Generated by kicad-footprint-generator · KiCad file format 20260206
PIC24FJ16GA002-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC24FJ16GA002-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (device Reset) input; brought low to cause a Reset, Schmitt Trigger input buffer. |
| 2 | RA0 | bidirectional | PORTA digital I/O with Schmitt Trigger input; also multiplexed as AN0 analog input, VREF+ A/D and comparator reference input, and CN2 change notification. |
| 3 | RA1 | bidirectional | PORTA digital I/O with Schmitt Trigger input; also multiplexed as AN1 analog input, VREF- A/D and comparator reference input, and CN3 change notification. |
| 4 | RB0 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN2, C2IN- comparator input, CN4, PGED1 ICSP/debug data, and RP0 remappable pin. |
| 5 | RB1 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN3, C2IN+ comparator input, CN5, PGEC1 ICSP/debug clock, and RP1 remappable pin. |
| 6 | RB2 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN4, C1IN- comparator input, CN6, SDA2 I2C2 data, and RP2 remappable pin. |
| 7 | RB3 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN5, C1IN+ comparator input, CN7, SCL2 I2C2 clock, and RP3 remappable pin. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA2 | bidirectional | PORTA digital I/O with Schmitt Trigger input; also multiplexed as CLKI/OSCI main clock/oscillator input (analog level) and CN30 change notification. |
| 10 | RA3 | bidirectional | PORTA digital I/O with Schmitt Trigger input; also multiplexed as OSCO/CLKO oscillator output or system clock output (selected by OSCIOFCN), CN29, and PMA0 parallel master port address bit 0. |
| 11 | RB4 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN1, PMBE parallel master port byte enable strobe, RP4 remappable pin, and SOSCI secondary oscillator/Timer1 clock input. |
| 12 | RA4 | bidirectional | PORTA digital I/O with Schmitt Trigger input; also multiplexed as CN0, PMA1 parallel master port address bit 1, SOSCO secondary oscillator/Timer1 clock output, and T1CK Timer1 clock input. |
| 13 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 14 | RB5 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as ASDA1 alternate I2C1 data, CN27, PGEC3 ICSP/debug clock, PMD7 parallel port data, and RP5 remappable pin. |
| 15 | RB6 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as ASCL1 alternate I2C1 clock, CN24, PGED3 ICSP/debug data, PMD6 parallel port data, and RP6 remappable pin. |
| 16 | RB7 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN23, INT0 external interrupt input, PMD5 parallel port data, and RP7 remappable pin. |
| 17 | RB8 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN22, SCL1 I2C1 clock, PMD4 parallel port data, RP8 remappable pin, and TCK JTAG test clock input. |
| 18 | RB9 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN21, SDA1 I2C1 data, PMD3 parallel port data, RP9 remappable pin, and TDO JTAG test data output. |
| 19 | DISVREG | input | Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it, Schmitt Trigger input buffer. |
| 20 | VDDCORE/VCAP | power_in | Core logic supply (VDDCORE) when the regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled, which requires a 10 µF capacitor to ground and must not be tied to VDD. |
| 21 | RB10 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN16, PGED2 ICSP/debug data, PMD2 parallel port data, RP10 remappable pin, and TDI JTAG test data input. |
| 22 | RB11 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as CN15, PGEC2 ICSP/debug clock, PMD1 parallel port data, RP11 remappable pin, and TMS JTAG test mode select input. |
| 23 | RB12 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN12 analog input, CN14, PMD0 parallel port data, and RP12 remappable pin. |
| 24 | RB13 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN11 analog input, CN13, PMRD parallel master port read strobe, and RP13 remappable pin. |
| 25 | RB14 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN10 analog input, CN12, CVREF comparator voltage reference output, PMWR parallel master port write strobe, RP14 remappable pin, and RTCC alarm output. |
| 26 | RB15 | bidirectional | PORTB digital I/O with Schmitt Trigger input; also multiplexed as AN9 analog input, CN11, PMCS1 parallel master port chip select strobe/address bit 14, and RP15 remappable pin. |
| 27 | VSS | power_in | Ground reference for logic and I/O pins. |
| 28 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | With respect to VSS | 231 | |
| Voltage on any combined analog and digital pin and MCLR, with respect to VSS | -0.3 | V | Upper limit printed as VDD + 0.3V (not numeric) | 231 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | With respect to VSS | 231 | ||
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | 3 | V | With respect to VSS | 231 | |
| Ambient temperature under bias | -40 | 135 | °C | 231 | |||
| Storage temperature | -65 | 150 | °C | 231 | |||
| Standard operating supply voltage | VDD | 2 | 3.6 | V | Standard Operating Conditions (DC characteristics table header) | 234 | |
| Operating ambient temperature, Industrial | TA | -40 | 85 | °C | Industrial: -40°C ≤ TA ≤ +85°C (DC characteristics table header) | 234 | |
| Operating Junction Temperature Range | TJ | -40 | 140 | °C | Thermal operating conditions | 233 | |
| Supply Voltage, regulator enabled | VDD | 3.6 | V | Regulator enabled | 234 | ||
| Supply Voltage, regulator disabled | VDD | 3.6 | V | Regulator disabled | 234 | ||
| Supply Voltage VDDCORE | VDDCORE | 2 | 2.75 | V | Regulator disabled | 234 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 234 | |||
| Brown-out Reset Voltage | VBOR | 1.8 | 2.1 | 2.2 | V | 234 | |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 234 | ||
| Operating Current (IDD), 1 MIPS, 2.0V | IDD | 0.65 | 0.85 | mA | 2.0V(3), 1 MIPS, -40°C; PMD bits set | 235 | |
| Operating Current (IDD), 1 MIPS, 3.3V | IDD | 1.2 | 1.6 | mA | 3.3V(4), 1 MIPS, +85°C; PMD bits set | 235 | |
| Operating Current (IDD), 16 MIPS, 3.3V | IDD | 15 | 20 | mA | 3.3V(4), 16 MIPS, +85°C; PMD bits set | 235 | |
| Base Power-Down Current (IPD), 2.0V | IPD | 0.1 | 1 | µA | 2.0V(3), -40°C; PMD bits set, PMSLP bit 0 | 238 | |
| Base Power-Down Current (IPD), 2.0V | IPD | 3.7 | 12 | µA | 2.0V(3), +85°C; PMD bits set, PMSLP bit 0 | 238 | |
| Base Power-Down Current (IPD), 3.3V | IPD | 9 | 30 | µA | 3.3V(4), +85°C; PMD bits set, PMSLP bit 0 | 238 | |
| Input Low Voltage, I/O pins with SMBus buffer | VIL | 0.8 | V | SMBus enabled | 240 | ||
| Input High Voltage, I/O pins with SMBus buffer, with analog functions | VIH | 2.1 | V | I/O pins with SMBus buffer, with analog functions (max printed as VDD) | 240 | ||
| Input High Voltage, I/O pins with SMBus buffer, digital only | VIH | 2.1 | 5.5 | V | I/O pins with SMBus buffer, digital only | 240 | |
| CNxx Pull-up Current | ICNPU | 50 | 250 | 400 | µA | AVDD = 3.3V, VPIN = VSS | 240 |
| Maximum Load Current for Digital High Detection with Internal Pull-up | IPU | 30 | µA | VDD = 2.0V | 241 | ||
| Maximum Load Current for Digital High Detection with Internal Pull-up | IPU | 100 | µA | VDD = 3.3V | 241 | ||
| Input Leakage Current, I/O ports | IIL | 1 | µA | AVSS ≤ VPIN ≤ VDD, pin at high-impedance | 241 | ||
| Input Leakage Current, MCLR | IIL | 1 | µA | AVSS ≤ VPIN ≤ VDD | 241 | ||
| Input Low Injection Current | IICL | 0 | -5 | mA | All pins except VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS | 241 | |
| Input High Injection Current | IICH | 0 | 5 | mA | All pins except VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS, and all 5V tolerant pins | 241 | |
| Output Low Voltage, All I/O pins | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 242 | ||
| Output High Voltage, All I/O pins | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 242 | ||
| Output High Voltage, All I/O pins | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 242 | ||
| Cell Endurance | EP | 10000 | E/W | -40C to +125C | 242 | ||
| VDD for Read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 242 | ||
| VDDCORE for Self-Timed Write | VPEW | 2.25 | 2.75 | V | 242 | ||
| Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 242 | ||
| Input Offset Voltage | VIOFF | 10 | 30 | mV | 243 | ||
| Input Common-Mode Voltage | VICM | 0 | V | Max printed as VDD (not numeric) | 243 | ||
| Common-Mode Rejection Ratio | CMRR | 55 | dB | 243 | |||
| Response Time | TRESP | 150 | 400 | ns | Note 1: one input at (VDD-1.5)/2, other transitions VSS to VDD | 243 | |
| Comparator Mode Change to Output Valid | TMC2OV | 10 | µs | 243 | |||
| Absolute Accuracy (comparator voltage reference) | CVRAA | 1 | LSb | 2.0V < VDD < 3.6V, -40°C < TA < +85°C | 243 | ||
| External Filter Capacitor Value | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 243 | |
| PLL Input Frequency Range | FPLLI | 3 | 8 | MHz | ECPLL, HSPLL, XTPLL modes, -40°C ≤ TA ≤ +85°C | 246 | |
| PLL Output Frequency Range | FSYS | 8 | 32 | MHz | -40°C ≤ TA ≤ +85°C | 246 | |
| PLL Start-up Time (Lock Time) | TLOCK | 2 | ms | 246 | |||
| External CLKI Frequency | FOSC | 32 | MHz | EC, -40°C ≤ TA ≤ +85°C (min printed as DC) | 245 | ||
| Instruction Cycle Time | TCY | 62.5 | ns | Max printed as DC (not numeric) | 245 | ||
| Internal FRC @ 8 MHz accuracy | F20 | -2 | 2 | % | +25°C | 246 | |
| A/D Clock Period | TAD | 75 | ns | TCY = 75 ns, AD1CON3 in default state | 249 | ||
| Throughput Rate | FCNV | 500 | ksps | AVDD ≥ 2.7V | 248 |
CAD (KiCad official)
- Symbol:
PIC24FJ16GA002-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic24fj16ga002-i-etched.step/pic24fj16ga002-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj16ga002-i.step/pic24fj16ga002-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (278 pp, sha256
67fd2ef41e1a2d3f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC24FJ16GA002-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC24FJ16GA002-I/SP