main
Ray Publish 0.1.0 a2cc3b2

PIC24FJ128GC010-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)

PIC24FJ128GC010-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AN33/SEG50/CTED3/CN82/RG15 bidirectional PORTG digital I/O RG15 with Schmitt Trigger input, 5.5V tolerant, also 12-bit A/D analog input AN33 and LCD segment SEG50.
2 VDD power_in Positive supply for peripheral digital logic and I/O pins.
3 CTED4/PMD5/LCDBIAS2/CN63/RE5 bidirectional PORTE digital I/O RE5 with Schmitt Trigger input, tolerant to VDD only, also LCD bias input LCDBIAS2 and PMP data bit PMD5.
4 PMD6/LCDBIAS1/CN64/RE6 bidirectional PORTE digital I/O RE6 with Schmitt Trigger input, tolerant to VDD only, also LCD bias input LCDBIAS1 and PMP data bit PMD6.
5 PMD7/LCDBIAS0/CN65/RE7 bidirectional PORTE digital I/O RE7 with Schmitt Trigger input, tolerant to VDD only, also LCD bias input LCDBIAS0 and PMP data bit PMD7.
6 AN8/OA1N1/SEG32/RPI38/CN45/RC1 bidirectional PORTC digital I/O RC1 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN8, Op Amp 1 inverting input OA1N1 and remappable input-only RPI38.
7 SEG51/RPI39/CN46/RC2 bidirectional PORTC digital I/O RC2 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG51 and remappable input-only RPI39.
8 AN9/SEG33/RPI40/CN47/RC3 bidirectional PORTC digital I/O RC3 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN9, LCD segment SEG33 and remappable input-only RPI40.
9 AN16/SEG52/RPI41/PMCS2/CN48/RC4 bidirectional PORTC digital I/O RC4 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN16, LCD segment SEG52 and Parallel Master Port chip select PMCS2.
10 RG6 bidirectional PORTG digital I/O RG6 with Schmitt Trigger input, tolerant to VDD only, also buffered band gap reference 2 output BGBUF2 and Timer5 external clock T5CK.
11 VLCAP1/AN18/OA1N4/C1INC/RP26/PMA4/CN9/RG7 passive LCD drive charge pump capacitor pin VLCAP1, which is shared with PORTG digital I/O RG7 (tolerant to VDD only) and A/D input AN18.
12 VLCAP2/AN19/OA1N2/C2IND/RP19/PMA3/CN10/RG8 passive LCD drive charge pump capacitor pin VLCAP2, which is shared with PORTG digital I/O RG8 (tolerant to VDD only) and A/D input AN19.
13 MCLR input Master Clear (device Reset) input with Schmitt Trigger; bringing this line low causes a device Reset.
14 AN49/OA1P0/C2INC/SEG1/DAC1/RP27/PMA2/CN11/RG9 bidirectional PORTG digital I/O RG9 with Schmitt Trigger input, tolerant to VDD only, also A/D input AN49 and DAC1 analog output.
15 VSS power_in Ground reference for logic and I/O pins.
16 VDD power_in Positive supply for peripheral digital logic and I/O pins.
17 TMS/SEG48/CTED0/CN33/RA0 bidirectional PORTA digital I/O RA0 with Schmitt Trigger input, 5.5V tolerant, also JTAG Test Mode Select input TMS and LCD segment SEG48.
18 SEG34/RPI33/PMCS1/CN66/RE8 bidirectional PORTE digital I/O RE8 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG34, remappable input-only RPI33 and Parallel Master Port chip select PMCS1.
19 AN21/SEG35/RPI34/PMA19/CN67/RE9 bidirectional PORTE digital I/O RE9 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN21, LCD segment SEG35 and PMP address bit PMA19.
20 PGEC3/AN5/OA1OUT/C1INA/SEG2/RP18/CN7/RB5 bidirectional PORTB digital I/O RB5 with Schmitt Trigger input, tolerant to VDD only, also ICSP/debug clock PGEC3 and Op Amp 1 output OA1OUT.
21 PGED3/AN4/OA1N0/C1INB/SEG3/RP28/USBOEN/CN6/RB4 bidirectional PORTB digital I/O RB4 with Schmitt Trigger input, 5.5V tolerant, also ICSP/debug data PGED3, A/D input AN4 and USB output enable USBOEN.
