main
Ray Publish 0.1.0 e261e2a

PIC24FJ256GA406T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC24FJ256GA406T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LCDBIAS2/IC4/CTED4/PMD5/IOCE5/RE5 bidirectional Port E digital I/O RE5 (DIG/ST) that is multiplexed with LCD charge-pump bias input LCDBIAS2, Input Capture 4, CTMU edge input CTED4, EPMP data bit PMD5 and interrupt-on-change IOCE5.
2 LCDBIAS1/SCL3/IC5/PMD6/IOCE6/RE6 bidirectional Port E digital I/O RE6 (DIG/ST) that is multiplexed with LCD charge-pump bias input LCDBIAS1, I2C3 clock SCL3, Input Capture 5, EPMP data bit PMD6 and interrupt-on-change IOCE6.
3 LCDBIAS0/SDA3/IC6/PMD7/IOCE7/RE7 bidirectional Port E digital I/O RE7 (DIG/ST) that is multiplexed with LCD charge-pump bias input LCDBIAS0, I2C3 data SDA3, Input Capture 6, EPMP data bit PMD7 and interrupt-on-change IOCE7.
4 SEG0/C1IND/RP21/ICM1/OCM1A/PMA5/IOCG6/RG6 bidirectional Port G digital I/O RG6 (DIG/ST/TTL) that is multiplexed with LCD segment output SEG0, comparator 1 input D, remappable pin RP21, MCCP1 input capture and output, EPMP address bit PMA5 and interrupt-on-change IOCG6.
5 RG7 bidirectional Port G digital I/O RG7 (DIG/ST) that is multiplexed with LCD drive charge-pump capacitor input VLCAP1, comparator 1 input C, remappable pin RP26, MCCP1 output OCM1B, EPMP address bit PMA4 and interrupt-on-change IOCG7.
6 RG8 bidirectional Port G digital I/O RG8 (DIG/ST) that is multiplexed with LCD drive charge-pump capacitor input VLCAP2, comparator 2 input D, remappable pin RP19, SCCP2 input capture and output OCM2, EPMP address bit PMA3 and interrupt-on-change IOCG8.
7 MCLR input Master Clear (device Reset) input; this line is brought low to cause a Reset.
8 RG9 bidirectional Port G digital I/O RG9 (DIG/ST) that is multiplexed with LCD segment output SEG1, comparator 1/2/3 inputs C, remappable pin RP27, DAC1 analog output, EPMP address bit PMA2 and interrupt-on-change IOCG9.
9 VSS power_in Ground reference for peripheral digital logic and I/O pins.
10 VDD power_in Positive supply for peripheral digital logic and I/O pins.
11 PGEC3/SEG2/AN5/C1INA/RP18/ICM3/OCM3/IOCB5/RB5 bidirectional Port B digital I/O RB5 (DIG/ST/TTL) that is multiplexed with ICSP programming clock PGEC3, LCD segment output SEG2, A/D analog input AN5, comparator 1 input A, remappable pin RP18, SCCP3 input capture and output and interrupt-on-change IOCB5.
12 PGED3/SEG3/AN4/C1INB/RP28/IOCB4/RB4 bidirectional Port B digital I/O RB4 (DIG/ST/TTL) that is multiplexed with ICSP programming data PGED3, LCD segment output SEG3, A/D analog input AN4, comparator 1 input B, remappable pin RP28 and interrupt-on-change IOCB4.
13 SEG4/AN3/C2INA/IOCB3/RB3 bidirectional Port B digital I/O RB3 (DIG/ST/TTL) that is multiplexed with LCD segment output SEG4, A/D analog input AN3, comparator 2 input A and interrupt-on-change IOCB3.
14 SEG5/AN2/CTCMP/C2INB/RP13/CTED13/IOCB2/RB2 bidirectional Port B digital I/O RB2 (DIG/ST/TTL) that is multiplexed with LCD segment output SEG5, A/D analog input AN2, CTMU comparator 2 input (pulse mode) CTCMP, comparator 2 input B, remappable pin RP13, CTMU edge input CTED13 and interrupt-on-change IOCB2.
