMH, external interrupt input INT0, remappable pin RP11 and change-notification CN49. |
| 47 | RC13/CN1/C3IND/SOSCI | bidirectional | PORTC digital I/O Schmitt Trigger; also Secondary Oscillator/Timer1 clock input SOSCI (analog), Comparator 3 input D (VDD limit) and change-notification CN1. |
| 48 | RC14/CN0/C3INC/RPI37/SOSCO/T1CK | bidirectional | PORTC digital I/O Schmitt Trigger; also Secondary Oscillator/Timer1 clock output SOSCO, Timer1 clock input T1CK, Comparator 3 input C (VDD limit), remappable input-only RPI37 and change-notification CN0. |
| 49 | RD1/VCPCON/RP24/CN50 | bidirectional | PORTD digital I/O Schmitt Trigger; also USB OTG VBUS PWM/charge pump output VCPCON, remappable pin RP24 and change-notification CN50. |
| 50 | RD2/DPH/RP23/CN51 | bidirectional | PORTD digital I/O Schmitt Trigger; also D+ external pull-up control output DPH, remappable pin RP23 and change-notification CN51. |
| 51 | RD3/PMBE/RP22/CN52 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port byte enable strobe PMBE, remappable pin RP22 and change-notification CN52. |
| 52 | RD4/PMWR/RP25/CN13 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port write strobe PMWR, remappable pin RP25 and change-notification CN13. |
| 53 | RD5/PMRD/RP20/CN14 | bidirectional | PORTD digital I/O Schmitt Trigger; also Parallel Master Port read strobe PMRD, remappable pin RP20 and change-notification CN14. |
| 54 | RD6/C3INB/CN15 | bidirectional | PORTD digital I/O Schmitt Trigger; also Comparator 3 input B (analog, limited to VDD per Section 10.2.2) and change-notification CN15. |
| 55 | RD7/C3INA/CN16 | bidirectional | PORTD digital I/O Schmitt Trigger; also Comparator 3 input A (analog, limited to VDD per Section 10.2.2) and change-notification CN16. |
| 56 | VCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (low-ESR, <5 Ω required); VDDCORE supply input when the regulator is disabled, and must not be connected to VDD when the regulator is enabled. |
| 57 | ENVREG | input | Voltage Regulator Enable; tie to VDD to enable the regulator or to ground to disable it. |
| 58 | RF0/VBUSST/VCMPST1/CN68 | bidirectional | PORTF digital I/O Schmitt Trigger; also USB OTG internal charge pump feedback VBUSST (analog), USB VBUS boost comparator input VCMPST1 and change-notification CN68. |
| 59 | RF1/VCMPST2/CN69 | bidirectional | PORTF digital I/O Schmitt Trigger; also USB VBUS boost generator comparator input 2 (VCMPST2) and change-notification CN69. |
| 60 | RE0/PMD0/CN58 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD0 and change-notification CN58. |
| 61 | RE1/PMD1/CN59 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD1 and change-notification CN59. |
| 62 | RE2/PMD2/CN60 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD2 and change-notification CN60. |
| 63 | RE3/PMD3/CN61 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD3 and change-notification CN61. |
| 64 | RE4/PMD4/CN62 | bidirectional | PORTE digital I/O Schmitt Trigger; also Parallel Master Port data bit PMD4 and change-notification CN62. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-64-EP(9x9) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 65 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 100 | °C | | 311 |
| Storage temperature | | -65 | | 150 | °C | | 311 |
| Voltage on VDD with respect to VSS | | -0.3 | | 4 | V | | 311 |
| Voltage on any combined analog and digital pin and MCLR with respect to VSS | | -0.3 | | | V | Maximum printed as (VDD + 0.3V) | 311 |
| Voltage on any digital only pin with respect to VSS | | -0.3 | | 6 | V | | 311 |