22 AN3/OA2OUT/C2INA/SEG4/VPIO/CN5/RB3 bidirectional PORTB digital I/O RB3 with Schmitt Trigger input, tolerant to VDD only, also A/D input AN3, Op Amp 2 output OA2OUT and USB external transceiver D+ line VPIO.
23 RB2 bidirectional PORTB digital I/O RB2 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN2, Timer4 external clock T4CK and USB external transceiver D- line VMIO.
24 RB1 bidirectional PORTB digital I/O RB1 with Schmitt Trigger input, tolerant to VDD only, also ICSP/debug clock PGEC1 and the CVREF-/AVREF- reference input (alternate location set by ALTCVREF/ALTADREF).
25 RB0 bidirectional PORTB digital I/O RB0 with Schmitt Trigger input, tolerant to VDD only, also ICSP/debug data PGED1, the CVREF+/AVREF+/DVREF+ reference input (alternate location set by ALTCVREF/ALTADREF) and buffered band gap output BGBUF1.
26 PGEC2/AN6/OA1P3/RP6/LCDBIAS3/CN24/RB6 bidirectional PORTB digital I/O RB6 with Schmitt Trigger input, tolerant to VDD only, also ICSP/debug clock PGEC2 and LCD bias input LCDBIAS3.
27 PGED2/AN7/COM6/SEG30/RP7/CN25/RB7 bidirectional PORTB digital I/O RB7 with Schmitt Trigger input, 5.5V tolerant, also ICSP/debug data PGED2 and LCD common output COM6.
28 RA9 bidirectional PORTA digital I/O RA9 with Schmitt Trigger input, tolerant to VDD only, also alternate location for the CVREF-/AVREF- reference input (set by ALTCVREF/ALTADREF) and LCD segment SEG36.
29 RA10 bidirectional PORTA digital I/O RA10 with Schmitt Trigger input, tolerant to VDD only, also alternate location for the CVREF+/AVREF+ reference input (set by ALTCVREF/ALTADREF) and LCD segment SEG37.
30 AVDD power_in Positive supply for analog modules; must be connected regardless of whether analog modules are used.
31 AVSS power_in Ground reference for analog modules; must be connected regardless of whether analog modules are used.
32 SVSS power_in Ground reference for the Sigma-Delta A/D converter; must be connected regardless of whether the module is used.
33 CH0+ passive Sigma-Delta A/D converter channel 0 non-inverting analog input.
34 CH0- passive Sigma-Delta A/D converter channel 0 inverting analog input.
35 CH1+/SVREF+ passive Sigma-Delta A/D converter channel 1 non-inverting analog input, also the Sigma-Delta voltage reference input (high) SVREF+.
36 CH1-/CH1SE/SVREF- passive Sigma-Delta A/D converter channel 1 inverting analog input, also single-ended channel 1 input CH1SE and voltage reference input (low) SVREF-.
37 SVDD power_in Positive supply for the Sigma-Delta A/D converter.
38 TCK/AN26/SEG31/CN34/RA1 bidirectional PORTA digital I/O RA1 with Schmitt Trigger input, 5.5V tolerant, also JTAG test clock input TCK and A/D input AN26.
39 AN27/SEG53/RP31/CN76/RF13 bidirectional PORTF digital I/O RF13 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN27, LCD segment SEG53 and remappable pin RP31.
40 SEG54/RPI32/CTED7/PMA18/CN75/RF12 bidirectional PORTF digital I/O RF12 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG54 and remappable input-only RPI32.
41 AN12/COM5/SEG18/T1CK/CTED2/PMA11/CN30/RB12 bidirectional PORTB digital I/O RB12 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN12, LCD common output COM5 and Timer1 external clock T1CK.
42 AN13/OA2P3/SEG19/DAC2/CTED1/PMA10/CN31/RB13 bidirectional PORTB digital I/O RB13 with Schmitt Trigger input, tolerant to VDD only, also A/D input AN13, Op Amp 2 input OA2P3 and DAC2 analog output.
43 AN14/OA2N4/SEG8/RP14/CTED5/CTPLS/PMA1/CN32/RB14 bidirectional PORTB digital I/O RB14 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN14 and CTMU pulse output CTPLS.
44 AN15/SEG9/RP29/T2CK/REFO/CTED6/PMA0/CN12/RB15 bidirectional PORTB digital I/O RB15 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN15, Timer2 external clock T2CK and reference clock output REFO.