15 PGEC1/SEG6/VREF-/CVREF-/AN1/AN1-/RP1/CTED12/IOCB1/RB1 bidirectional Port B digital I/O RB1 (DIG/ST) that is multiplexed with ICSP programming clock PGEC1, LCD segment output SEG6, A/D and comparator voltage reference low input VREF-/CVREF-, A/D analog inputs AN1/AN1-, remappable pin RP1, CTMU edge input CTED12 and interrupt-on-change IOCB1.
16 PGED1/SEG7/VREF+/CVREF+/DVREF+/AN0/RP0/PMA6/IOCB0/RB0 bidirectional Port B digital I/O RB0 (DIG/ST) that is multiplexed with ICSP programming data PGED1, LCD segment output SEG7, A/D and comparator voltage reference high input VREF+/CVREF+, DAC external reference DVREF+, A/D analog input AN0, remappable pin RP0, EPMP address bit PMA6 and interrupt-on-change IOCB0.
17 PGEC2/LCDBIAS3/AN6/RP6/IOCB6/RB6 bidirectional Port B digital I/O RB6 (DIG/ST) that is multiplexed with ICSP programming clock PGEC2, LCD charge-pump bias input LCDBIAS3, A/D analog input AN6, remappable pin RP6 and interrupt-on-change IOCB6.
18 PGED2/SEG63/AN7/RP7/U6TX/IOCB7/RB7 bidirectional Port B digital I/O RB7 (DIG/ST/TTL) that is multiplexed with ICSP programming data PGED2, LCD segment output SEG63, A/D analog input AN7, remappable pin RP7, UART6 transmit U6TX and interrupt-on-change IOCB7.
19 AVDD power_in Positive supply for analog modules.
20 AVSS power_in Ground reference for analog modules.
21 COM7/SEG31/AN8/RP8/PWRGT/IOCB8/RB8 bidirectional Port B digital I/O RB8 (DIG/ST) that is multiplexed with LCD common output COM7, LCD segment output SEG31, A/D analog input AN8, remappable pin RP8, real-time clock power control output PWRGT and interrupt-on-change IOCB8.
22 COM6/SEG30/AN9/TMPR/RP9/T1CK/PMA7/IOCB9/RB9 bidirectional Port B digital I/O RB9 (DIG/ST) that is multiplexed with LCD common output COM6, LCD segment output SEG30, A/D analog input AN9, tamper detect input TMPR, remappable pin RP9, Timer1 clock T1CK, EPMP address bit PMA7 and interrupt-on-change IOCB9.
23 TMS/COM5/SEG29/CVREF/AN10/SDO4/PMA13/IOCB10/RB10 bidirectional Port B digital I/O RB10 (DIG/ST) that is multiplexed with JTAG test mode select input TMS, LCD common output COM5, LCD segment output SEG29, comparator voltage reference output CVREF, A/D analog input AN10, SPI4 data output SDO4, EPMP address bit PMA13 and interrupt-on-change IOCB10; the datasheet notes a pull-up resistor is connected to this pin during programming.
24 TDO/AN11/REFI1/SS4/FSYNC4/PMA12/IOCB11/RB11 bidirectional Port B digital I/O RB11 (DIG/ST) that is multiplexed with JTAG test data output TDO, A/D analog input AN11, reference clock input REFI1, SPI4 slave select/frame sync SS4/FSYNC4, EPMP address bit PMA12 and interrupt-on-change IOCB11.
25 VSS power_in Ground reference for peripheral digital logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins.
27 TCK/SEG18/AN12/U6RX/CTED2/PMA11/IOCB12/RB12 bidirectional Port B digital I/O RB12 (DIG/ST) that is multiplexed with JTAG test clock TCK, LCD segment output SEG18, A/D analog input AN12, UART6 receive U6RX, CTMU edge input CTED2, EPMP address bit PMA11 and interrupt-on-change IOCB12.
28 TDI/SEG19/AN13/SDI4/CTED1/PMA10/IOCB13/RB13 bidirectional Port B digital I/O RB13 (DIG/ST) that is multiplexed with JTAG test data input TDI, LCD segment output SEG19, A/D analog input AN13, SPI4 data input SDI4, CTMU edge input CTED1, EPMP address bit PMA10 and interrupt-on-change IOCB13.
29 SEG8/AN14/RP14/CTED5/CTPLS/PMA1/PMALH/IOCB14/RB14 bidirectional Port B digital I/O RB14 (DIG/ST) that is multiplexed with LCD segment output SEG8, A/D analog input AN14, remappable pin RP14, CTMU edge input CTED5, CTMU pulse output CTPLS, EPMP address bit PMA1 (address latch high PMALH) and interrupt-on-change IOCB14.
30 SEG9/AN15/RP29/CTED6/PMA0/PMALL/IOCB15/RB15 bidirectional Port B digital I/O RB15 (DIG/ST) that is multiplexed with LCD segment output SEG9, A/D analog input AN15, remappable pin RP29, CTMU edge input CTED6, EPMP address bit PMA0 (address latch low PMALL) and interrupt-on-change IOCB15.
31 SEG10/RP10/SDA2/PMA9/IOCF4/RF4 bidirectional Port F digital I/O RF4 (DIG/ST) that is multiplexed with LCD segment output SEG10, remappable pin RP10, I2C2 data SDA2, EPMP address/data bit PMA9 and interrupt-on-change IOCF4.
32 SEG11/RP17/SCL2/PMA8/IOCF5/RF5 bidirectional Port F digital I/O RF5 (DIG/ST) that is multiplexed with LCD segment output SEG11, remappable pin RP17, I2C2 clock SCL2, EPMP address/data bit PMA8 and interrupt-on-change IOCF5.
33 SEG12/RP16/IOCF3/RF3 bidirectional Port F digital I/O RF3 (DIG/ST/TTL) that is multiplexed with LCD segment output SEG12, remappable pin RP16 and interrupt-on-change IOCF3.
34 SEG40/RP30/IOCF2/RF2 bidirectional Port F digital I/O RF2 (DIG/ST) that is multiplexed with LCD segment output SEG40, remappable pin RP30 and interrupt-on-change IOCF2.
35 IOCF6/RF6 bidirectional Port F digital I/O RF6 (DIG/ST) with interrupt-on-change IOCF6.
36 SDA1/IOCG3/RG3 bidirectional Port G digital I/O RG3 (DIG/ST) that is multiplexed with I2C1 data SDA1 (DIG/I2C/SMB) and interrupt-on-change IOCG3.
37 SCL1/IOCG2/RG2 bidirectional Port G digital I/O RG2 (DIG/ST) that is multiplexed with I2C1 clock SCL1 (DIG/I2C/SMB) and interrupt-on-change IOCG2.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins.
39 OSCI/CLKI/IOCC12/RC12 bidirectional Main oscillator input (OSCI/CLKI, ANA/ST) that is also port C digital I/O RC12 (DIG/ST) with interrupt-on-change IOCC12.
40 OSCO/CLKO/IOCC15/RC15 bidirectional Main oscillator output OSCO / system clock output CLKO (FOSC/2, when configured) that is also port C digital I/O RC15 with interrupt-on-change IOCC15.
41 VSS power_in Ground reference for peripheral digital logic and I/O pins.
42 SEG13/CLC4OUT/RP2/RTCC/U6RTS/U6BCLK/ICM5/IOCD8/RD8 bidirectional Port D digital I/O RD8 (DIG/ST) that is multiplexed with LCD segment output SEG13, CLC4 output, remappable pin RP2, RTCC alarm/seconds pulse output, UART6 RTS/BCLK, SCCP5 input capture ICM5 and interrupt-on-change IOCD8.
43 SEG14/RP4/PMACK2/IOCD9/RD9 bidirectional Port D digital I/O RD9 (DIG/ST) that is multiplexed with LCD segment output SEG14, remappable pin RP4, EPMP acknowledge input PMACK2 and interrupt-on-change IOCD9.
44 SEG15/C3IND/RP3/PMA15/APMCS2/IOCD10/RD10 bidirectional Port D digital I/O RD10 (DIG/ST) that is multiplexed with LCD segment output SEG15, comparator 3 input D, remappable pin RP3, EPMP address bit PMA15 or alternate chip select APMCS2, and interrupt-on-change IOCD10.
45 SEG16/C3INC/RP12/PMA14/PMCS/APMCS1/IOCD11/RD11 bidirectional Port D digital I/O RD11 (DIG/ST) that is multiplexed with LCD segment output SEG16, comparator 3 input C, remappable pin RP12, EPMP address bit PMA14 or chip select PMCS / alternate chip select APMCS1, and interrupt-on-change IOCD11.
46 SEG17/CLC3OUT/RP11/U6CTS/ICM6/INT0/IOCD0/RD0 bidirectional Port D digital I/O RD0 (DIG/ST) that is multiplexed with LCD segment output SEG17, CLC3 output, remappable pin RP11, UART6 CTS, SCCP6 input capture ICM6, external interrupt INT0 and interrupt-on-change IOCD0.
47 SOSCI/IOCC13/RC13 input Secondary oscillator / Timer1 clock input SOSCI (ST) that is also port C input RC13 with interrupt-on-change IOCC13.
48 SOSCO/SCLKI/RPI37/PWRLCLK/IOCC14/RC14 output Secondary oscillator / Timer1 clock output SOSCO, with alternate use as digital clock input SCLKI, remappable input RPI37, real-time clock 50/60 Hz clock input PWRLCLK and interrupt-on-change IOCC14 (port C input RC14).
49 SEG20/RP24/U5TX/ICM4/IOCD1/RD1 bidirectional Port D digital I/O RD1 (DIG/ST) that is multiplexed with LCD segment output SEG20, remappable pin RP24, UART5 transmit U5TX, SCCP4 input capture ICM4 and interrupt-on-change IOCD1.
50 SEG21/RP23/PMACK1/IOCD2/RD2 bidirectional Port D digital I/O RD2 (DIG/ST) that is multiplexed with LCD segment output SEG21, remappable pin RP23, EPMP acknowledge input PMACK1 and interrupt-on-change IOCD2.
51 SEG22/RP22/ICM7/PMBE0/IOCD3/RD3 bidirectional Port D digital I/O RD3 (DIG/ST) that is multiplexed with LCD segment output SEG22, remappable pin RP22, SCCP7 input capture ICM7, EPMP byte enable PMBE0 and interrupt-on-change IOCD3.
52 SEG23/RP25/PMWR/PMENB/IOCD4/RD4 bidirectional Port D digital I/O RD4 (DIG/ST) that is multiplexed with LCD segment output SEG23, remappable pin RP25, EPMP write strobe PMWR or enable strobe PMENB, and interrupt-on-change IOCD4.
53 SEG24/RP20/PMRD/PMWR/IOCD5/RD5 bidirectional Port D digital I/O RD5 (DIG/ST) that is multiplexed with LCD segment output SEG24, remappable pin RP20, EPMP read strobe / read-write signal PMRD, EPMP write strobe PMWR and interrupt-on-change IOCD5.
54 SEG25/C3INB/U5RX/OC4/IOCD6/RD6 bidirectional Port D digital I/O RD6 (DIG/ST) that is multiplexed with LCD segment output SEG25, comparator 3 input B, UART5 receive U5RX, Output Compare 4 output OC4 and interrupt-on-change IOCD6.