| Voltage on VDDCORE with respect to VSS | | -0.3 | | 3 | V | | 311 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 312 |
| Operating Ambient Temperature Range | TA | -40 | | 85 | °C | | 312 |
| DC10 Supply Voltage (regulator enabled) | VDD | 2.2 | | 3.6 | V | Regulator enabled | 313 |
| DC10 Supply Voltage (regulator disabled) | VDD | | | 3.6 | V | Regulator disabled | 313 |
| DC10 Core supply voltage VDDCORE (regulator disabled) | VDDCORE | 2 | | 2.75 | V | Regulator disabled | 313 |
| DC12 RAM Data Retention Voltage | VDR | 1.5 | | | V | | 313 |
| DC17 VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 313 |
| DC20b Operating Current (IDD) | IDD | | 0.83 | 1.2 | mA | +85°C | 314 |
| DC20f Operating Current (IDD) | IDD | | 1.1 | 1.7 | mA | +85°C | 314 |
| DC23b Operating Current (IDD) | IDD | | 3.3 | 4.5 | mA | +85°C | 314 |
| DC23f Operating Current (IDD) | IDD | | 4.3 | 6 | mA | +85°C | 314 |
| DC24b Operating Current (IDD) | IDD | | 18.2 | 24 | mA | +85°C | 314 |
| DC24f Operating Current (IDD) | IDD | | 18.2 | 24 | mA | +85°C | 314 |
| DC31b Operating Current (IDD) | IDD | | 20 | 69 | µA | +85°C | 314 |
| DC31f Operating Current (IDD) | IDD | | 95 | 145 | µA | +85°C | 314 |
| DC40b Idle Current (IIDLE) | IIDLE | | 220 | 310 | µA | +85°C | 315 |
| DC40f Idle Current (IIDLE) | IIDLE | | 300 | 420 | µA | +85°C | 315 |
| DC43b Idle Current (IIDLE) | IIDLE | | 0.87 | 1.2 | mA | +85°C | 315 |
| DC43f Idle Current (IIDLE) | IIDLE | | 1.1 | 1.4 | mA | +85°C | 315 |
| DC47b Idle Current (IIDLE) | IIDLE | | 4.4 | 5.6 | mA | +85°C | 315 |
| DC47e Idle Current (IIDLE) | IIDLE | | 4.4 | 5.6 | mA | +85°C | 315 |
| DC50b Idle Current (IIDLE) | IIDLE | | 1.1 | 1.4 | mA | +85°C | 315 |
| DC50f Idle Current (IIDLE) | IIDLE | | 1.4 | 1.8 | mA | +85°C | 315 |
| DC51b Idle Current (IIDLE) | IIDLE | | 10 | 32 | µA | +85°C | 315 |
| DC51f Idle Current (IIDLE) | IIDLE | | 70 | 132 | µA | +85°C | 315 |
| DC60b Base Power-Down Current (IPD) | IPD | | 3.7 | 18 | µA | +85°C | 316 |
| DC60e Base Power-Down Current (IPD) | IPD | | 4.2 | 27 | µA | +85°C | 316 |
| DC60h Base Power-Down Current (IPD) | IPD | | 11 | 36 | µA | +85°C | 316 |
| DC61b Watchdog Timer Current (IWDT, additional) | IWDT | | 1.75 | 3 | µA | +85°C | 316 |
| DC61e Watchdog Timer Current (IWDT, additional) | IWDT | | 2.4 | 4 | µA | +85°C | 316 |
| DC61b (duplicate label, 3.3V row) Watchdog Timer Current (IWDT, additional) | IWDT | | 2.8 | 5 | µA | +85°C | 316 |
| DC62b RTCC + Timer1 w/32 kHz crystal (additional) | | | 3 | 7 | µA | +85°C | 317 |
| DC62e RTCC + Timer1 w/32 kHz crystal (additional) | | | 3 | 7 | µA | +85°C | 317 |
| DC62h RTCC + Timer1 w/32 kHz crystal (additional) | | | 4 | 10 | µA | +85°C | 317 |
| External Filter Capacitor Value (CEFC) | CEFC | 4.7 | 10 | | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required. | 320 |
| Band Gap Reference Start-up Time (TBG) | TBG | | | 1 | ms | | 320 |
| Package Thermal Resistance, 9x9x0.9 mm QFN (junction to ambient) | JA | | 28 | | °C/W | Note 1: junction to ambient, achieved by package simulation | 312 |
## CAD (KiCad official)
- Symbol: `PIC24FJ256GB106-I`
- Footprint: `Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm`
- 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files: `pic24fj256gb106-i-etched.step` / `pic24fj256gb106-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic24fj256gb106-i.step` / `pic24fj256gb106-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39897c.pdf) (352 pp, sha256 `7d2ee89c95aba693`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic24fj256gb106-i-datasheet.pdf)