45 VSS power_in Ground reference for logic and I/O pins.
46 VDD power_in Positive supply for peripheral digital logic and I/O pins.
47 AN28/SEG38/RPI43/CN20/RD14 bidirectional PORTD digital I/O RD14 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN28, LCD segment SEG38 and remappable input-only RPI43.
48 AN29/SEG39/RP5/CN21/RD15 bidirectional PORTD digital I/O RD15 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN29, LCD segment SEG39 and remappable pin RP5.
49 AN11/OA2N3/SEG10/RP10/SDA2/T3CK/PMA9/CN17/RF4 bidirectional PORTF digital I/O RF4 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN11, I2C2 data SDA2 (alternate location set by I2C2SEL) and Timer3 external clock T3CK.
50 CVREF/AN10/OA2P2/SEG11/RP17/SCL2/PMA8/CN18/RF5 bidirectional PORTF digital I/O RF5 with Schmitt Trigger input, 5.5V tolerant, also comparator voltage reference output CVREF, A/D input AN10 and I2C2 clock SCL2 (alternate location set by I2C2SEL).
51 AN30/SEG12/RP16/USBID/PMA12/CN71/RF3 bidirectional PORTF digital I/O RF3 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN30 and USB OTG ID input USBID (OTG mode only).
52 AN31/SEG40/RP30/CN70/RF2 bidirectional PORTF digital I/O RF2 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN31, LCD segment SEG40 and remappable pin RP30.
53 AN32/SEG41/RP15/CN74/RF8 bidirectional PORTF digital I/O RF8 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN32, LCD segment SEG41 and remappable pin RP15.
54 VBUS/CN83/RF7 power_in USB VBUS connection (5V nominal); the pin also carries PORTF digital I/O RF7 with Schmitt Trigger input, 5.5V tolerant.
55 VUSB3V3 power_in USB transceiver power input (3.3V nominal), which must be connected regardless of whether the USB module is used.
56 D-/CN73/RG3 bidirectional USB D- differential line of the internal transceiver, which shares PORTG digital I/O RG3 (tolerant to VDD only) when the USB module is disabled.
57 D+/CN72/RG2 bidirectional USB D+ differential line of the internal transceiver, which shares PORTG digital I/O RG2 (tolerant to VDD only) when the USB module is disabled.
58 SEG55/SCL2/CN35/RA2 bidirectional PORTA digital I/O RA2 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG55 and I2C2 clock SCL2 (alternate location).
59 SEG56/SDA2/PMA20/CN36/RA3 bidirectional PORTA digital I/O RA3 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG56 and I2C2 data SDA2 (alternate location).
60 TDI/AN36/SEG29/PMA21/CN37/RA4 bidirectional PORTA digital I/O RA4 with Schmitt Trigger input, 5.5V tolerant, also JTAG test data input TDI and A/D input AN36.
61 TDO/AN37/SEG28/CN38/RA5 bidirectional PORTA digital I/O RA5 with Schmitt Trigger input, 5.5V tolerant, also JTAG test data output TDO and A/D input AN37.
62 VDD power_in Positive supply for peripheral digital logic and I/O pins.
63 OSCI/CLKI/CN23/RC12 input Main oscillator / external clock input (OSCI/CLKI), which shares PORTC digital I/O RC12 (tolerant to VDD only).
64 OSCO/CLKO/CN22/RC15 output Main oscillator output (OSCO) or system clock output (CLKO, FOSC/2) depending on configuration, which shares PORTC digital I/O RC15 (tolerant to VDD only).
65 VSS power_in Ground reference for logic and I/O pins.
66 AN38/SEG42/RPI36/SCL1/OCTRIG2/PMA22/CN43/RA14 bidirectional PORTA digital I/O RA14 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN38, I2C1 clock SCL1 and Output Compare external trigger 2 OCTRIG2.
67 AN39/SEG43/RPI35/SDA1/PMBE1/CN44/RA15 bidirectional PORTA digital I/O RA15 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN39, I2C1 data SDA1 and remappable input-only RPI35.
68 AN40/SEG13/RP2/RTCC/DMLN/OCTRIG1/PMA13/CN53/RD8 bidirectional PORTD digital I/O RD8 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN40, RTCC alarm/seconds pulse output RTCC and Output Compare external trigger 1 OCTRIG1.
69 AN24/SEG14/RP4/DPLN/PMACK2/CN54/RD9 bidirectional PORTD digital I/O RD9 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN24 and D+ external pull-down control output DPLN.
70 AN41/C3IND/SEG15/RP3/PMA15/CS2/CN55/RD10 bidirectional PORTD digital I/O RD10 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN41, comparator 3 input D and Parallel Master Port chip select CS2.
71 AN42/OA2P0/C3INC/SEG16/RP12/PMA14/CS1/CN56/RD11 bidirectional PORTD digital I/O RD11 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN42, Op Amp 2 input OA2P0, comparator 3 input C and Parallel Master Port chip select CS1.
72 AN43/OA2N0/SEG17/RP11/VCMPST3/DMH/INT0/CN49/RD0 bidirectional PORTD digital I/O RD0 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN43, external interrupt INT0 and USB VBUS external comparator input VCMPST3.
73 SOSCI/RC13 input Secondary oscillator input (SOSCI), which shares PORTC RC13, an input-only pin tolerant to VDD only.
74 PWRLCLK/SOSCO/SCLKI/RPI37/RC14 input Power line (50/60 Hz) external clock input for the RTCC, which shares secondary oscillator pins SOSCO and SCLKI and input-only PORTC RC14 (tolerant to VDD only).
75 VSS power_in Ground reference for logic and I/O pins.
76 AN35/SEG20/RP24/CN50/RD1 bidirectional PORTD RD1 is an analog-capable pin with no ANSx bit; using it for AN35 would cause a worst-case increase in device current consumption of 500 µA.
77 AN25/OA2N1/SEG21/RP23/DPH/PMACK1/CN51/RD2 bidirectional PORTD digital I/O RD2 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN25, Op Amp 2 input OA2N1 and D+ external pull-up control output DPH.
78 AN44/OA2P4/SEG22/RP22/PMBE0/CN52/RD3 bidirectional PORTD digital I/O RD3 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN44, Op Amp 2 input OA2P4 and Parallel Master Port byte enable PMBE0.
79 AN45/SEG44/RPI42/PMD12/CN57/RD12 bidirectional PORTD digital I/O RD12 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN45, LCD segment SEG44, remappable input-only RPI42 and PMP data bit PMD12.
80 AN46/SEG45/PMD13/CN19/RD13 bidirectional PORTD digital I/O RD13 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN46, LCD segment SEG45 and PMP data bit PMD13.
81 AN47/OA1P4/SEG23/RP25/PMWR/CN13/RD4 bidirectional PORTD digital I/O RD4 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN47, Op Amp 1 input OA1P4 and Parallel Master Port write strobe PMWR.
82 AN48/OA1N1/SEG24/RP20/PMRD/CN14/RD5 bidirectional PORTD digital I/O RD5 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN48, Op Amp 1 input OA1N1 and Parallel Master Port read strobe PMRD.
83 AN34/OA1P2/C3INB/SEG25/PMD14/CN15/RD6 bidirectional PORTD digital I/O RD6 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN34, Op Amp 1 input OA1P2, comparator 3 input B and PMP data bit PMD14.
84 AN20/C3INA/SEG26/PMD15/CN16/RD7 bidirectional PORTD digital I/O RD7 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN20, comparator 3 input A and PMP data bit PMD15.
85 VCAP passive External filter capacitor connection for the on-chip voltage regulator, which requires a 10 µF capacitor to ground and must not be connected to VDD.
86 VBAT power_in Backup battery (B+) input for VBAT operation.
87 COM7/SEG27/VCMPST1/PMD11/CN68/RF0 bidirectional PORTF digital I/O RF0 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM7 and USB VBUS external comparator input VCMPST1.
88 COM4/SEG47/VCMPST2/PMD10/CN69/RF1 bidirectional PORTF digital I/O RF1 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM4 and USB VBUS external comparator input VCMPST2.
89 SEG46/PMD9/CN78/RG1 bidirectional PORTG digital I/O RG1 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG46 and PMP data bit PMD9.
90 SEG49/PMD8/CN77/RG0 bidirectional PORTG digital I/O RG0 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG49 and PMP data bit PMD8.
91 AN23/SEG57/CN39/RA6 bidirectional PORTA digital I/O RA6 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN23 and LCD segment SEG57.
92 AN22/SEG58/PMA17/CN40/RA7 bidirectional PORTA digital I/O RA7 with Schmitt Trigger input, 5.5V tolerant, also A/D input AN22, LCD segment SEG58 and PMP address bit PMA17.
93 COM3/PMD0/CN58/RE0 bidirectional PORTE digital I/O RE0 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM3 and PMP data bit PMD0.
94 COM2/PMD1/CN59/RE1 bidirectional PORTE digital I/O RE1 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM2 and PMP data bit PMD1.
95 SEG59/CTED11/PMA16/CN81/RG14 bidirectional PORTG digital I/O RG14 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG59, CTMU external edge input CTED11 and PMP address bit PMA16.
96 SEG60/CN79/RG12 bidirectional PORTG digital I/O RG12 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG60.
97 SEG61/CTED10/CN80/RG13 bidirectional PORTG digital I/O RG13 with Schmitt Trigger input, 5.5V tolerant, also LCD segment SEG61 and CTMU external edge input CTED10.
98 COM1/PMD2/CN60/RE2 bidirectional PORTE digital I/O RE2 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM1 and PMP data bit PMD2.
99 COM0/CTED9/PMD3/CN61/RE3 bidirectional PORTE digital I/O RE3 with Schmitt Trigger input, 5.5V tolerant, also LCD common output COM0, CTMU external edge input CTED9 and PMP data bit PMD3.
100 HLVDIN/SEG62/CTED8/PMD4/CN62/RE4 bidirectional PORTE digital I/O RE4 with Schmitt Trigger input, 5.5V tolerant, also High/Low-Voltage Detect input HLVDIN and LCD segment SEG62.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-100(12x12)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range 2 3.6 V Standard Operating Conditions 439
Operating temperature (Industrial) TA -40 85 °C Industrial 439
USB supply voltage VUSB3V3 3.3 3.6 V USB module enabled; printed min is 'Greater of: 3.0 or (VDD, 0.3V)' 439
USB supply voltage, USB disabled, RG2/RG3 unused VUSB3V3 3.6 V USB disabled, RG2/RG3 are unused and externally pulled low or left in a high-impedance state; printed min is (VDD, 0.3V) 439
USB supply voltage, USB disabled, RG2/RG3 as GPIO VUSB3V3 3.6 V USB disabled, RG2/RG3 are used as general purpose I/O; printed min is (VDD, 0.3V) 439
Input voltage on 5.5V-tolerant pins 5.5 V 5.5V-tolerant pins (e.g., PORTB<15:14,12,7,4,2>, PORTD<15:0>); VDD-only pins tolerate only VDD 187
High-current sink per I/O pin 18 mA All I/O pins (High-Current Sink/Source 18 mA/18 mA) 2
High-current source per I/O pin 18 mA All I/O pins (High-Current Sink/Source 18 mA/18 mA) 2
8 MHz internal oscillator accuracy -0.2 0.2 % With run-time self-calibration (FRC self-tune) 2
Maximum CPU operating frequency 32 MHz Up to 16 MIPS operation 2
12-bit high-speed A/D conversion rate 10 Msps Up to 10 Msps conversion rate 1
VCAP capacitor minimum DC rating 16 V Ceramic capacitor on VCAP 36
Total capacitance across VBUS and ground 10 µF Bus Power mode; USB OTG inrush current requirement 269
VCAP external capacitor tolerance -10 10 % Base tolerance of suitable VCAP capacitors (Table 2-1) 35
VCAP external capacitor (CEFC) CEFC 10 µF VCAP to VSS; ceramic or tantalum, ESR < 5 Ω; VCAP must not be connected to VDD 35
D+ built-in pull-up resistor 1.5 kΩ Device mode; engaged by USBEN and USBPWR 269
D+ and D- built-in pull-down resistors 15 kΩ Host and OTG mode; engaged by HOSTEN 270
Decoupling capacitor per power pin pair 0.1 µF 25V or 50V, X7R dielectric ceramic, low-ESR; placed on each VDD/VSS and AVDD/AVSS pair 34

CAD (KiCad official)

  • Symbol: PIC24FJ128GC010-I
  • Footprint: Package_QFP:TQFP-100_12x12mm_P0.4mm
  • 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
  • 3D model files: pic24fj128gc010-i-etched.step / pic24fj128gc010-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj128gc010-i.step / pic24fj128gc010-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (504 pp, sha256 0feacdfee854238f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF