component
PIC24FJ128GC006-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC24FJ128GC006-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC24FJ128GC006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTED4/PMD5/LCDBIAS2/CN63/RE5 | bidirectional | PORTE digital I/O with Schmitt Trigger input that tolerates only VDD per Table 11-2, also used as LCD bias input LCDBIAS2, CTMU edge input CTED4 and parallel master port data PMD5. |
| 2 | PMD6/LCDBIAS1/CN64/RE6 | bidirectional | PORTE digital I/O with Schmitt Trigger input that tolerates only VDD per Table 11-2, also used as LCD bias input LCDBIAS1 and parallel master port data PMD6. |
| 3 | PMD7/LCDBIAS0/CN65/RE7 | bidirectional | PORTE digital I/O with Schmitt Trigger input that tolerates only VDD per Table 11-2, also used as LCD bias input LCDBIAS0 and parallel master port data PMD7. |
| 4 | RG6 | bidirectional | PORTG digital I/O that tolerates only VDD per Table 11-2, also used as buffered band gap reference 2 output BGBUF2 and 12-bit A/D input AN17. |
| 5 | VLCAP1/AN18/OA1N4/C1INC/RP26/PMA4/CN9/RG7 | passive | LCD drive charge pump capacitor pin VLCAP1 that requires an external capacitor, also shared with analog input AN18 and PORTG I/O RG7 (VDD tolerant only). |
| 6 | VLCAP2/AN19/OA1N3/C2IND/RP19/PMA3/CN10/RG8 | passive | LCD drive charge pump capacitor pin VLCAP2 that requires an external capacitor, also shared with analog input AN19 and PORTG I/O RG8 (VDD tolerant only). |
| 7 | MCLR | input | Active-low Master Clear input that causes a device Reset when brought low, with Schmitt Trigger buffer and VIH minimum of 0.8 VDD. |
| 8 | AN49/OA1P0/C2INC/SEG1/DAC1/RP27/PMA2/CN11/RG9 | bidirectional | PORTG digital I/O that tolerates only VDD per Table 11-2, also used as analog input AN49, op amp 1 positive input OA1P0 and DAC1 analog output. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins, specified for 2.0 V to 3.6 V operation. |
| 11 | PGEC3/AN5/OA1OUT/C1INA/SEG2/RP18/CN7/RB5 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as ICSP/debug clock PGEC3, analog input AN5 and op amp 1 output OA1OUT. |
| 12 | PGED3/AN4/OA1N0/C1INB/SEG3/RP28/USBOEN/CN6/RB4 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as ICSP/debug data PGED3, analog input AN4 and USB output enable USBOEN. |
| 13 | AN3/OA2OUT/C2INA/SEG4/VPIO/CN5/RB3 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as analog input AN3, op amp 2 output OA2OUT and USB D+ external transceiver I/O VPIO. |
| 14 | RB2 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN2, CTMU comparator input CTCMP and USB D- external transceiver I/O VMIO. |
| 15 | RB1 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as ICSP/debug clock PGEC1, analog input AN1 and comparator/A/D reference input CVREF-/AVREF-. |
| 16 | RB0 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as ICSP/debug data PGED1, analog input AN0, reference inputs CVREF+/AVREF+/DVREF+ and buffered band gap reference 1 output BGBUF1. |
| 17 | PGEC2/AN6/OA1P3/RP6/LCDBIAS3/CN24/RB6 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as ICSP/debug clock PGEC2, analog input AN6 and LCD bias input LCDBIAS3. |
| 18 | PGED2/AN7/COM6/SEG30/RP7/CN25/RB7 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as ICSP/debug data PGED2, analog input AN7 and LCD common output COM6. |
| 19 | AVDD | power_in | Positive supply for analog modules that must be connected regardless of whether analog features are used. |
| 20 | AVSS | power_in | Ground reference for analog modules that must be connected regardless of whether analog features are used. |
| 21 | SVSS | power_in | Ground reference for the sigma-delta A/D converter that must be connected regardless of whether it is used. |
| 22 | CH0+ | input | Sigma-Delta A/D converter channel 0 non-inverting analog input. |
| 23 | CH0- | input | Sigma-Delta A/D converter channel 0 inverting analog input. |
| 24 | CH1+/SVREF+ | input | Sigma-Delta A/D converter channel 1 non-inverting analog input, also the sigma-delta voltage reference (high) input SVREF+. |
| 25 | CH1-/CH1SE/SVREF- | input | Sigma-Delta A/D converter channel 1 inverting analog input, alternately single-ended channel 1 input CH1SE, and voltage reference (low) input SVREF-. |
| 26 | SVDD | power_in | Positive supply for the sigma-delta A/D converter that must be connected regardless of whether it is used. |
| 27 | TCK/AN12/COM5/SEG18/T1CK/CTED2/PMA11/CN30/RB12 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as JTAG test clock TCK, analog input AN12, LCD common output COM5 and Timer1 external clock T1CK. |
| 28 | TDI/AN13/OA2P3/SEG19/DAC2/CTED1/PMA10/CN31/RB13 | bidirectional | PORTB digital I/O that tolerates only VDD per Table 11-2, also used as JTAG test data input TDI, analog input AN13 and DAC2 analog output. |
| 29 | RB14 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as JTAG test data output TDO, analog input AN14 and CTMU pulse output CTPLS. |
| 30 | AN15/SEG9/RP29/T2CK/REFO/CTED6/PMA0/CN12/RB15 | bidirectional | PORTB digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN15, Timer2 external clock T2CK and reference clock output REFO. |
| 31 | AN11/OA2N3/SEG10/RP10/SDA2/T3CK/PMA9/CN17/RF4 | bidirectional | PORTF digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN11, I2C2 data SDA2 and Timer3 external clock T3CK. |
| 32 | CVREF/AN10/OA2P2/SEG11/RP17/SCL2/PMA8/CN18/RF5 | bidirectional | PORTF digital I/O that tolerates 5.5 V per Table 11-2, also used as comparator voltage reference output CVREF, analog input AN10 and I2C2 clock SCL2. |
| 33 | AN30/SEG12/RP16/USBID/PMA12/CN71/RF3 | bidirectional | PORTF digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN30 and USB OTG ID input USBID (OTG mode only). |
| 34 | VBUS/CN83 | power_in | USB VBUS connection with 5 V nominal input to the USB module. |
| 35 | VUSB3V3 | power_in | USB transceiver power input with 3.3 V nominal that must be connected regardless of whether the USB module is used. |
| 36 | D-/CN73/RG3 | bidirectional | USB differential minus line of the internal transceiver, also PORTG I/O RG3 which tolerates only VDD per Table 11-2. |
| 37 | D+/CN72/RG2 | bidirectional | USB differential plus line of the internal transceiver, also PORTG I/O RG2 which tolerates only VDD per Table 11-2. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins, specified for 2.0 V to 3.6 V operation. |
| 39 | OSCI/CLKI/CN23/RC12 | input | Main oscillator and external clock input (OSCI/CLKI), with the PORTC RC12 I/O sharing the pin and tolerating only VDD per Table 11-2. |
| 40 | OSCO/CLKO/CN22/RC15 | output | Main oscillator output (OSCO) or system clock output CLKO (FOSC/2), selected by the OSCIOFCN configuration bit, otherwise PORTC I/O RC15 which tolerates only VDD. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | AN40/SEG13/RP2/RTCC/DMLN/OCTRIG1/PMA13/CN53/RD8 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN40, RTCC alarm output RTCC and output compare trigger OCTRIG1. |
| 43 | AN24/SEG14/RP4/SDA1/DPLN/PMACK2/CN54/RD9 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN24 and I2C1 data SDA1. |
| 44 | AN41/C3IND/SEG15/RP3/SCL1/PMA15/CS2/CN55/RD10 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN41, comparator 3 input C3IND and I2C1 clock SCL1. |
| 45 | RD11 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as JTAG test mode select TMS, analog input AN42 and op amp 2 input OA2P0. |
| 46 | AN43/OA2N0/SEG17/RP11/VCMPST3/DMH/INT0/CN49/RD0 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN43, external interrupt INT0 input and D- external pull-up control output DMH. |
| 47 | SOSCI/RC13 | input | Secondary oscillator input SOSCI, also PORTC input-only pin RC13 (cannot be configured as an output) that tolerates only VDD per Table 11-2. |
| 48 | PWRLCLK/SOSCO/RPI37/SCLKI/RC14 | input | Power line (50/60 Hz) clock input PWRLCLK for RTCC, also secondary oscillator output SOSCO, remappable input-only RPI37 and input-only PORTC RC14 that tolerates only VDD per Table 11-2. |
| 49 | AN35/SEG20/RP24/CN50/RD1 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2; RD1 has no ANSx bit, and using it for AN35 increases worst-case device current by 500 µA. |
| 50 | AN25/OA2N1/SEG21/RP23/DPH/PMACK1/CN51/RD2 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN25, op amp 2 input OA2N1 and D+ external pull-up control output DPH. |
| 51 | AN44/OA2P4/SEG22/RP22/PMBE0/CN52/RD3 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN44, op amp 2 input OA2P4 and parallel master port byte enable PMBE0. |
| 52 | AN47/OA1P4/SEG23/RP25/PMWR/CN13/RD4 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN47, op amp 1 input OA1P4 and parallel master port write strobe PMWR. |
| 53 | AN48/OA1N1/SEG24/RP20/PMRD/CN14/RD5 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN48, op amp 1 input OA1N1 and parallel master port read strobe PMRD. |
| 54 | AN34/OA1P2/C3INB/SEG25/CN15/RD6 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN34, op amp 1 input OA1P2 and comparator 3 input C3INB. |
| 55 | AN20/C3INA/SEG26/CN16/RD7 | bidirectional | PORTD digital I/O that tolerates 5.5 V per Table 11-2, also used as analog input AN20 and comparator 3 input C3INA. |
| 56 | VCAP | passive | External filter capacitor connection for the on-chip voltage regulator, requiring a 10 µF capacitor to ground with ESR below 5 Ω and not to be connected to VDD. |
| 57 | VBAT | power_in | Backup battery (B+) input for VBAT operation. |
| 58 | COM7/SEG27/VCMPST1/CN68/RF0 | bidirectional | PORTF digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM7, LCD segment SEG27 and USB VBUS external comparator input VCMPST1. |
| 59 | COM4/SEG47/VCMPST2/CN69/RF1 | bidirectional | PORTF digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM4, LCD segment SEG47 and USB VBUS external comparator input VCMPST2. |
| 60 | COM3/PMD0/CN58/RE0 | bidirectional | PORTE digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM3 and parallel master port data PMD0. |
| 61 | COM2/PMD1/CN59/RE1 | bidirectional | PORTE digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM2 and parallel master port data PMD1. |
| 62 | COM1/PMD2/CN60/RE2 | bidirectional | PORTE digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM1 and parallel master port data PMD2. |
| 63 | COM0/CTED9/PMD3/CN61/RE3 | bidirectional | PORTE digital I/O that tolerates 5.5 V per Table 11-2, also used as LCD common output COM0, CTMU external edge input CTED9 and parallel master port data PMD3. |
| 64 | HLVDIN/SEG62/CTED8/PMD4/CN62/RE4 | bidirectional | PORTE digital I/O that tolerates 5.5 V per Table 11-2, also used as high/low-voltage detect input HLVDIN, LCD segment SEG62 and CTMU external edge input CTED8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | 2 | 3.6 | V | 2 | |||
| Operating Frequency | 32 | MHz | 16 |
CAD (KiCad official)
- Symbol:
PIC24FJ128GC006-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj128gc006-i-pt-etched.step/pic24fj128gc006-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj128gc006-i-pt.step/pic24fj128gc006-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (504 pp, sha256
0feacdfee854238f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).