55 SEG26/C3INA/U5RTS/U5BCLK/OC5/IOCD7/RD7 bidirectional Port D digital I/O RD7 (DIG/ST) that is multiplexed with LCD segment output SEG26, comparator 3 input A, UART5 RTS/BCLK, Output Compare 5 output OC5 and interrupt-on-change IOCD7.
56 VCAP passive External filter capacitor connection for the on-chip voltage regulator; the VCAP pin must not be connected to VDD and must use a 10 µF capacitor connected to ground.
57 VBAT power_in Backup battery supply pin; the VBAT operating voltage is specified as 1.6 V to 3.6 V.
58 SEG27/U5CTS/OC6/IOCF0/RF0 bidirectional Port F digital I/O RF0 (DIG/ST) that is multiplexed with LCD segment output SEG27, UART5 CTS, Output Compare 6 output OC6 and interrupt-on-change IOCF0.
59 COM4/SEG47/SCK4/IOCF1/RF1 bidirectional Port F digital I/O RF1 (DIG/ST) that is multiplexed with LCD common output COM4, LCD segment output SEG47, SPI4 clock SCK4 and interrupt-on-change IOCF1.
60 COM3/PMD0/IOCE0/RE0 bidirectional Port E digital I/O RE0 (DIG/ST) that is multiplexed with LCD common output COM3, EPMP data bit PMD0 and interrupt-on-change IOCE0.
61 COM2/PMD1/IOCE1/RE1 bidirectional Port E digital I/O RE1 (DIG/ST) that is multiplexed with LCD common output COM2, EPMP data bit PMD1 and interrupt-on-change IOCE1.
62 COM1/PMD2/IOCE2/RE2 bidirectional Port E digital I/O RE2 (DIG/ST) that is multiplexed with LCD common output COM1, EPMP data bit PMD2 and interrupt-on-change IOCE2.
63 COM0/CTED9/PMD3/IOCE3/RE3 bidirectional Port E digital I/O RE3 (DIG/ST) that is multiplexed with LCD common output COM0, CTMU edge input CTED9, EPMP data bit PMD3 and interrupt-on-change IOCE3.
64 SEG62/LVDIN/CTED8/PMD4/IOCE4/RE4 bidirectional Port E digital I/O RE4 (DIG/ST) that is multiplexed with LCD segment output SEG62, low-voltage detect input LVDIN, CTMU edge input CTED8, EPMP data bit PMD4 and interrupt-on-change IOCE4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range 2 3.6 V 1
Temperature Range -40 85 °C 1
8 MHz Internal Oscillator accuracy -0.2 0.2 % with run-time self-calibration 1
Data Retention 20 years 1
High-Current Sink per I/O pin 18 mA High-Current Sink/Source feature on all I/O pins 2
High-Current Source per I/O pin 18 mA High-Current Sink/Source feature on all I/O pins 2
Maximum system clock frequency FOSCMAX 32 MHz High-speed operation without external HS crystal 191
PLL minimum input frequency 4 MHz both PLL branches 191
Primary Oscillator input frequency 48 MHz input from Primary Oscillator to PLL 191
VCAP external capacitor 10 µF connected from VCAP to ground; VCAP must not be connected to VDD 59
VCAP capacitor ESR 5 Ω low-ESR capacitor required on VCAP 59
ICSP series resistor on PGECx/PGEDx 100 Ω ESD protection; value a few tens of ohms, not to exceed 100 Ω 60
5.5V-tolerant input voltage 5.5 V shaded 5.5V-tolerant pins only; other pins limited to VDD 216

CAD (KiCad official)

  • Symbol: PIC24FJ256GA406T-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic24fj256ga406t-i-pt-etched.step / pic24fj256ga406t-i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj256ga406t-i-pt.step / pic24fj256ga406t-i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (558 pp, sha256 bd2a0f57db1d96dd, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF